ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Tech Talk

Notices

Reply
 
Thread Tools
Old January 8th, 2019, 10:10 AM   #1
CoffinBuilder38
ninjette.org newbie
 
Name: Leeroy
Location: North Austin, TX
Join Date: Jan 2019

Motorcycle(s): 2011 Ninja 250EX

Posts: 2
Question Exhaust slip-on fit?

Hi I'm new to this thread, so if this is in the wrong place forgive my ignorance.

I'm trying to buy a slip-on exhaust but can't find the size I need anywhere. Do I need 38mm? 51mm? I want to buy the right size to avoid any welding, because that would defeat the purpose for me. Any help would be appreciated.
CoffinBuilder38 is offline   Reply With Quote




Old January 8th, 2019, 10:46 AM   #2
maverick9611
"a legend in my own mind"
 
maverick9611's Avatar
 
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017

Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro,

Posts: A lot.
MOTM - Feb '18
you need something like this. el cheapo mufflers from Ali Express come with this adapter. this is sold buy itself

by the way welcome
__________________________________________________
"trying not to get old"
maverick9611 is offline   Reply With Quote


Old January 8th, 2019, 10:49 AM   #3
maverick9611
"a legend in my own mind"
 
maverick9611's Avatar
 
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017

Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro,

Posts: A lot.
MOTM - Feb '18
check out my el cheapo exhaust threads. might save some cash.
__________________________________________________
"trying not to get old"
maverick9611 is offline   Reply With Quote


Old January 8th, 2019, 12:42 PM   #4
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Factory exhaust is 35mm OD where factory muffler slips on. Factory pipe is offset and angled from muffler; you'll notice inlet of muffer is angled and offset to match.

Option-1 Cone Adapter - Tip of cone-adapter is slightly large for factory exhaust (38mm). Shim with couple layers of soda/beer can. Due to offset of factory pipe, it will bring muffler very close to swingarm if it's an oval canister. Round mufflers will hit swingarm if used with cone-adapter.

Option-2 Angled adapter - this adapter does not need shimming to fit factory pipe. Its angled outlet will let you use any muffler with centre inlet.

Attached Images
File Type: png MufflerAdapter.png (172.1 KB, 31 views)

Last futzed with by DannoXYZ; January 8th, 2019 at 02:57 PM.
DannoXYZ is offline   Reply With Quote


Old January 9th, 2019, 11:15 AM   #5
Ceeloo Yello
ninjette.org guru
 
Name: C
Location: Hawaii
Join Date: May 2011

Motorcycle(s): 250

Posts: 472
Good info here.
__________________________________________________
"It ended up being the loose nut behind the wheel"
Ceeloo Yello is offline   Reply With Quote


Old January 9th, 2019, 05:16 PM   #6
CoffinBuilder38
ninjette.org newbie
 
Name: Leeroy
Location: North Austin, TX
Join Date: Jan 2019

Motorcycle(s): 2011 Ninja 250EX

Posts: 2
Awesome that's exactly what I needed! Thanks y'all!!
CoffinBuilder38 is offline   Reply With Quote


Old January 9th, 2019, 06:34 PM   #7
maverick9611
"a legend in my own mind"
 
maverick9611's Avatar
 
Name: maverick9611
Location: Augusta,Georgia
Join Date: May 2017

Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro,

Posts: A lot.
MOTM - Feb '18
great, introduce yourself and your ride.
__________________________________________________
"trying not to get old"
maverick9611 is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
How to remove stock exhaust and install aftermarket Slip-On Exhaust System Ninja 300 SON1C 2013 - 2017 Ninja 300 Tech Talk 4 August 14th, 2014 05:45 PM
slip-on exhaust KVR 2008 - 2012 Ninja 250R Tech Talk 2 April 11th, 2009 07:40 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 07:33 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.