December 13th, 2010, 12:54 AM | #1 |
ninjette.org newbie
Name: S
Location: Usa
Join Date: Sep 2010 Motorcycle(s): 07 ninja 250 Posts: 3
|
08-10 after market exhaust on pre gen
i know a stock 08-10 exhaust wont fit but would an aftermarket one fit, it kinda sucks being limited only to muzzy which is really hard to find used in good condition.
|
|
December 13th, 2010, 02:21 AM | #2 |
Join Date: Nov 2008 Posts: Too much.
|
area P makes an exhaust for the pregens. AFAIK, the newgen exhausts, even if they fit (which I don't believe they will) are tuned different from what the pregens require, so even if they did fit, the bike may not run as well as it should as it would with an exhaust that is specifically designed for it.
|
|
December 13th, 2010, 05:46 AM | #3 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
I think someone here has/had some yoshi cans on an 07.
|
|
December 15th, 2010, 05:11 PM | #4 |
ninjette.org member
Name: AL
Location: west new york
Join Date: Nov 2010 Motorcycle(s): ex250r, vulcan 800b, k1200r Posts: 40
|
Aftermarket Exhaust.
I have 2 bros. M6 dual slip-ons on my ride. Not so loud but I wear earplugs any way. There's a U-Tube video/audio so listen to the low pitch rumble of the twin pipes.
Meng |
|
December 18th, 2010, 09:06 AM | #5 |
Livin' the Minimoto Life
Name: Mark
Location: Riding around in TX
Join Date: Mar 2009 Motorcycle(s): 2022 Honda Navi, 2018 Z-125 Pro Posts: A lot.
|
I have the Yoshi RS3 system on my 07. It is the pregen setup though..
__________________________________________________
--- My IG Page --- My FB page! --- 2022 Honda Navi && 2018 Z-125 Pro |
|
December 24th, 2010, 12:24 AM | #6 |
ninjette.org newbie
Name: S
Location: Usa
Join Date: Sep 2010 Motorcycle(s): 07 ninja 250 Posts: 3
|
i found a full 2-1 yoshi exhaust, i cant find any videos online. does it sound like the muzzy, i would imagine so because they do look similar
|
|
December 24th, 2010, 03:49 PM | #7 | |
-
Name: -
Location: -
Join Date: May 2009 Motorcycle(s): - Posts: A lot.
|
The following is a public service announcement....
(It's a post I made on an older thread. It was a response to the belief that there's any real difference in the sound between any of the aftermarket 2-into-1 exhaust systems: Two Brothers, Yoshi, Muzzy, Area P, etc.....) Quote:
|
|
|
January 6th, 2011, 04:50 PM | #8 |
ninjette.org member
Name: Joe
Location: Boston
Join Date: Mar 2010 Motorcycle(s): 1989 Honda NT650 Hawk GT Posts: 37
|
I have a full pregen 1994 yoshi exhaust with the can in great condition that I want to sell. I don't think it sounds like a muzzy, but I can tell you it screams especially at higher rpms. When you get to 6k and above it gets loud then around 9 its crazy.. Too much for me so I bought a stock exhaust and put that on and I like it. the stock is nice and quiet which is fine with me.
__________________________________________________
goin retro baby 1989! Last futzed with by Terrorizer; January 6th, 2011 at 04:52 PM. Reason: want to add pic |
|
January 10th, 2011, 10:33 AM | #9 |
Smoker
Name: Bob
Location: SoCal
Join Date: Dec 2010 Motorcycle(s): Guess.... Posts: 556
|
No, the new gen exhaust won't fit without serious mods.
For aftermarket, they are all loud, with the Yosh 2:1 being the least loud and best sounding. But the one I am familiar with was bigger than the one posted FS earlier in this thread. |
|
January 22nd, 2011, 09:34 AM | #10 |
ninjette.org sage
Name: john
Location: Palm Beach County, Fl Sligo County, Eire
Join Date: Dec 2010 Motorcycle(s): 2005 ninja 250 street fighter, 2008 street fighter ninja 500, 2001 nsr 125 Posts: 812
|
I wasn't aware of any 2 into 1's but 2 bros and yoshi do make 2 into 2 slip-ons and full exhausts for the original ninja 250. There another company putting out "universal" cans now and they have some that fit the bike as well. Can't remember the name, but they were nice oval or round large but really short cans. Also there are plenty of used cobras recommended by no one and muzzys out there, have to look around and be patient for good set. Heh? what was that one? not the muzzy, huh, i **** hear you anymore, i have an in****tion in my ear (cobra), let me finger it out and bareask me again. **** ok, you can spell it out for me, heh?
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New-gen engine in Pre-gen frame. Oil leak under exhaust ports. | AFazakerley | 2008 - 2012 Ninja 250R Tech Talk | 11 | June 5th, 2016 02:03 PM |
WTB Suspension after market rear shock/exhaust Pre-Gen Ninja 250ex | WesleySnipes | Items Wanted | 17 | March 5th, 2013 08:27 AM |
After Market Exhaust for a Pre-Gen | dburgess1231 | Items Wanted | 11 | March 23rd, 2012 10:48 AM |
pre-gen aftermarket exhaust | mapolley07 | Items Wanted | 7 | December 12th, 2011 04:25 PM |
Does the new-gen use same exhaust valves as the pre gen? | LoneRonin | 2008 - 2012 Ninja 250R Tech Talk | 2 | July 27th, 2011 09:29 AM |
|
|