[ridermagazine.com] - New Gear: PowerDeck Motorcycle Loading System from Aumsville

[Ninjette Newsbot]

Capable of hauling motorcycles, ATVs, snowmobiles, and other vehicles, the PowerDeck motorcycle loading system from Aumsville Equipment Sales pairs with the AmeriDeck lift system to lift machines from the ground to the bed of a truck with the push of a button. See all of Rider‘s Parts & Accessories Reviews here. The PowerDeck comes in […]

The post New Gear: PowerDeck Motorcycle Loading System from Aumsville first appeared on Rider Magazine.


Capable of hauling motorcycles, ATVs, snowmobiles, and other vehicles, the PowerDeck motorcycle loading system from Aumsville Equipment Sales pairs with the AmeriDeck lift system to lift machines from the ground to the bed of a truck with the push of a button.

See all of Rider‘s Parts & Accessories Reviews here.

The PowerDeck comes in two versions: long bed (96 inches long) or short bed (78 inches long).

When in the pickup, the deck sits just above the pickup wheel wells, keeping the center of gravity low and providing storage under the deck.


The PowerDeck can also be used for material transport and other types of hauling. It features 2,500 lb of loading and dump capacity, a 45-degree rear approach angle, up to a 55-degree dump angle, easy-access tie-down points, and structural steel construction. The AmeriDeck and PowerDeck systems fit a wide variety of trucks.


Visit the Aumsville Equipment Sales website for a quote.

The post New Gear: PowerDeck Motorcycle Loading System from Aumsville first appeared on Rider Magazine.