My White Ninja 250R SE Thread. - Page 3

Mr.E · November 2nd, 2011, 09:15 PM

Thanks Max, you were right btw. The grips get dirty quick lol. I think they'll look real nice with the pazzos and front brake reservoir cap though.

@Eric: Nope lol. I've had them since I've been going to the meet up. I dont think you ever looked at my bike before though lol

Trailerboy531 · November 3rd, 2011, 12:01 AM

Where did you get the red front reservoir cap?

Mr.E · November 3rd, 2011, 12:26 AM

http://www.probolt-usa.com/Products/..._Ninja_250R_08

Trailerboy531 · November 3rd, 2011, 12:47 AM

uh oh... i could spend a lot of money here...

NickNYC · November 3rd, 2011, 01:01 AM

Just in case any one needs a fix of SlimeGreen.
Posted via Mobile Device

NickNYC · November 3rd, 2011, 01:03 AM

I do really like the white SE's.
Posted via Mobile Device

sousuke86 · November 5th, 2011, 09:55 AM

OoOoooO... ZX-2R stickers. Mind if i bite off you? haha

Mr.E · November 5th, 2011, 02:11 PM

Not at all, I got the idea off of someone else lmao. I got them off of ModMy250.com for real cheap.

Mr.E · November 5th, 2011, 02:24 PM

It must be the point in time where you realize you're the fastest color and want to remind others it's still a 250

Alex · November 5th, 2011, 02:39 PM

Quote:

Originally Posted by Mr.E

It must be the point in time where you realize you're the fastest color...

... if you own a red one ...

Mr.E · November 12th, 2011, 06:01 PM

So I installed red bar ends, red front brake cap, and red fuel cap screws. Here's a nice picture of it:

Only bad thing is, I tightened my right bar end way too tight, and when I went out for a ride my throttle was sticking. So I had to turn back. Tried getting it off, but the bolt is rather crappy, and stripped right away. I didnt want to have to screw it off and ride without a bar end again, especially since I finally got these on, so I just cut off part of my grip that was rubbing against the bar end.

I did a bad job at the cut, but its not enough to bother me, just yet....

^ As you can see, pretty crappy job. I was pissed at the time so yeah... lol. I was thinking, maybe I could get new grips, cut open the bottom, and glue in on the bar, with the open cut on the bottom so no one would notice, but Im not sure. I'd need some good glue just to make sure it doesnt come off.

Till it bothers me enough, I'll keep it the way it is right now. :-\

Sorry for all the bad quality pics btw, I've been using my phone mostly for all the pictures. Im still meaning to get around to that video. I have red pazzos coming in wednesday. So Im excited.

So far everything anodized, from the rearsets, to the bar ends, cap, and screws, all match, and Im very pleased with the look :-)

saxnbass · December 2nd, 2011, 07:22 PM

*Taps fingers on desk* Still waiting for updated pics with the Pazzos and whatever you've done since I've last seen it, since you couldn't come to meetup last night

Mr.E · December 9th, 2011, 12:30 AM

Pazzo's. It's a bad picture, taken on my cell, but I'll get a better one soon lol. Just been so busy.

Trailerboy531 · December 9th, 2011, 12:58 AM

damnnnn those pazzos look hot! Bring that bike to So. Cal I wanna check it out!

Heed · December 9th, 2011, 11:39 AM

i wish they made '12 white ninjas so badly..

saxnbass · December 9th, 2011, 11:51 AM

Yeah, me too, cause I'd have a white one for sure, not a black one. When I was shopping, nobody could get me a white one. I'm happy with the way my black one is looking though, so I'm not too upset about it anymore.

Mr.E · December 9th, 2011, 01:21 PM

Yeah, I think the reason they sold me my bike so expensive is because it's hard to find around here.

flynjay · December 9th, 2011, 02:04 PM

BTW... If you are looking for fasteners. Best place to look is Ace hardware stores. Or any hardware store for that matter. Homedepot and Lowes are Home improvement stores and their fastener selection sucks.

I found stainless flathead hex drive screws that look factory when installed.

NDspd · December 9th, 2011, 02:13 PM

Where can I get a rear seat cowling?

Mr.E · December 9th, 2011, 04:37 PM

@ Jason, fasteners for the bar ends??

@ Jeremy, I got mine from the kawasaki dealership. You can do that, and Im sure you can look over online.

saxnbass · December 10th, 2011, 12:14 PM

Since he's bad at updating his own thread :P

We shimmed his needles last night and he also got a dark smoke Hot Bodies DB screen

Mr.E · December 10th, 2011, 02:35 PM

For the record, not sure if there is a slight power loss or not... i think so... but dont know why and cant exactly nail if there is or not.

Mr.E · December 10th, 2011, 02:38 PM

By power loss I mean acceleration "kick". Cant tell if its as fast as before or not. Going on a ride soon, will see if I can pull away from everyone or not. I think Im fine and it was just cause I was riding at like 6 am.

flynjay · December 12th, 2011, 07:41 AM

Quote:

Originally Posted by Mr.E

@ Jason, fasteners for the bar ends??

Yep.

M8x1.25 x 50mm Stainless, Flat head, Hex Drive

This is what you are looking for. For some reason I cannot get the specific fastener listing to link. The one I'm talking about is on pg 3115 of thier electronic cataloge

To remove the bar ends I drilled the head of the stock phillips screw. Removed the bar end.
Heated the exposed screw with a torch to loosen the red loctite.
Then used a pair of pliers to turn the screw.

When reinstalling the new bar end screws, I ran a M8 tap in the threads to clean out the old loctite. Then reinstalled using blue loctite.

NicoleH28 · December 14th, 2011, 08:59 PM

Looks like you got quite a few ideas from what I did to my bike, lol.

Where did you get your rearsets?

Mr.E · December 14th, 2011, 09:16 PM

Quote:

Originally Posted by NicoleH28

Looks like you got quite a few ideas from what I did to my bike, lol.

Where did you get your rearsets?

Indeed! Im pretty sure I said that in the original post, but if not I'll go ahead and add it in lol.

I got the rearsets from

http://www.bohemianracing.com/index....k=1&Itemid=169

lol

NicoleH28 · December 15th, 2011, 09:24 AM

It's all good

Thanks.

Mr.E · December 20th, 2011, 12:32 AM

Quote:

Originally Posted by NicoleH28

It's all good

Thanks.

As for an update on the bike and all motorcycle related stuff:

Pulled out my snorkle friday, also put it back in friday night because after riding it a little, I notice it really ran horrible. It runs good now and what not. Trying to see my gas milage, I feel like it's been really weird lately, but cant tell.

Im trying to finally start vlogging, even though I already did 2 official ones, I want to redo since the mic quality was rather, loud. I couldnt find my mic, so I ordered a new one today for only $16, which is about 10 to 15 dollars cheaper then what I would have had if I got it from the actual site. Expecting it thursday. Finally going to get the youtube channel running and what not correctly. Any who, I will update the forum with pictures soon Better ones. I just cant find my camera... x-)

saxnbass · December 20th, 2011, 09:16 AM

You using the 407E name? I'm still trying to figure out a motovlogging name for myself; my camera is supposed to get here today.

Mr.E · December 20th, 2011, 11:52 AM

Yeah, since I can't access my MrE407 account. :-\

saxnbass · January 1st, 2012, 05:13 PM

I am confused by the above post.

NDspd · January 1st, 2012, 06:37 PM

Quote:

Originally Posted by saxnbass

I am confused by the above post.

What's to be confused about? I'm a photographer and so is my friend, so we worked together to photograph the above shots. The guy standing in a few of those is me.

saxnbass · January 1st, 2012, 08:06 PM

Yes, but why post your bike in a thread that is all about someone else's bike?

pilotgeorge747 · January 1st, 2012, 10:17 PM

Quote:

Originally Posted by saxnbass

Yes, but why post your bike in a thread that is all about someone else's bike?

Probaly thought it was a thread for "White SE Ninjas"?

Mr.E · January 1st, 2012, 10:58 PM

either way, cool pictures

Mr.E · January 21st, 2012, 09:39 PM

A couple updated shots. Doing this from my phone, so hopefully they're the right ones. a daytime pic and a night time one i just took now at work lol. Hotbodies windscreen. Pazzos. ect.

Future things I want:
Clips ons, Possibly red preload adjusters from japan, carbon fiber tank huggers and new grips. x-)

On a skillful note, I rode the highway for the first time ever tonight. Greatest thrill ever. Ive done 60 to 75 before, but on empty streets and not legally or for long lol. The high way was awesome, a lot less scary then what i imagined. Not getting cocky though. I was gripping the tank pretty tight. But it was so much fun lol.

NickNYC · January 21st, 2012, 09:59 PM

Looks good! Yeah hugging the tank is always fun.
Posted via Mobile Device

Malicious Logic · January 21st, 2012, 11:14 PM

Quote:

Originally Posted by Mr.E

A couple updated shots. Doing this from my phone, so hopefully they're the right ones. a daytime pic and a night time one i just took now at work lol. Hotbodies windscreen. Pazzos. ect.

Future things I want:
Clips ons, Possibly red preload adjusters from japan, carbon fiber tank huggers and new grips. x-)

On a skillful note, I rode the highway for the first time ever tonight. Greatest thrill ever. Ive done 60 to 75 before, but on empty streets and not legally or for long lol. The high way was awesome, a lot less scary then what i imagined. Not getting cocky though. I was gripping the tank pretty tight. But it was so much fun lol.

Bike looks good man. Did it handle better or worse than you expected once you got on the highway?

Mr.E · January 22nd, 2012, 07:04 AM

It actually handled the same. A bit better if anything, because on normal streets my tires have been feeling.... woobly? But when i got to work I checked my tire pressure and realized they're pretty low, so that was the issue. But on the highway I didnt notice lol. The ninja handles great. People on bigger bikes or from the dealership would tell you otherwise, but thats horse raddish. You may get knocked around a little if there's lots of wind, but thats about it, besides the crazy cagers. lol

muh.sanukri · January 22nd, 2012, 01:17 PM

nice bike

November 2nd, 2011, 09:15 PM	#81
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Thanks Max, you were right btw. The grips get dirty quick lol. I think they'll look real nice with the pazzos and front brake reservoir cap though. @Eric: Nope lol. I've had them since I've been going to the meet up. I dont think you ever looked at my bike before though lol __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

November 3rd, 2011, 12:26 AM	#83
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	http://www.probolt-usa.com/Products/..._Ninja_250R_08 __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

November 5th, 2011, 02:11 PM	#88
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Not at all, I got the idea off of someone else lmao. I got them off of ModMy250.com for real cheap. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

November 5th, 2011, 02:24 PM	#89
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	It must be the point in time where you realize you're the fastest color and want to remind others it's still a 250 __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

November 12th, 2011, 06:01 PM	#91
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	So I installed red bar ends, red front brake cap, and red fuel cap screws. Here's a nice picture of it: Only bad thing is, I tightened my right bar end way too tight, and when I went out for a ride my throttle was sticking. So I had to turn back. Tried getting it off, but the bolt is rather crappy, and stripped right away. I didnt want to have to screw it off and ride without a bar end again, especially since I finally got these on, so I just cut off part of my grip that was rubbing against the bar end. I did a bad job at the cut, but its not enough to bother me, just yet.... ^ As you can see, pretty crappy job. I was pissed at the time so yeah... lol. I was thinking, maybe I could get new grips, cut open the bottom, and glue in on the bar, with the open cut on the bottom so no one would notice, but Im not sure. I'd need some good glue just to make sure it doesnt come off. Till it bothers me enough, I'll keep it the way it is right now. :-\ Sorry for all the bad quality pics btw, I've been using my phone mostly for all the pictures. Im still meaning to get around to that video. I have red pazzos coming in wednesday. So Im excited. So far everything anodized, from the rearsets, to the bar ends, cap, and screws, all match, and Im very pleased with the look :-) __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

November 3rd, 2011, 12:01 AM	#82
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Where did you get the red front reservoir cap?

November 3rd, 2011, 12:47 AM	#84
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	uh oh... i could spend a lot of money here...

November 3rd, 2011, 01:01 AM	#85
NickNYC ninjette.org guru Name: Nick Location: Brooklyn Join Date: Sep 2011 Motorcycle(s): :( Posts: 275	Just in case any one needs a fix of SlimeGreen. Posted via Mobile Device

November 3rd, 2011, 01:03 AM	#86
NickNYC ninjette.org guru Name: Nick Location: Brooklyn Join Date: Sep 2011 Motorcycle(s): :( Posts: 275	I do really like the white SE's. Posted via Mobile Device

November 5th, 2011, 09:55 AM	#87
sousuke86 ninjette.org member Name: David Location: San Diego, CA Join Date: Sep 2011 Motorcycle(s): 2011 Ninja 250R SE Posts: 78	OoOoooO... ZX-2R stickers. Mind if i bite off you? haha

December 2nd, 2011, 07:22 PM	#92
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	Taps fingers on desk Still waiting for updated pics with the Pazzos and whatever you've done since I've last seen it, since you couldn't come to meetup last night

December 9th, 2011, 12:30 AM	#93
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Pazzo's. It's a bad picture, taken on my cell, but I'll get a better one soon lol. Just been so busy. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

December 9th, 2011, 12:58 AM	#94
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	damnnnn those pazzos look hot! Bring that bike to So. Cal I wanna check it out!

December 9th, 2011, 11:39 AM	#95
Heed ninjette.org certified postwhore Name: John Location: Illinois Join Date: Aug 2011 Motorcycle(s): None yet, yet. Posts: A lot.	i wish they made '12 white ninjas so badly.. __________________________________________________ The Rush is Addictive

December 9th, 2011, 11:51 AM	#96
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	Yeah, me too, cause I'd have a white one for sure, not a black one. When I was shopping, nobody could get me a white one. I'm happy with the way my black one is looking though, so I'm not too upset about it anymore.

December 9th, 2011, 01:21 PM	#97
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Yeah, I think the reason they sold me my bike so expensive is because it's hard to find around here. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

December 9th, 2011, 02:04 PM	#98
flynjay ninjette.org guru Name: Jason Location: Houston, TX Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 250 (sold), '06 Ninja 650R Posts: 455	BTW... If you are looking for fasteners. Best place to look is Ace hardware stores. Or any hardware store for that matter. Homedepot and Lowes are Home improvement stores and their fastener selection sucks. I found stainless flathead hex drive screws that look factory when installed.

December 9th, 2011, 02:13 PM	#99
NDspd 1/4 English, 3/4 Kick Ass Name: Jeremy Location: Dayton, OH Join Date: Sep 2011 Motorcycle(s): 2002 Triumph Speed Triple 955i, '05 Suzuki SV650S(retired), '11 Ninja 250R(sold) Posts: A lot.	Where can I get a rear seat cowling?

December 9th, 2011, 04:37 PM	#100
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	@ Jason, fasteners for the bar ends?? @ Jeremy, I got mine from the kawasaki dealership. You can do that, and Im sure you can look over online. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

December 10th, 2011, 12:14 PM	#101
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	Since he's bad at updating his own thread :P We shimmed his needles last night and he also got a dark smoke Hot Bodies DB screen

December 10th, 2011, 02:35 PM	#102
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	For the record, not sure if there is a slight power loss or not... i think so... but dont know why and cant exactly nail if there is or not. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

December 10th, 2011, 02:38 PM	#103
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	By power loss I mean acceleration "kick". Cant tell if its as fast as before or not. Going on a ride soon, will see if I can pull away from everyone or not. I think Im fine and it was just cause I was riding at like 6 am. __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

December 14th, 2011, 08:59 PM	#105
NicoleH28 ninjette.org member Name: Nicole Location: Wisconsin Join Date: Mar 2011 Motorcycle(s): 2011 Ninja 250r Special Edition White & 2006 Suzuki GSXR 600 Posts: 153	Looks like you got quite a few ideas from what I did to my bike, lol. Where did you get your rearsets?

December 15th, 2011, 09:24 AM	#107
NicoleH28 ninjette.org member Name: Nicole Location: Wisconsin Join Date: Mar 2011 Motorcycle(s): 2011 Ninja 250r Special Edition White & 2006 Suzuki GSXR 600 Posts: 153	It's all good Thanks.

December 20th, 2011, 09:16 AM	#109
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	You using the 407E name? I'm still trying to figure out a motovlogging name for myself; my camera is supposed to get here today.

December 20th, 2011, 11:52 AM	#110
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	Yeah, since I can't access my MrE407 account. :-\ __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

January 1st, 2012, 05:13 PM	#111
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	I am confused by the above post.

January 1st, 2012, 08:06 PM	#113
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	Yes, but why post your bike in a thread that is all about someone else's bike?

January 1st, 2012, 10:58 PM	#115
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	either way, cool pictures __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

January 21st, 2012, 09:59 PM	#117
NickNYC ninjette.org guru Name: Nick Location: Brooklyn Join Date: Sep 2011 Motorcycle(s): :( Posts: 275	Looks good! Yeah hugging the tank is always fun. Posted via Mobile Device

January 22nd, 2012, 07:04 AM	#119
Mr.E That rider dude. Name: Eric Location: Orlando, Fl. Join Date: Apr 2011 Motorcycle(s): 2011 White Ninja 250 SE. Posts: A lot.	It actually handled the same. A bit better if anything, because on normal streets my tires have been feeling.... woobly? But when i got to work I checked my tire pressure and realized they're pretty low, so that was the issue. But on the highway I didnt notice lol. The ninja handles great. People on bigger bikes or from the dealership would tell you otherwise, but thats horse raddish. You may get knocked around a little if there's lots of wind, but thats about it, besides the crazy cagers. lol __________________________________________________ Mods: flushmount Led front binkers, diode mod, pazzo levers, clear tank pad, racing replica grips, bike monkeys integrated tal light, zx-2r vinyls, rearsets, red bar ends, and more red accented stuff.

January 22nd, 2012, 01:17 PM	#120
muh.sanukri ninjette.org member Name: sanuhasna Location: indonesia Join Date: Jan 2012 Motorcycle(s): kawasaki Ninja 250R Posts: 22	nice bike

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another White Ninja 250R SE Thread	sousuke86	Pictures	43	February 17th, 2013 12:20 AM
k24_cm7's update/picture thread (10' Ninja 250r SE)	k24_cm7	Pictures	41	April 18th, 2012 10:32 AM
Ninja 250R Pearl White TW	TiagoW	Pictures	36	April 9th, 2012 01:44 PM
Ninja 250R Defect Thread	jonthechron	2008 - 2012 Ninja 250R Tech Talk	78	October 7th, 2011 01:56 AM
Sakura~ 2011 250r Pearl White/Ebony Progress Thread	warlord	Pictures	40	July 6th, 2011 03:13 PM