Clutch lever bracket

MikeCL · January 7th, 2023, 07:14 PM

Hey just wondering I have an '04 ex250 and I was wondering if the bracket for the clutch would fit on the '04 model?

Bob KellyIII · January 22nd, 2023, 07:59 PM

unknown.... but it should... most clutch lever brackets are 7/8" and if your is too it should fit... weather it will clear everything else is the big question though.... not the fit on the handle bar !
give it a try what can it hurt ?
....
to get the handle bar grip off shove a long thin screw driver under the outside edge of the grip all the way to the control housing and squirt WD-40 in there and do that 2 or 3 times... around the rubber grip and then you can twist off the grip....
you can get the WD-40 off with Rubbing alcohol and a rag later.
or you may be able to just split the controls... i dunno.
....
Bob.....

MikeCL · January 23rd, 2023, 07:53 PM

Oh yeah I forgot an update yeah it fits no issues even the plug fits.. and my clutch lever fits just fine..

I may change the brake side because a tiny play is enough to turn on my brake like without the brakes being on.

January 7th, 2023, 07:14 PM	#1
MikeCL ninjette.org member Name: Mike Location: Connecticut Join Date: Nov 2022 Motorcycle(s): ‘04 EX250 Posts: 157	Clutch lever bracket Hey just wondering I have an '04 ex250 and I was wondering if the bracket for the clutch would fit on the '04 model?

January 22nd, 2023, 07:59 PM	#2
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	unknown.... but it should... most clutch lever brackets are 7/8" and if your is too it should fit... weather it will clear everything else is the big question though.... not the fit on the handle bar ! give it a try what can it hurt ? .... to get the handle bar grip off shove a long thin screw driver under the outside edge of the grip all the way to the control housing and squirt WD-40 in there and do that 2 or 3 times... around the rubber grip and then you can twist off the grip.... you can get the WD-40 off with Rubbing alcohol and a rag later. or you may be able to just split the controls... i dunno. .... Bob..... __________________________________________________ Its too late when you've gone too far !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front brake = left lever; Clutch = right lever	cadd	Riding Skills	27	October 7th, 2014 08:29 AM
WTB: Clutch lever, handle bar end, dummy cap, and clutch lever holder. 09 250r	SwagenGTI	Items Wanted	5	March 4th, 2013 12:20 PM
WTB: Left side turn signal/clutch lever/ shift lever/fairing (green/red or black)	daedrick	Items Wanted	0	April 3rd, 2012 12:44 PM
Ebay lever broke my clutch lever mounting bolt!	pilotgeorge747	2008 - 2012 Ninja 250R Tech Talk	8	December 22nd, 2011 07:22 AM

January 23rd, 2023, 07:53 PM	#3
MikeCL ninjette.org member Name: Mike Location: Connecticut Join Date: Nov 2022 Motorcycle(s): ‘04 EX250 Posts: 157	Oh yeah I forgot an update yeah it fits no issues even the plug fits.. and my clutch lever fits just fine.. I may change the brake side because a tiny play is enough to turn on my brake like without the brakes being on.