2004 ninja 250, complete part-out - Page 2

DCkilla · June 28th, 2014, 08:13 PM

Are the front forks available?

thedrewski86 · June 30th, 2014, 05:19 AM

Quote:

Originally Posted by DCkilla

Are the front forks available?

They are, they're good and straight too. I'll try to get you a price w/ shipping this week.

Daks · July 20th, 2014, 01:46 AM

How do the rotors look?

hamburglar · July 20th, 2014, 08:24 PM

I'm in need a few parts for my '04.

-clutch lever
-left bar end
-shift lever
-center stand
-front / left turn signal
-front axle / nut

Please let me know if you have any of these and send me a price / shipping for them.

flitecontrol · July 25th, 2014, 12:27 AM

What about the four bolts that hold the fairings onto the tank? Are they in good shape (not boogered)? If yes, how much shipped to 71201?

thedrewski86 · July 25th, 2014, 05:38 AM

Sorry for not getting back to people in a while, I will try to get to this over the weekend. I'm hoping to get pics of most of the parts uploaded to this thread soon with prices.

Z1R rider · July 25th, 2014, 08:22 AM

I'm needing a windshield and the nuts and bolts that hold it, do you still have these?

Z1R rider · July 28th, 2014, 07:29 PM

Quote:

Originally Posted by Z1R rider

I'm needing a windshield and the nuts and bolts that hold it, do you still have these?

Granddaughter took it for a ride this evening, now I need the right foot peg bracket also. (the alum. one that the master cyl. and foot peg mount to)

sunnyboy · August 8th, 2014, 10:02 AM

Do you have the right front turn signal bracket (the base piec flush against the fairing) part #23051A?

Do you the Radiator cover (the inner front fairing piece) part #14024H?

MrAtom · August 18th, 2014, 11:24 PM

Sorry to bump up an old post, but if you've got the upper fairing (I don't need the windshield) how much would you charge for it?

thedrewski86 · August 19th, 2014, 07:49 PM

Quote:

Originally Posted by MrAtom

Sorry to bump up an old post, but if you've got the upper fairing (I don't need the windshield) how much would you charge for it?

Lot's of folk have asked for that and I hope you've noted the pics link in the first post. The upper fairing is pretty chewed up. It is functional though, take a look and let me know if you're still interested.

NAFREEK · August 19th, 2014, 08:52 PM

How much for the rims and tires? Are they in good shape? my zip is 68522. Thank you

Z1R rider · August 23rd, 2014, 07:56 AM

Quote:

Originally Posted by Z1R rider

I'm needing a windshield and the nuts and bolts that hold it, do you still have these?

Quote:

Originally Posted by Z1R rider

Granddaughter took it for a ride this evening, now I need the right foot peg bracket also. (the alum. one that the master cyl. and foot peg mount to)

got the parts

, thanks Drew

Roark · August 29th, 2014, 07:38 AM

It's not pictured.. But figured I'd ask anyways..

Do you have the rear fender? Specifically anything resembling rear blinkers and the license plate bracket.

FvnnyL3tt3r1ng · January 19th, 2015, 10:00 AM

Not sure if you sold the gas tank? Engine?

thedrewski86 · January 19th, 2015, 07:45 PM

Quote:

Originally Posted by FvnnyL3tt3r1ng

Not sure if you sold the gas tank? Engine?

Both are still available! I'll shoot you a PM

daisha · January 31st, 2015, 06:17 PM

Did anyone end up picking up the forks?

thedrewski86 · February 3rd, 2015, 05:04 PM

Quote:

Originally Posted by daisha

Did anyone end up picking up the forks?

Yes, forks are gone. Were you still interested in the gauges? Those are still around.

propilot · February 21st, 2015, 09:09 PM

Did eulark buy that starter motor or is it still available?

ieathonda · February 26th, 2015, 12:59 PM

could you pm me a price for the front fairing to 77459 please?

thedrewski86 · April 12th, 2015, 07:45 PM

Hey so the Ninjette is done being parted out. Since the frame and engine still remain it is getting the cheap super-moto treatment! No title of course so this will be a dirt-only bike but it should be a blast. Here it is:

MrAtom · April 12th, 2015, 10:46 PM

Dude thats sick! Youre gonna have to set the gearing super short though. These bikes have like no torque. Should still be a blast, though! Keep us posted!

N-m · April 13th, 2015, 05:29 AM

Thanks for the reply. You need to start a thread on that.

Yarhj · April 13th, 2015, 12:16 PM

That looks like it will be amazing when it's finished! Can't wait to see the end result!

thedrewski86 · April 19th, 2015, 06:04 AM

Qomomoko · April 19th, 2015, 06:39 AM

Quote:

Originally Posted by thedrewski86

Hey so the Ninjette is done being parted out. Since the frame and engine still remain it is getting the cheap super-moto treatment! No title of course so this will be a dirt-only bike but it should be a blast. Here it is:

cool project.. hey.. so the exhaust can support the weight of the engine without damage? Trying to decide how to take the frame of mine to get it painted or powder coated..

thedrewski86 · April 21st, 2015, 05:20 PM

Here are the pipes:

and yeah the original header pipes weren't really of any condition to worry about!

Quick video of it running: https://scontent-ord.xx.fbcdn.net/hv...29&oe=55371250

Qomomoko · April 24th, 2015, 09:29 AM

Question for you and guys..

the clutch cable adjuster (the one by the left hand), is it the same for pregen and new gen? What is the screw size/pitch?

My 08 perch looks nice but the clutch cable adjuster I lost.
The clutch cable adjuster from my 1993 wont fit, maybe the 08 perch threads are crossed or something.

July 20th, 2014, 01:46 AM	#43
Daks Jersey Devil Name: Daks Location: Austin, TX Join Date: Oct 2012 Motorcycle(s): '06 Ninja 250 Posts: 469	How do the rotors look? __________________________________________________ ~Riding like a grandma because I wanna ride as a grandma~

July 25th, 2014, 05:38 AM	#46
thedrewski86 ninjette.org guru Name: Drew Location: SoCal Join Date: Jul 2013 Motorcycle(s): 2007 SV650S 2005 EX250F Posts: 486	Sorry for not getting back to people in a while, I will try to get to this over the weekend. I'm hoping to get pics of most of the parts uploaded to this thread soon with prices. __________________________________________________ Don't think, look!

August 8th, 2014, 10:02 AM	#49
sunnyboy sunnyboy Name: Larry Location: southern Oregon Join Date: Aug 2014 Motorcycle(s): 2007 Ninja 250, 2007 Vstrom 650 Posts: 6	parts available? Do you have the right front turn signal bracket (the base piec flush against the fairing) part #23051A? Do you the Radiator cover (the inner front fairing piece) part #14024H?

August 29th, 2014, 07:38 AM	#54
Roark ninjette.org sage Name: James Location: Lakeland Join Date: Aug 2014 Motorcycle(s): 2007 Ninjette Posts: 809	It's not pictured.. But figured I'd ask anyways.. Do you have the rear fender? Specifically anything resembling rear blinkers and the license plate bracket. __________________________________________________ "That's what" -she

January 19th, 2015, 10:00 AM	#55
FvnnyL3tt3r1ng ninjette.org certified postwhore Name: Justin Location: Florida Join Date: Aug 2012 Motorcycle(s): Ninja 250 2001 Posts: A lot.	Not sure if you sold the gas tank? Engine? __________________________________________________ Mods: Offset clutch pressure plate

June 28th, 2014, 08:13 PM	#41
DCkilla ninjette.org member Name: DJ Location: Wet Side, WA Join Date: Apr 2013 Motorcycle(s): 2005 Ninja 250 Posts: 30	Are the front forks available?

July 20th, 2014, 08:24 PM	#44
hamburglar ninjette.org member Name: Jason Location: Ashton, ID Join Date: May 2014 Motorcycle(s): 2004 Ninja 250R Posts: 26	I'm in need a few parts for my '04. -clutch lever -left bar end -shift lever -center stand -front / left turn signal -front axle / nut Please let me know if you have any of these and send me a price / shipping for them.

July 25th, 2014, 12:27 AM	#45
flitecontrol ninjette.org guru Name: Lee Location: Monroe, LA Join Date: Feb 2014 Motorcycle(s): Rebel 250s, Ninja 250s VN750s (currently nine total) Posts: 465	What about the four bolts that hold the fairings onto the tank? Are they in good shape (not boogered)? If yes, how much shipped to 71201?

July 25th, 2014, 08:22 AM	#47
Z1R rider ninjette.org certified postwhore Name: Roger Location: Mitchell, South Dakota Join Date: Apr 2014 Motorcycle(s): 1978 Z1R, 1999 EX250 Posts: A lot. MOTY - 2018, MOTM - Oct '16	I'm needing a windshield and the nuts and bolts that hold it, do you still have these?

August 18th, 2014, 11:24 PM	#50
MrAtom . Name: . Location: . Join Date: Aug 2014 Motorcycle(s): . Posts: A lot. MOTM - July '15	Sorry to bump up an old post, but if you've got the upper fairing (I don't need the windshield) how much would you charge for it?

August 19th, 2014, 08:52 PM	#52
NAFREEK ninjette.org newbie Name: Angus Location: Lincoln Join Date: Feb 2014 Motorcycle(s): 2003 Ninja 250R Posts: 5	How much for the rims and tires? Are they in good shape? my zip is 68522. Thank you

January 31st, 2015, 06:17 PM	#57
daisha ninjette.org member Name: Daisha Location: Redlands, CA Join Date: Apr 2013 Motorcycle(s): 06 Ninja 250, 14 FZ-09 Posts: 80	Did anyone end up picking up the forks?

February 21st, 2015, 09:09 PM	#59
propilot ninjette.org member Name: keV Location: NYC Join Date: Feb 2015 Motorcycle(s): 04 ex250 Posts: 116	Did eulark buy that starter motor or is it still available?

February 26th, 2015, 12:59 PM	#60
ieathonda ninjette.org member Name: William Location: Houston Join Date: Feb 2015 Motorcycle(s): Ninja EX250F Posts: 110	could you pm me a price for the front fairing to 77459 please?

April 12th, 2015, 07:45 PM	#61
thedrewski86 ninjette.org guru Name: Drew Location: SoCal Join Date: Jul 2013 Motorcycle(s): 2007 SV650S 2005 EX250F Posts: 486	Hey so the Ninjette is done being parted out. Since the frame and engine still remain it is getting the cheap super-moto treatment! No title of course so this will be a dirt-only bike but it should be a blast. Here it is: __________________________________________________ Don't think, look!

April 12th, 2015, 10:46 PM	#62
MrAtom . Name: . Location: . Join Date: Aug 2014 Motorcycle(s): . Posts: A lot. MOTM - July '15	Dude thats sick! Youre gonna have to set the gearing super short though. These bikes have like no torque. Should still be a blast, though! Keep us posted!

April 13th, 2015, 05:29 AM	#63
N-m Captain 2 Sexy Name: Newton Location: South TN Join Date: Apr 2014 Motorcycle(s): Kwaka EX250 Posts: 241	Thanks for the reply. You need to start a thread on that.

April 13th, 2015, 12:16 PM	#64
Yarhj ninjette.org member Name: Will Location: Atlanta, GA Join Date: Feb 2013 Motorcycle(s): Ninja 250 (2001) Posts: 135	That looks like it will be amazing when it's finished! Can't wait to see the end result!

April 19th, 2015, 06:04 AM	#65
thedrewski86 ninjette.org guru Name: Drew Location: SoCal Join Date: Jul 2013 Motorcycle(s): 2007 SV650S 2005 EX250F Posts: 486

April 21st, 2015, 05:20 PM	#67
thedrewski86 ninjette.org guru Name: Drew Location: SoCal Join Date: Jul 2013 Motorcycle(s): 2007 SV650S 2005 EX250F Posts: 486	Here are the pipes: and yeah the original header pipes weren't really of any condition to worry about! Quick video of it running: https://scontent-ord.xx.fbcdn.net/hv...29&oe=55371250

April 24th, 2015, 09:29 AM	#68
Qomomoko ninjette.org guru Name: Luis Location: Miami Join Date: Sep 2014 Motorcycle(s): 1995 Ninja 250, 2005 R6, 2002 Ducati Monster S4 Posts: 250	clutch cable adjuster... Question for you and guys.. the clutch cable adjuster (the one by the left hand), is it the same for pregen and new gen? What is the screw size/pitch? My 08 perch looks nice but the clutch cable adjuster I lost. The clutch cable adjuster from my 1993 wont fit, maybe the 08 perch threads are crossed or something.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: 2008 Ninja 250 (Black) Complete Part Out	Baddog	Motorcycle-related	303	September 3rd, 2013 05:59 AM
08' Ninja 250 Parts bike part out you name the part and price	BuckyNaked	Motorcycle-related	106	July 12th, 2011 02:01 PM