ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Farkles

Notices

Reply
 
Thread Tools
Old July 29th, 2013, 07:52 PM   #1
Old Lemon
Lays er down
 
Old Lemon's Avatar
 
Name: Michael
Location: Maryland
Join Date: Apr 2012

Motorcycle(s): 2008 Lime green Ninja 250R

Posts: A lot.
fairing grommets

I kept my plastics i had from my crash last year to use for when ever i end up going to the track, well i may be going in a couple weeks but would like to get a new set of rubber grommets because they were horrible to get out and installed in the new ones.

Im talking about the grommets that hold the side cover on each side of the bike in place. It uses 3 grommets and i believe there are also 2 more on the rear plastics, one each but they are different from the previously mentioned ones.

Any technical name or part number would be great

Last futzed with by Old Lemon; July 30th, 2013 at 12:18 AM.
Old Lemon is offline   Reply With Quote




Old July 29th, 2013, 09:31 PM   #2
NevadaWolf
Certified looney toon
 
NevadaWolf's Avatar
 
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012

Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles

Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
Um, fuzzy on which part. Is it something off this?

http://www.bikebandit.com/houseofmot...48915sch550362
__________________________________________________
<-- Linky
Hey Unregistered! The code [you] shows the username currently logged in.
IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear
Hold yourself to the same rules you expect others to follow.
NevadaWolf is offline   Reply With Quote


Old July 29th, 2013, 11:57 PM   #3
Old Lemon
Lays er down
 
Old Lemon's Avatar
 
Name: Michael
Location: Maryland
Join Date: Apr 2012

Motorcycle(s): 2008 Lime green Ninja 250R

Posts: A lot.
these
Attached Images
File Type: jpg 1375167217657.jpg (14.5 KB, 15 views)
File Type: jpg 1375167230525.jpg (10.5 KB, 9 views)
Old Lemon is offline   Reply With Quote


Old July 29th, 2013, 11:59 PM   #4
Trailerboy531
Gear crash test dummy
 
Trailerboy531's Avatar
 
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011

Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r

Posts: A lot.
Ah. Confusing because those hold the "side panel" which is not at all a battery cover.

They're just...grommets. should be an easy find.
__________________________________________________
CVMA #531
Trailerboy531 is offline   Reply With Quote


Old July 30th, 2013, 12:14 AM   #5
Old Lemon
Lays er down
 
Old Lemon's Avatar
 
Name: Michael
Location: Maryland
Join Date: Apr 2012

Motorcycle(s): 2008 Lime green Ninja 250R

Posts: A lot.
fixt original post, ty for pointing that out.

The grommets on the rear plastics look different than these. Like one side is large like those and the other side is very small. Cant get the plastics off now cause sleep need

I dont know much of anything when it comes to measuring but i found these

http://www.lowes.com/Search=rubber+g...ubber+grommet#!

dont know which size our bikes take
Old Lemon is offline   Reply With Quote


Old July 30th, 2013, 07:25 AM   #6
NevadaWolf
Certified looney toon
 
NevadaWolf's Avatar
 
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012

Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles

Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
Ah, BikeBandit calls those Dampers.
http://www.bikebandit.com/houseofmot...48915sch550366
__________________________________________________
<-- Linky
Hey Unregistered! The code [you] shows the username currently logged in.
IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear
Hold yourself to the same rules you expect others to follow.
NevadaWolf is offline   Reply With Quote


Old July 30th, 2013, 11:39 AM   #7
Old Lemon
Lays er down
 
Old Lemon's Avatar
 
Name: Michael
Location: Maryland
Join Date: Apr 2012

Motorcycle(s): 2008 Lime green Ninja 250R

Posts: A lot.
Quote:
Originally Posted by NevadaWolf View Post
Ah, BikeBandit calls those Dampers.
http://www.bikebandit.com/houseofmot...48915sch550366
awesome thank you
Old Lemon is offline   Reply With Quote


Old July 30th, 2013, 11:51 AM   #8
Chicagobob
ninjette.org guru
 
Chicagobob's Avatar
 
Name: Bob
Location: Chicago
Join Date: Sep 2012

Motorcycle(s): '06 Ninja 250, 2018 Honda GL1800B

Posts: 315
You could use similarly-sized hardware store grommets, which worked well for me on my old Suzuki GS. I've also seen duct tape used in a pinch (wrap some around the hole and punch a small hole in the middle, then shove the side panel pin through it).
Chicagobob is offline   Reply With Quote


Old August 2nd, 2013, 08:57 PM   #9
Old Lemon
Lays er down
 
Old Lemon's Avatar
 
Name: Michael
Location: Maryland
Join Date: Apr 2012

Motorcycle(s): 2008 Lime green Ninja 250R

Posts: A lot.
thats a pretty neat idea
Old Lemon is offline   Reply With Quote


Old August 2nd, 2013, 10:02 PM   #10
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
Make that 1001 uses for duct tape? Hey Bob, you ever live in KY? lol
csmith12 is offline   Reply With Quote


Old August 2nd, 2013, 10:39 PM   #11
slickt0mmy
ninjette.org member
 
Name: Adam
Location: Ohio
Join Date: Jul 2012

Motorcycle(s): 2004 Ninja 250

Posts: 178
I needed a new one of those too. Somehow I lost one in the process of adjusting my valves. But anyway, I found them at Lowes. It may not be the exact part from Kawasaki but it certainly gets the job done. Just take an old one in and use it to compare to the new ones.
slickt0mmy is offline   Reply With Quote


Old August 9th, 2013, 04:50 PM   #12
Shify671
ninjette.org newbie
 
Name: Ryan
Location: 134 J.L. Blas ST
Join Date: Apr 2013

Motorcycle(s): 09 250R Ninja

Posts: 6
I lost one of those as well. Just ended up using some fuel hose worked like a charm. ^^
Shify671 is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Pre gen fairing . Wind screen . Tail fairing . Orange Klondike1020 Motorcycle-related 0 March 1st, 2013 09:51 PM
WTB: Pre-Gen Upper Fairing & R midside fairing Modzilla Items Wanted 1 January 19th, 2013 11:36 PM
WTB New Gen Fairing Grommets pjed Items Wanted 3 March 19th, 2012 06:44 AM
putting the black side fairings back on the rubber grommets stryder 2008 - 2012 Ninja 250R Tech Talk 6 April 18th, 2010 09:00 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 06:06 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.