May 3rd, 2011, 06:02 AM | #1 |
Bad-ass 250 racer
Name: Neal
Location: Minnesnowta
Join Date: Nov 2010 Motorcycle(s): Ninja 250r, ATK 605, Honda CR250R Posts: 91
|
CDI wiring help
Hi all, I'm putting a 2007 CDI into my 2008. Does anyone have or can anyone get me a picture of the wires going into the CDI plugs? I've read the DIY on doing this but those are using the 94 style CDI which has different wiring. The schematic for the bike shows wire colors but not what pins they go to.
Heeeeelp. Thanks!
__________________________________________________
CRA #28. Just wave as you go by! |
|
May 3rd, 2011, 06:08 AM | #2 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
Short answer is there isint one. When I did the 88-94 swap I ran into this problem. The diagrams show the wires going to the plugs but no pin locations. I ended up tracing a wiring harnes I bought on E bay. I needed the plugs anyway. I think the wire colors match . But not the pin locations.
|
|
May 3rd, 2011, 11:19 AM | #3 |
Bad-ass 250 racer
Name: Neal
Location: Minnesnowta
Join Date: Nov 2010 Motorcycle(s): Ninja 250r, ATK 605, Honda CR250R Posts: 91
|
Yeah, that's why I was hoping somone could post a picture of thier plugs or give me the wire colors and pin positions.
I got new plugs from Eastern Beaver, so it'll be a plug and play affair.
__________________________________________________
CRA #28. Just wave as you go by! |
|
May 5th, 2011, 04:21 AM | #4 | |
ninjette.org certified postwhore
Name: Sam
Location: Northern Virginia
Join Date: Nov 2008 Motorcycle(s): Ninja 250R 2009 Posts: A lot.
|
Quote:
|
|
|
May 5th, 2011, 04:27 AM | #5 |
Bad-ass 250 racer
Name: Neal
Location: Minnesnowta
Join Date: Nov 2010 Motorcycle(s): Ninja 250r, ATK 605, Honda CR250R Posts: 91
|
Hi Sam, I need to know where they go on the 2007 CDI.
__________________________________________________
CRA #28. Just wave as you go by! |
|
May 5th, 2011, 08:39 AM | #7 |
Bad-ass 250 racer
Name: Neal
Location: Minnesnowta
Join Date: Nov 2010 Motorcycle(s): Ninja 250r, ATK 605, Honda CR250R Posts: 91
|
Eric - MUCH Obliged!
It's my first race weekend of the year and if I could install this that'd be great, but if not, I'll just have to learn to ride.
__________________________________________________
CRA #28. Just wave as you go by! |
|
May 8th, 2011, 07:01 PM | #9 |
Bad-ass 250 racer
Name: Neal
Location: Minnesnowta
Join Date: Nov 2010 Motorcycle(s): Ninja 250r, ATK 605, Honda CR250R Posts: 91
|
No worries, I appreciate the help!
Ran this weekend with the stock CDI and noticed my tach is now flaking out. Reason #2 to do this mod.
__________________________________________________
CRA #28. Just wave as you go by! |
|
January 26th, 2014, 01:14 PM | #10 |
ninjette.org member
Name: Luca
Location: Westchester ny
Join Date: Nov 2012 Motorcycle(s): Ninja 250 Posts: 26
|
hello everyone have you ever found the right wires that go from the 08 250r harness in to the 07 cdi pins? it would be possible to fit a 07 cdi in to a 08 250r? , and what are the differences between the two cdi's from 88-94 and 95-2007 cdi's?
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need help with 88-94 CDI wiring | KrazyWalle | 2008 - 2012 Ninja 250R Tech Talk | 7 | March 3rd, 2014 12:44 PM |
88-94 cdi swap in 08-12 new gen wiring help | Lucagst | 2008 - 2012 Ninja 250R Tech Talk | 4 | February 24th, 2014 06:02 PM |
CDI Pinout/Schematic/Wiring | indr | 2008 - 2012 Ninja 250R Tech Talk | 2 | January 28th, 2013 09:56 AM |
wiring harness and pregen cdi | thomason2wheels | 2008 - 2012 Ninja 250R Tech Talk | 10 | November 13th, 2012 08:50 AM |
CDI wiring question | PeeFo | 1986 - 2007 Ninja 250R Tech Talk | 8 | January 10th, 2012 10:45 PM |
|
|