March 29th, 2012, 06:06 PM | #1 |
ninjette.org member
Name: Jen
Location: NYC
Join Date: Jan 2012 Motorcycle(s): 2010 Kawasaki Ninja 250 Special Edition Posts: 95
|
Trying to remove the airbox....
So I'm trying to remove the airbox and I am down to the last screw, but it is right against the frame/rear passenger peg (bottom left of airbox) and I have no idea how to get a screw driver in there. Any advice??
|
|
March 29th, 2012, 07:15 PM | #2 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
pic's pls so we can c what we are looking @
__________________________________________________
THE GOOD LIFE |
|
March 29th, 2012, 07:17 PM | #3 |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
It is a pain to get out. I had already taken off my exhaust and passenger pegs when I took mine off. You might have to take off the peg. It should be pretty easy to come out the back if you take out the rear wheel too.
|
|
March 29th, 2012, 07:19 PM | #4 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Take the peg off, there is one behind it
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
March 29th, 2012, 07:25 PM | #5 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
i hate that 1 make sure to not lose it
__________________________________________________
THE GOOD LIFE |
|
March 30th, 2012, 10:20 PM | #6 |
ninjette.org member
Name: Jen
Location: NYC
Join Date: Jan 2012 Motorcycle(s): 2010 Kawasaki Ninja 250 Special Edition Posts: 95
|
I took the footpeg off, did you guys remove the rear liner? I guess that's the only way this shitbox is coming out
|
|
March 30th, 2012, 11:05 PM | #7 |
ninjette.org guru
Name: Mike
Location: Vancouver, British Columbia
Join Date: Aug 2011 Motorcycle(s): RED 2010 Ninja 250r Posts: 304
|
I don't honestly remember how I got that screw out. Try long enough and you will figure it out.
If I were you, I would just take the rear-wheel and mudflap thing off and pull it out the rear. I spent hours trying to get mine out the top (I didn't have a rear stand at the time), and ended up taking a jigsaw to it and going ape s**** and destroying it |
|
March 30th, 2012, 11:35 PM | #8 | |
ninjette.org guru
Name: Samual
Location: Utah
Join Date: Dec 2011 Motorcycle(s): 2010 Ninja 250r (RIP) Posts: 258
|
Quote:
|
|
|
March 31st, 2012, 01:22 AM | #9 | |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
Quote:
For me, nothing was more satisfying than getting that stupid box out (in terms of mods). I think it took me longer to get the pods on though (hard a rough time without using the airbox headers because I tore one).
__________________________________________________
Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja |
|
|
April 5th, 2012, 11:29 PM | #10 | |
ninjette.org guru
Name: Mike
Location: Vancouver, British Columbia
Join Date: Aug 2011 Motorcycle(s): RED 2010 Ninja 250r Posts: 304
|
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do I remove this | reroka | 2008 - 2012 Ninja 250R Tech Talk | 7 | June 10th, 2014 06:58 PM |
remove and reinstall carbs - stock airbox | red | 2008 - 2012 Ninja 250R Tech Talk | 22 | July 16th, 2013 07:09 PM |
'08+ Airbox | Countersteer | Motorcycle-related | 0 | June 10th, 2012 12:50 PM |
To remove or not to remove?? | extremez31 | General Motorcycling Discussion | 13 | April 18th, 2012 07:54 AM |
FI Bike Remove Airbox or performance air filter | menno | 2008 - 2012 Ninja 250R Tech Talk | 3 | October 5th, 2010 02:01 PM |
|
|