What Did You Do to Your Ninjette Today ?? - Page 165

csmith12 · April 7th, 2015, 02:27 PM

@lowcel - You have a TV in your trailer, how did you mount it to the wall? I am getting ready to hang mine and I figger you got some experience. I mean, I could always just put it on a shelf but...

lowcel · April 7th, 2015, 02:43 PM

Quote:

Originally Posted by csmith12

@lowcel - You have a TV in your trailer, how did you mount it to the wall? I am getting ready to hang mine and I figger you got some experience. I mean, I could always just put it on a shelf but...

I just used a mount from Monoprice. Nice and simple.

csmith12 · April 7th, 2015, 03:00 PM

Cool, thanks!

lowcel · April 7th, 2015, 03:12 PM

Quote:

Originally Posted by csmith12

Cool, thanks!

Most welcome. Not that it matters but mine is a computer monitor.

csmith12 · April 7th, 2015, 03:21 PM

Quote:

Originally Posted by lowcel

Most welcome. Not that it matters but mine is a computer monitor.

Mine too, hdmi is hdmi.... I wanted to use a computer monitor as well. Since I normally have a lappy with me, I can play movies/track vids and such as needed.

I think you know where I am going with this. I should have my rig a little better set up when I see ya at Mid-o soon.

QuickSiR · April 8th, 2015, 01:53 PM

Just picked this up.

Saddlemen Track-CF seat and Puig Racing windshield.

cuong-nutz · April 8th, 2015, 03:09 PM

Helping a local rider fix his bike and teach him how to rebuild carbs, adjust valves and other things.

crazymadbastard · April 8th, 2015, 04:09 PM

Quote:

Originally Posted by cuong-nutz

Helping a local rider fix his bike and teach him how to rebuild carbs, adjust valves and other things.

Good man right There.

Not today but mounted new tires and ordered up more parts. This thing gotta get done asap!

ieathonda · April 9th, 2015, 09:38 AM

Venhill ss lines and oury grips. Waiting for all of my suspension parts before I get started on overhauling that

Bob2010 · April 10th, 2015, 12:52 PM

Fixed what I broke last year
image.jpg

NevadaWolf · April 11th, 2015, 07:15 PM

A lot

Finally gave her a bath that included a lot of engine degreaser and a thorough scrub to get rid of the bugs, grime, grit, oil, grease, mud, gas, unmentionables. Tired of the CDC complaints about being a biohazard.

Swapped out the phone mount for a new beefier one.

Swapped my 45T to a 42T in prep of the long rides this summer.

Replaced chain after borking the install of the master link on the old chain (yeah, failed to figure out how to remove rear tire without breaking the chain - dur pull the axle idiot.)

Removed adjustable bracket from left foot peg in hopes of making my knee happy again.

Installed the front saddlebags.

She all pretty now!

choneofakind · April 12th, 2015, 07:20 PM

Today I welded Pitbull spool adapters to my swingarm. Then i blasted the whole deal, along with my unitrack, and coated it all with spray on bed liner. Score.

Also revisted my headlight project to get it going. I really want to get this darn bike running. It's finally getting nice out and I'm sick of sitting around tinkering with small parts without seeing it all complete.

Only major thing left is to powder coat my wheels. I haz powder, but many places don't want to use outside powder, even if it's clean and stored properly. Hmmmm.

snapshot · April 12th, 2015, 08:30 PM

Carburetors... And now she runs! I'd never seen a set this dirty, but pine-sol did the trick. There must have been water in them for a while. At least the airbox boots are easier to get back onto the carburetors than they are with a pre-gen.

Ride on,

J~

QuickSiR · April 14th, 2015, 04:27 PM

Black Kawasaki rear cowl: Check
Puig Racing windshield: Check
Saddlemen Track-CF Seat: Check

cadd · April 14th, 2015, 10:30 PM

I practiced balancing on the bike at 0mph today. The best I was able to do was maybe 5-8 seconds. Had to be the perfect intersection with the front tire facing the crown of the road....and preferably a slight incline.

Here I am when I was first practicing this on my bicycle in the early 2000s when I commuted to work by bike. I thought it'll be a cool "trick" to do on a motorbike. If I am able to pull this off for more than 1 minute, I'll mount a rear view cam to get driver's reactions.

On my bicycle, I was able to hold it for more than 5 minutes. I also learned to do it seated, and with only one hand.

https://youtu.be/MjEk1ZSONRo (sorry, couldn't embed vid for some reason).

crazymadbastard · April 15th, 2015, 05:45 AM

Quote:

Originally Posted by snapshot

Carburetors... And now she runs! I'd never seen a set this dirty, but pine-sol did the trick. There must have been water in them for a while. At least the airbox boots are easier to get back onto the carburetors than they are with a pre-gen.

Ride on,

J~

them is the dirtiest sh!tz I've seen. Impressive- looks like barnacles grew on there, holly poop!

snapshot · April 16th, 2015, 08:16 AM

Quote:

Originally Posted by crazymadbastard

them is the dirtiest sh!tz I've seen. Impressive- looks like barnacles grew on there, holly poop!

I was kinda glad that they were the problem. It was an easy fix. Better that than time spent chasing an electrical gremlin!

I added the rear-set, foot-pegs, and shifter yesterday. Got to ride it for the first time, too. Thanks to a piece of sprinkler pipe substituted for the radiator. Picking up the rear fender (with signals) and an Evap canister today. That leaves the radiator, front turn signals, and left side fairing, tires, brake pads, and possibly fork seals. Then some suspension upgrades will be in order. And a custom Skillz Days graphics package.

Thinking that reflective material will be the way to go with that.

Ride on,

J~

cuong-nutz · April 16th, 2015, 05:28 PM

Helped Kashif put his bike back together after a valve adjustment. Bike started up fine and then we shut her off. Started it back up and it wouldn't rev past 2k without bogging. I'm guessing debris got sucked up. we're waiting for the carb rebuild kit to come in and I'll go over the overhaul with him. He attempted it before I came so I figure I trust his work and give it a try to see. He also put together the top end before I came too but I'm pretty confident everything is timed right.

The Red Scourge · April 17th, 2015, 11:25 AM

I installed a new Motion Pro speedo cable. I always forgot how much of a PITA it is to screw the top end into the gauge cluster. No more GPS speedo! Now I just need a front stand and I can change the fork seals and get back on the twisties!

professor gascan · April 18th, 2015, 10:24 AM

I rode it

snot · April 18th, 2015, 12:35 PM

New exhaust....300, rode her home.
I am adding stomp grip...300

Cleaned up the 250

Ghostt · April 18th, 2015, 12:48 PM

Put 200 miles on SERENITY yesterday, going nowhere

NevadaWolf · April 19th, 2015, 01:46 AM

I hit a skunk.... Eewwwwww

Skullz · April 19th, 2015, 03:27 PM

Put 800+ miles on it over the last 3 days, beautiful weather for riding and seen so many motorcycles this early in the year is amazing.

Pulled the sending unit and cleaned it up only to have it not work anymore.

LittleRedNinjette · April 20th, 2015, 04:55 AM

Scrub-a-dub-dub.

All clean!
Also changed out the decals on the sides for Monster decals.

cuong-nutz · April 20th, 2015, 04:06 PM

Quote:

Originally Posted by NevadaWolf

I hit a skunk.... Eewwwwww

I know how you smell...errrr feel. LOL

Quote:

Originally Posted by Skullz

Put 800+ miles on it over the last 3 days, beautiful weather for riding and seen so many motorcycles this early in the year is amazing.

Pulled the sending unit and cleaned it up only to have it not work anymore.

Why no worky?

Local 250 rider got his carb rebuild kit in so I came over and showed him the rebuild somewhat lol. The previous owner boogered some of the screws and the jets but we managed to have everything all cleaned out. Carb looks good. I'm suspecting rain had gotten into the gas tank since when I pulled the carbs off there were signs of water in the bowls. Should have the bike running tommorrow after work when I bring over a fuel jug to dump the fuel in the tank. May have to look around for a pipe since his handle bars are severely bent. Throttle grip was sticking to the bar end which stopped it from snapping back. Makes for a good cruise control though.

snot · April 21st, 2015, 06:19 PM

Put her inline...

crazymadbastard · April 21st, 2015, 07:08 PM

Got her some beer, but I drank it all :/
Gonna have to get her beer again tomorrow.

cuong-nutz · April 21st, 2015, 08:02 PM

local's bike is finally running. Took forever to drain the gas out. I didn't feel like taking the petcock off and making a mess. The bike is missing a lot of hardware due to the abuse/neglect from previous owner. Front fairing stay is bent pretty bad to where the fairings do not line up properly. Suggested he fix his handle bars, tighten down his steering stem nut, and inflate his tires. Other than that, he's back on two again.

NevadaWolf · April 23rd, 2015, 09:59 PM

70k oil change and mocked up some highway pegs. Thanks @DanielObrien42!!

DanielObrien42 · April 24th, 2015, 05:34 AM

Quote:

Originally Posted by NevadaWolf

70k oil change and mocked up some highway pegs. Thanks @DanielObrien42!!

Aw, gee, twernt nuttin.

Ghostt · April 26th, 2015, 08:50 PM

Got to practice my clutchless shifting, clutch cable failure tonight, once again practicing skills comes in handy.

Turism0remix · April 26th, 2015, 10:49 PM

So far I've removed all the fairings and installed EMGO intake pods but still need to get new jets to go with it. Finished mounting my Trail Tech Vapor Gauge (still needs some cable management). Installed headlight brackets to accommodate my cafe style Lucas headlight bucket. Installed a 7" headlight. Now I'm currently trying to adjust my valves while draining my oil...Busy Sunday

Singh2jz · April 27th, 2015, 12:34 AM

dipped my right rearset and swingarm caps..

20150426_141310.jpg

sharky nrk · April 27th, 2015, 06:47 AM

Mounted my HF - Mojo - NoMar contraption purchase from a while back and changed my rear tire from the nearly corded 150 BT16 to the new 140 S20 Evo. Set the bead and going to check it this afternoon when I get home to make sure no pressure loss, then balance.

After I need to decide on pulling the front 16 and putting the 20 on or not. I have the tire but there is probably 35-45% more life in the front left.

NevadaWolf · April 27th, 2015, 06:57 AM

Saturday: pulled the rear wheel and swapped back to a 45t.

Glad I learned the trick to doing that without breaking the chain. This'll make life much easier.

DEFY · April 27th, 2015, 07:00 AM

Friday update, Took my girl out and got her new shoes. Also she had an appointment to check out her health, doctor says she is good for the year. Then I took her home, rode her good and hard. LOL

cuong-nutz · April 27th, 2015, 11:19 AM

Waiting to pull the trigger on stunt cage lol. Got to fix truck :/

Geezer-60 · April 28th, 2015, 03:33 PM

Dag Namit! Found 3 problems today. Oil leak, Left rear turn signal seems to have loose wire and rear brake pedal doesn't switch brake light on. Was fine last week, was just getting into riding but now it's wrench time.

allanoue · April 29th, 2015, 08:38 AM

Ran it 60 miles to work to find the office closed.
Turned around and ran it 60 miles home.

The schools are all open, why close the office?

April 7th, 2015, 02:27 PM	#6561
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	@lowcel - You have a TV in your trailer, how did you mount it to the wall? I am getting ready to hang mine and I figger you got some experience. I mean, I could always just put it on a shelf but... __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

April 7th, 2015, 03:00 PM	#6563
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Cool, thanks! __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

April 8th, 2015, 03:09 PM	#6567
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	Helping a local rider fix his bike and teach him how to rebuild carbs, adjust valves and other things. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days
	1 out of 1 members found this post helpful.

April 9th, 2015, 09:38 AM	#6569
ieathonda ninjette.org member Name: William Location: Houston Join Date: Feb 2015 Motorcycle(s): Ninja EX250F Posts: 110	Venhill ss lines and oury grips. Waiting for all of my suspension parts before I get started on overhauling that
	1 out of 1 members found this post helpful.

April 10th, 2015, 12:52 PM	#6570
Bob2010 ninjette.org sage Name: Bob Location: NY Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730	Fixed what I broke last year image.jpg __________________________________________________ 2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder-

April 8th, 2015, 01:53 PM	#6566
QuickSiR ninjette.org member Name: Maxime Location: Rigaud Join Date: Sep 2013 Motorcycle(s): Honda 599 Posts: 44	Just picked this up. Saddlemen Track-CF seat and Puig Racing windshield.

April 11th, 2015, 07:15 PM	#6571
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	A lot Finally gave her a bath that included a lot of engine degreaser and a thorough scrub to get rid of the bugs, grime, grit, oil, grease, mud, gas, unmentionables. Tired of the CDC complaints about being a biohazard. Swapped out the phone mount for a new beefier one. Swapped my 45T to a 42T in prep of the long rides this summer. Replaced chain after borking the install of the master link on the old chain (yeah, failed to figure out how to remove rear tire without breaking the chain - dur pull the axle idiot.) Removed adjustable bracket from left foot peg in hopes of making my knee happy again. Installed the front saddlebags. She all pretty now! __________________________________________________ <-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow.
	1 out of 1 members found this post helpful.

April 12th, 2015, 07:20 PM	#6572
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	Today I welded Pitbull spool adapters to my swingarm. Then i blasted the whole deal, along with my unitrack, and coated it all with spray on bed liner. Score. Also revisted my headlight project to get it going. I really want to get this darn bike running. It's finally getting nice out and I'm sick of sitting around tinkering with small parts without seeing it all complete. Only major thing left is to powder coat my wheels. I haz powder, but many places don't want to use outside powder, even if it's clean and stored properly. Hmmmm.

April 14th, 2015, 04:27 PM	#6574
QuickSiR ninjette.org member Name: Maxime Location: Rigaud Join Date: Sep 2013 Motorcycle(s): Honda 599 Posts: 44	Black Kawasaki rear cowl: Check Puig Racing windshield: Check Saddlemen Track-CF Seat: Check

April 14th, 2015, 10:30 PM	#6575
cadd cadd cadd cadd Name: Cadd Location: 41°21'13.1"N, 74°41'37.4"W Join Date: Jan 2014 Motorcycle(s): 300 Posts: A lot. MOTM - May '15	I practiced balancing on the bike at 0mph today. The best I was able to do was maybe 5-8 seconds. Had to be the perfect intersection with the front tire facing the crown of the road....and preferably a slight incline. Here I am when I was first practicing this on my bicycle in the early 2000s when I commuted to work by bike. I thought it'll be a cool "trick" to do on a motorbike. If I am able to pull this off for more than 1 minute, I'll mount a rear view cam to get driver's reactions. On my bicycle, I was able to hold it for more than 5 minutes. I also learned to do it seated, and with only one hand. https://youtu.be/MjEk1ZSONRo (sorry, couldn't embed vid for some reason). __________________________________________________ Riding it like I financed it.
	1 out of 1 members found this post helpful.

April 16th, 2015, 05:28 PM	#6578
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	Helped Kashif put his bike back together after a valve adjustment. Bike started up fine and then we shut her off. Started it back up and it wouldn't rev past 2k without bogging. I'm guessing debris got sucked up. we're waiting for the carb rebuild kit to come in and I'll go over the overhaul with him. He attempted it before I came so I figure I trust his work and give it a try to see. He also put together the top end before I came too but I'm pretty confident everything is timed right. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

April 17th, 2015, 11:25 AM	#6579
The Red Scourge ninjette.org member Name: James Location: Asheville, NC Join Date: Oct 2013 Motorcycle(s): '76 Yamaha RD400, '71 Kawasaki G3SS, '88 Honda CBR400RR, '90 Yamaha FZR400/600 hybrid Posts: 138	I installed a new Motion Pro speedo cable. I always forgot how much of a PITA it is to screw the top end into the gauge cluster. No more GPS speedo! Now I just need a front stand and I can change the fork seals and get back on the twisties! __________________________________________________ "When in doubt, gas it!"

April 18th, 2015, 10:24 AM	#6580
professor gascan ninjette.org member Name: adam Location: rhode island Join Date: Feb 2011 Motorcycle(s): '10 Red Ninja 250r Posts: 45	I rode it __________________________________________________ Jah Guide

April 18th, 2015, 12:35 PM	#6581
snot sammich maker Name: snot Location: West Ohio - in the kitchen Join Date: Feb 2012 Motorcycle(s): 2013 white 300, 09 KLX 250 SF, 09 thunder blue 250(traded) Posts: A lot. MOTM - Apr '15	New exhaust....300, rode her home. I am adding stomp grip...300 Cleaned up the 250 __________________________________________________ https://www.brocksperformance.com/VZ...0035+C450.aspx

April 18th, 2015, 12:48 PM	#6582
Ghostt in your machine Name: Scott Location: Summer Shade, Ky. Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot. Blog Entries: 25 MOTM - Jun '17, May '16, Mar '15	Put 200 miles on SERENITY yesterday, going nowhere __________________________________________________ *violente et ignorantia* ZX-2R BLOG *Twitter and Instagram = Ghostt_Scott* *I'm not here to change your mind, just to inform.*

April 19th, 2015, 01:46 AM	#6583
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	I hit a skunk.... Eewwwwww __________________________________________________ <-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow.

April 19th, 2015, 03:27 PM	#6584
Skullz ninjette.org guru Name: Ray Location: 48162 Join Date: Aug 2013 Motorcycle(s): 2012 Ninja 250 Posts: 451	Put 800+ miles on it over the last 3 days, beautiful weather for riding and seen so many motorcycles this early in the year is amazing. Pulled the sending unit and cleaned it up only to have it not work anymore.

April 20th, 2015, 04:55 AM	#6585
LittleRedNinjette Certified Troublemaker Name: Teri Location: Hamilton, NJ Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot. MOTM - Aug '13, Aug '14, Feb '17	Scrub-a-dub-dub. All clean! Also changed out the decals on the sides for Monster decals. __________________________________________________ Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better...
	1 out of 1 members found this post helpful.

April 21st, 2015, 07:08 PM	#6588
crazymadbastard I'm crazy,your excuse is? Name: Winston Location: Connecticut Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.	Got her some beer, but I drank it all :/ Gonna have to get her beer again tomorrow. __________________________________________________ My Cafe Racer Build My intro post

April 21st, 2015, 08:02 PM	#6589
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	local's bike is finally running. Took forever to drain the gas out. I didn't feel like taking the petcock off and making a mess. The bike is missing a lot of hardware due to the abuse/neglect from previous owner. Front fairing stay is bent pretty bad to where the fairings do not line up properly. Suggested he fix his handle bars, tighten down his steering stem nut, and inflate his tires. Other than that, he's back on two again. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

April 26th, 2015, 08:50 PM	#6592
Ghostt in your machine Name: Scott Location: Summer Shade, Ky. Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot. Blog Entries: 25 MOTM - Jun '17, May '16, Mar '15	Got to practice my clutchless shifting, clutch cable failure tonight, once again practicing skills comes in handy. __________________________________________________ *violente et ignorantia* ZX-2R BLOG *Twitter and Instagram = Ghostt_Scott* *I'm not here to change your mind, just to inform.*

April 26th, 2015, 10:49 PM	#6593
Turism0remix That 1 Guy Name: John Location: Corona, CA Join Date: Apr 2015 Motorcycle(s): 05' Ninja EX250 Posts: 20	So far I've removed all the fairings and installed EMGO intake pods but still need to get new jets to go with it. Finished mounting my Trail Tech Vapor Gauge (still needs some cable management). Installed headlight brackets to accommodate my cafe style Lucas headlight bucket. Installed a 7" headlight. Now I'm currently trying to adjust my valves while draining my oil...Busy Sunday __________________________________________________ http://www.twitch.tv/turism0remix http://osu.ppy.sh/u/800641

April 27th, 2015, 12:34 AM	#6594
Singh2jz ninjette.org certified postwhore Name: Inderveer Location: San Jose Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.	dipped my right rearset and swingarm caps.. 20150426_141310.jpg __________________________________________________ The Bike \| The Truck

April 27th, 2015, 06:47 AM	#6595
sharky nrk Fighting Texas Aggie '05 Name: Neil Location: Hutto, TX Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.	Mounted my HF - Mojo - NoMar contraption purchase from a while back and changed my rear tire from the nearly corded 150 BT16 to the new 140 S20 Evo. Set the bead and going to check it this afternoon when I get home to make sure no pressure loss, then balance. After I need to decide on pulling the front 16 and putting the 20 on or not. I have the tire but there is probably 35-45% more life in the front left. __________________________________________________ Keep it rubber side down and enjoy the ride Get healthy - Get Fit - Change Your Life Click Here Or PM Me To Find More - Advocare

April 27th, 2015, 06:57 AM	#6596
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	Saturday: pulled the rear wheel and swapped back to a 45t. Glad I learned the trick to doing that without breaking the chain. This'll make life much easier. __________________________________________________ <-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow.

April 27th, 2015, 07:00 AM	#6597
DEFY ᗧ•••ᗣ•ᗣᗣ•••ᗣ Name: Nick Location: NY Join Date: Nov 2013 Motorcycle(s): 2009 Ninja 250R and 2014 Triumph 675R Posts: A lot.	Friday update, Took my girl out and got her new shoes. Also she had an appointment to check out her health, doctor says she is good for the year. Then I took her home, rode her good and hard. LOL __________________________________________________ Spoiler for topic: It might just be the [you] tag

April 27th, 2015, 11:19 AM	#6598
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	Waiting to pull the trigger on stunt cage lol. Got to fix truck :/ __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

April 28th, 2015, 03:33 PM	#6599
Geezer-60 ninjette.org member Name: A.P. Location: Butler County, PA Join Date: Oct 2014 Motorcycle(s): 2007 BMW F800s, Former 2011 Ninja 250r Posts: 117	Dag Namit! Found 3 problems today. Oil leak, Left rear turn signal seems to have loose wire and rear brake pedal doesn't switch brake light on. Was fine last week, was just getting into riding but now it's wrench time. __________________________________________________ Inertia shouldn't define potential.

April 29th, 2015, 08:38 AM	#6600
allanoue ninjette.org certified postwhore Name: Al Location: York, Pa Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much. MOTM - Sep '14	Ran it 60 miles to work to find the office closed. Turned around and ran it 60 miles home. The schools are all open, why close the office? __________________________________________________ Keep calm and ride on -Motofool Never quit on a rainy day -ally99

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discovered something scary about my Ninjette today...	kjohng	General Motorcycling Discussion	28	October 15th, 2021 01:40 PM
Sold the 2006 Ninjette today :(	Renner	General Motorcycling Discussion	31	October 16th, 2014 11:46 PM
Today I Gave My Ninjette Wings!	BlueHairSar	Pictures	5	June 20th, 2013 07:38 AM
my bro went down today on his ninjette	richierich781	!%@*#$%!)@#&!%@ I crashed!	46	January 18th, 2013 11:59 AM
Ninjette. org hacked today	CC Cowboy	Off-Topic	9	April 3rd, 2011 08:55 AM