ninjette.org

Go Back   ninjette.org > General > Motorcycling News

Reply
 
Thread Tools
Old November 11th, 2015, 04:20 PM   #1
Ninjette Newsbot
All the news that's fit to excerpt
 
Ninjette Newsbot's Avatar
 
Name: newsie
Location: who knows?
Join Date: Jun 2008

Motorcycle(s): only digital replicas

Posts: Too much.
[motorcycle.com] - MO Tested: Dainese Bonneville Jeans


A week or two ago I sang the praises of one of my favorite jackets, this Dainese Street Rider. Today, it’s time to confess my love for the jeans that complete the ensemble. I’ve had these Bonneville jeans for six months now, and they’ve become not just my favorite motorcycle riding jeans but my favorite jeans period. For me, I guess that’s almost the same thing; thanks to the hot summer we’ve been having that’s only now segueing into a hot winter. I only put on pants when I’m going somewhere on a motorcycle. (The rest of the time it’s the Spongebob boxers or the Speedo.)

For me when it comes to jeans, it’s largely about the fit, and the Italians do it right (some Italians better than others). The Bonnevilles come in Regular and Slim; I got the regulars in size 32-inch waist (there are 17 sizes in 1-inch increments from 28 to 44 for Men), and they fit great right out of the box. They are a little long, but then I’m a little short.

Actually, I take it back, they’re not a little long; on the bike my 32s are just right for my 30-inch inseam. (Photo: Evans Brasfield)


There’s not as much room in here as in a pair of 501s, my $13 Kirklands, or in some other motorcycle jeans I own, but on a bike that’s a good thing. Less flappage is always desirable, and more importantly a snuggish fit greatly increases the chances that the padding will stay in place in the event of a shunt, heaven forbid. Don’t be thinking you’re going to get these legs over the tops of boots with any kind of armor or padding, though, unless you’ve got actual bird legs.

Dupont Kevlar Aramid fabric backstops your butt and knees, but that’s about it. That big crotch panel gives great freedom of movement.


The downside of these is there really isn’t much padding or protection. There’s a thinnish 8- x 5-inch knee pad that Velcroes inside a pocket atop each knee and is better than nothing, but maybe not much better. There’s also a layer of Dupont Kevlar Aramid fabric inside the seat that extends down to the bottoms of the hip pockets and wraps around the hips; it wouldn’t be a bad thing if that tear-, wear-, shear- and heat-resistant fabric kept on going a bit farther down toward the knee to meet up with the section of it that also lines the knees; instead, there’s nought but a single layer of denim in just the place you’re most likely to slide on your outer thigh. It’s thickish denim and nicely top-stitched, but for $229 it seems like a bit more wonder-fabric right there might’ve been in order.

Velcro inside the knee pockets lets you adjust the thin CE rubber pads up and down an inch or so, and there’s Aramid fabric fronting your knees also. A little padding is way better than none, and the upside is you barely know the kneepads are there. They’re excellent when you’re down on your knees trying to find the socket that rolled under the car or helping celebrate a friend’s victory in Spain.


Obviously, motorcycle jeans are a compromise between convenience, fashion and safety, to be worn when you’re not going for the lap record. Off the bike, these are super-comfortable and were soft right out of the box, even moreso now that they’ve been washed a time or two (our jeans mogul friend Jerome says don’t wash expensive jeans; put them in the freezer now and then). There’s not a lot of protection, but that means you’d almost never know these are motorcycle jeans from wearing them. I do like the snuggish fit, but not too snug; at my age and beer consumption level, the butt tends to move around to the stomach area like the eyes on a halibut. These pantalones carress what’s left of my buns gently while still leaving a little spare room for large MO expense-account meals in the waistband around front. Yet they don’t fall off without a belt.

Again, I apologize for having become such a snob when it comes to motorcycle clothing but it really is my job to seek out the finest, so … the tag says these are not just from Italy but also made there. I love that place, especially from afar. Two legs up.

Dainese Bonneville jeans
$229.95
Waist sizes 28 to 44 inches (in 1-in. increments)
Dainese.com

MO Tested: Dainese Bonneville Jeans appeared first on Motorcycle.com.



Click here for full story...
__________________________________________________
I'm a bot. I don't need no stinkin' signature...
Ninjette Newsbot is offline   Reply With Quote




Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
[motorcycle.com] - MO Tested: Dainese Street Rider Jacket Review Ninjette Newsbot Motorcycling News 0 October 23rd, 2015 02:40 PM
[motorcycle.com] - MO Tested: Bull-It Jeans Review Ninjette Newsbot Motorcycling News 0 October 6th, 2015 01:11 PM
[motorcycle.com] - Dainese Presents 2015 Jeans Collection Ninjette Newsbot Motorcycling News 0 February 4th, 2015 12:40 PM
[motorcycle.com] - Dainese D6 Denim Riding Jeans Review Ninjette Newsbot Motorcycling News 0 May 16th, 2014 02:50 PM
[webbikeworld.com] - Dainese D1 Kevlar Jeans Review Ninjette Newsbot Motorcycling News 0 June 21st, 2012 11:40 AM



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 08:20 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.