Removing ignition

NathanUc · March 25th, 2012, 04:28 PM

Hello,

Quick question. When I was trying to remove the stock ignition switch to replace my triple tree, I came across some odd bolts holding it in place. They appear to be just the screw with the heads cut off or something and I have NO idea how to remove them in order to get the ignition housing off the stock triple clamp.

Anyone shed some light on these annoying bolts? Do I have to drill them out? (The aftermarket triple tree has the bolts/bracket to mount the ignition, so there must be a way to remove it?)

I couldn't get a good picture of them so I hope this was enough info.

Thanks in advance.

NathanUc · March 26th, 2012, 11:38 AM

I found my answer thanks to a local friend. Apparently for security reasons, you must drill out those heads in order to remove the ignition.

March 25th, 2012, 04:28 PM	#1
NathanUc B-Town Ninja Name: Nathan Location: Bloomington, IN Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609 Blog Entries: 3	Removing ignition Hello, Quick question. When I was trying to remove the stock ignition switch to replace my triple tree, I came across some odd bolts holding it in place. They appear to be just the screw with the heads cut off or something and I have NO idea how to remove them in order to get the ignition housing off the stock triple clamp. Anyone shed some light on these annoying bolts? Do I have to drill them out? (The aftermarket triple tree has the bolts/bracket to mount the ignition, so there must be a way to remove it?) I couldn't get a good picture of them so I hope this was enough info. Thanks in advance. __________________________________________________ Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja

March 26th, 2012, 11:38 AM	#2
NathanUc B-Town Ninja Name: Nathan Location: Bloomington, IN Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609 Blog Entries: 3	I found my answer thanks to a local friend. Apparently for security reasons, you must drill out those heads in order to remove the ignition. __________________________________________________ Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Removing the carb-without removing airbox?	tuscani451	2008 - 2012 Ninja 250R Tech Talk	10	July 6th, 2014 05:11 AM
Removing thermostat	Triple R	2008 - 2012 Ninja 250R Tech Talk	10	June 28th, 2014 08:44 AM
removing the ignition	the jelly man	2008 - 2012 Ninja 250R Tech Talk	9	July 26th, 2013 06:21 PM
Removing the flames?	ninja07	1986 - 2007 Ninja 250R Farkles	14	June 20th, 2012 07:15 AM
Removing Mirror Bracket (with removing all the fairings)	killermase	2008 - 2012 Ninja 250R Tech Talk	11	May 21st, 2012 11:16 PM