|
March 31st, 2017, 12:01 PM
|
#1 |
|
ninjette.org newbie
Name: Dylan
Location: Indiana
Join Date: Mar 2017 Motorcycle(s): 08 Ninja 250r Posts: 3
|
Flush Mount Turn Signal Problem
When I got my Ninja last week it came with two turn signals because the previous owner had broken one off so he took the other one off (not sure why), but the turn signals he gave me are the generic ones with dual filaments so it has three wires. I was holding the all black wire to the red wire and the black wire with the white line to the other one on the turn signal and the signal was flashing for about 15 seconds then it stopped, and wouldn't flash again. Can someone help me figure this out?
|
|
|
|
March 31st, 2017, 12:08 PM
|
#2 |
|
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
sounds like a blown fuse
__________________________________________________
 Keep calm and ride on  -MotofoolNever quit on a rainy day -ally99 |
|
|
|
|
March 31st, 2017, 01:26 PM
|
#3 |
|
ninjette.org newbie
Name: Dylan
Location: Indiana
Join Date: Mar 2017 Motorcycle(s): 08 Ninja 250r Posts: 3
|
So will I have to buy the part that clips into the connector on the turn signal?
|
|
|
|
|
March 31st, 2017, 04:29 PM
|
#4 |
|
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
You need to replace the blown fuse. How were you holding wires to each other?
__________________________________________________
Keep calm and ride on -MotofoolNever quit on a rainy day -ally99 |
|
|
|
|
March 31st, 2017, 05:32 PM
|
#5 |
|
ninjette.org newbie
Name: Dylan
Location: Indiana
Join Date: Mar 2017 Motorcycle(s): 08 Ninja 250r Posts: 3
|
I was just holding the stripped wires to the connector pins of the turn signal
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Flush Mount Turn Signal DIY | n4mwd | 1986 - 2007 Ninja 250R Farkles | 37 | June 23rd, 2014 05:38 PM |
| Flush mount turn signal | Angel | 2008 - 2012 Ninja 250R Farkles | 4 | June 12th, 2014 08:41 AM |
| WTB: Petcock, Front turn signal lights standard or flush with mount. | agentbad | Items Wanted | 2 | September 16th, 2013 12:37 PM |
| Flush Mount Turn Signal Options - Need Advice | bbjminardo | 2008 - 2012 Ninja 250R Farkles | 14 | February 19th, 2013 07:27 PM |
| DIY: Pregen Fender Chop/Flush mount turn signal mod | brian997 | 1986 - 2007 Ninja 250R Tech Talk | 8 | March 29th, 2009 09:37 AM |
|
|
