How to know you need your valves adjusted? - Page 2

ForceofWill · July 26th, 2014, 09:20 AM

Quote:

Originally Posted by Hero Danny

I increased the rear tire pressure to 32 and tried it again, no difference.

Also I checked the chain slack and measured it (not sure how well I did though, since it was very difficult) And it measured 4mm

4mm or 40mm. If it was 4mm we got a problem lol.

Hero Danny · July 26th, 2014, 05:54 PM

Quote:

Originally Posted by ForceofWill

4mm or 40mm. If it was 4mm we got a problem lol.

40, lmao

Bigballsofpaint · July 26th, 2014, 06:39 PM

40mm your a bit over the limit. prob half a turn in on the adjusters will get you within spec (although you should check regardless and not take my word for it)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
just adjusted Valves. ...	Fakker	1986 - 2007 Ninja 250R Tech Talk	7	July 2nd, 2014 10:28 AM
Just adjusted valves for the first time!	slickt0mmy	1986 - 2007 Ninja 250R Tech Talk	13	June 10th, 2013 08:34 PM
[roadracingworld.com] - MV Agusta's 2013-Model F4 Gets Electronically-Adjusted Ohlins	Ninjette Newsbot	Motorcycling News	0	November 10th, 2012 07:50 AM
Carb tuning take 2 - AEM wideband info & has ANYONE adjusted float height?	rwheelz	2008 - 2012 Ninja 250R Tech Talk	6	March 30th, 2011 06:43 AM
[roadracingworld.com] - More On British Superbike's Adjusted Weight Limit For 1200cc	Ninjette Newsbot	Motorcycling News	0	June 12th, 2008 01:06 PM

July 26th, 2014, 06:39 PM	#43
Bigballsofpaint ninjette.org certified postwhore Name: Jay Location: CT Join Date: Apr 2011 Motorcycle(s): 2015 636 ABS - 69 Honda 305 Posts: A lot.	40mm your a bit over the limit. prob half a turn in on the adjusters will get you within spec (although you should check regardless and not take my word for it)