March 15th, 2011, 03:04 AM | #1 |
total N00B
Name: Rob
Location: Toronto
Join Date: Oct 2010 Motorcycle(s): 2008 Kawasaki Ninja 250r Posts: 117
|
Wanted 3mm Washers for shimming
Hey fellas,
A friend and I are looking for 3mm washers for shimming our ninjettes. We've been around town looking and have had little luck and bad customer service. So, I had to resort to this. If anyone has spares and could mail them to me, it would be great. I messaged the guys in the other threads that are offering but have had no replies I am in need for 8. 2 under each needle for 2 bikes. Thank You all for the help I've already received and will continue to do so. This forum rules. |
|
March 15th, 2011, 04:39 AM | #2 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Where have you looked for them? My local Lowes has them. Radio Shack does too.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
March 15th, 2011, 06:18 AM | #3 |
Ninja Dog
Name: Brady
Location: Sunset, UT
Join Date: Dec 2010 Motorcycle(s): 2011 Kawasaki Ninja ZX-14 Posts: 186
|
I just bought a 100-pack set of washers at Radio Shack for $2, the pack contains 20 #4 washers.
__________________________________________________
ALL YOUR NINJA ARE BELONG TO US! |
|
March 15th, 2011, 11:41 AM | #4 |
ninjette.org guru
Name: Doyle
Location: Quad Cities,Il
Join Date: Mar 2010 Motorcycle(s): 2000 Hayabusa 2009 Ninja 250R Posts: 318
|
I bought 6 3mm washer's from true value hrdware..
3 under each needle..
__________________________________________________
busastampede.com |
|
March 15th, 2011, 07:40 PM | #5 |
total N00B
Name: Rob
Location: Toronto
Join Date: Oct 2010 Motorcycle(s): 2008 Kawasaki Ninja 250r Posts: 117
|
The few Lowes and Home Depots in my area did not have them. We don't have Radio Shack, its now The Source and they didn't have them either. The search continues....
|
|
March 15th, 2011, 07:41 PM | #6 |
Join Date: Nov 2008 Posts: Too much.
|
no one in Toronto has either 3mm or #4 SAE washers? How about autoparts stores?
|
|
March 17th, 2011, 12:13 AM | #7 |
total N00B
Name: Rob
Location: Toronto
Join Date: Oct 2010 Motorcycle(s): 2008 Kawasaki Ninja 250r Posts: 117
|
|
|
March 17th, 2011, 06:40 AM | #8 |
ninjette.org certified postwhore
Name: Frugal
Location: Dallas/Fort Worth (DFW)
Join Date: Mar 2010 Motorcycle(s): Several Posts: A lot.
|
Canadians use metric, so SAE is probably as hard to find there as metric is here. My local Lowe's had the washers in stock, plenty of them, but a fairly limited selection of metric hardware.
|
|
March 17th, 2011, 06:45 AM | #9 |
ninjette.org member
Name: John
Location: Caledonia, Ontario, Canada
Join Date: Jul 2010 Motorcycle(s): Honda, Buell, Kawasaki, Suzuki, Yamaha Posts: 170
|
TSC, Home Depot, Lowes, Home Hardware, Canadian Tire..... the list goes on. You need to look! Both SAE or Metric. Take your verniers along and measure.
|
|
March 17th, 2011, 09:22 AM | #10 |
Smoker
Name: Bob
Location: SoCal
Join Date: Dec 2010 Motorcycle(s): Guess.... Posts: 556
|
Instead of being so focused on getting the EXACT washers, take your needle with you and find ones that fit.
|
|
March 18th, 2011, 11:32 AM | #11 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
not sure if you're a amazon prime member or not, but they sell these. I used these exact washers on my bike when I shimmed it. Only $. 76.
http://www.amazon.com/Du-Bro-2109-Fl...0472527&sr=8-4 I happen to have a prime membership. PM me if you want me to get these for you.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
March 18th, 2011, 12:03 PM | #12 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
March 20th, 2011, 12:38 AM | #13 |
total N00B
Name: Rob
Location: Toronto
Join Date: Oct 2010 Motorcycle(s): 2008 Kawasaki Ninja 250r Posts: 117
|
Thank you all for the support so far.
Natalie: I might take you up on that offer. Let me look around first before I give you the trouble. Kelly: Thanks for asking others to mail me some washers if they have extra, I always hope for that but it'd be too easy.... So I'll be going into town (Toronto) next weekend for a mass search of these washers and also to check out this new bike showroom/apparel place that opened up. I am sure I'll be successful then. I'll keep you guys posted. |
|
March 20th, 2011, 06:35 AM | #14 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Can I mail stuff to Canada for the usual $.44 stamp? I've got extras I can just stick in an envelope and mail to you. Just PM me the address
|
|
March 21st, 2011, 05:29 PM | #15 |
total N00B
Name: Rob
Location: Toronto
Join Date: Oct 2010 Motorcycle(s): 2008 Kawasaki Ninja 250r Posts: 117
|
I would like to thank everyone that helped me with suggestions and ideas.
But special thanks goes to choneofakind. He had spare washers and took down my address to see how much it would cost to ship them to me. Instead, he just shipped it and didn't even ask me to pay. I am truly thankful sir. I was gonna make a trip to Toronto just searching for washers. I am amazed by the good people this forum has and will definitely not think when I am able to return the favor for somebody. Hats off, choneofakind, thank you very much. |
|
March 21st, 2011, 06:06 PM | #16 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
glad i could help. man you're making me blush over here haha
post up again once they get delivered |
|
March 21st, 2011, 07:06 PM | #17 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
March 21st, 2011, 07:23 PM | #18 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Well it was actually $1.29, so that would be 3 stamps. Still not bad considering how far it's going
and I guess it's ok to mail stuff through the UNITED STATES postal service to CANADA... I asked the guy behind the counter and he said it was no big deal. who knew? |
|
March 24th, 2011, 10:16 AM | #19 |
ninjette.org member
Name: Scott
Location: MI
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R, 2014 Kawasaki Ninja 300 SE ABS Posts: 47
|
I would also like to take the time to thank all of the people on this forum for all of the great advice, suggestions, help and some good reads . It has greatly helped me in many ways to understand my bike as this is my first bike.
I would like to especially thank nattygirl for also taking time and money to send me the 3mm washers. I looked everywhere locally as well to look for those washers and had no luck in finding them as well. Natalie did not even asked for any reimbursement of any sort. I truly thank you! |
|
March 24th, 2011, 06:20 PM | #20 |
ninjette.org guru
Name: Doyle
Location: Quad Cities,Il
Join Date: Mar 2010 Motorcycle(s): 2000 Hayabusa 2009 Ninja 250R Posts: 318
|
Awesome!!!
__________________________________________________
busastampede.com |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Washers for carb shimming | broilmebk | Free stuff! | 1 | June 15th, 2014 02:56 PM |
3mm washers | indr | 2008 - 2012 Ninja 250R Tech Talk | 3 | December 11th, 2010 11:32 AM |
Need 3mm washers for some shimming? Come get'm | Hokie11 | 2008 - 2012 Ninja 250R Tech Talk | 16 | November 30th, 2010 11:21 AM |
3mm washer for shimming?? | cbowman78 | 2008 - 2012 Ninja 250R Tech Talk | 9 | October 7th, 2010 02:46 PM |
FREE!!! 3MM Washers for Shimming Your Carb Needles | kkim | 2008 - 2012 Ninja 250R Tech Talk | 1 | September 10th, 2010 02:26 AM |
|
|