June 12th, 2012, 07:03 AM | #1 |
OMRRA 701
Name: .
Location: PDX
Join Date: Jan 2012 Motorcycle(s): 'jette, R6 Posts: 96
|
WTB: Front Axle Wheel Spacer
If anybody has a spare front wheel spacer could you contact me please?
Just to clarify, not looking for the speedo assembly spacer but rather that metal spacer that goes on the rotor side of the wheel. thanks! Kangxi PDX |
|
June 12th, 2012, 07:55 AM | #2 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
This one? Shipping is crazy but if you got to have one....
http://www.ebay.com/itm/K56-Kawasaki...9eef5c&vxp=mtr
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
June 12th, 2012, 08:50 AM | #3 |
OMRRA 701
Name: .
Location: PDX
Join Date: Jan 2012 Motorcycle(s): 'jette, R6 Posts: 96
|
Thanks Jason - do you know if the pregen spacer also works on newgen wheels?
thanks again for the link! I scoured ebay but was only looking for 08+ :: hat tip :: |
|
June 12th, 2012, 08:55 AM | #4 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Oh sorry. I checked the OEM parts catalog and it looks as if they are in fact different on the pre-gen's.
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
June 12th, 2012, 09:07 AM | #5 |
OMRRA 701
Name: .
Location: PDX
Join Date: Jan 2012 Motorcycle(s): 'jette, R6 Posts: 96
|
yeah, it's a little surprising but the wheels are different so I guess the whole setup is a bit different.
OK, so who out there has a newgen wheel spacer taking up valuable room in their garage??? hey? hey? |
|
June 12th, 2012, 10:43 AM | #6 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
What about this one? Has more than you need but...
http://www.ebay.com/itm/08-Kawasaki-...8ba4d8&vxp=mtr
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
June 12th, 2012, 11:00 AM | #7 |
OMRRA 701
Name: .
Location: PDX
Join Date: Jan 2012 Motorcycle(s): 'jette, R6 Posts: 96
|
that'll do! most of the axles on ebay are going for 20 to 40 bucks (pricing for misc ninja parts are all over the map).
This one's $5 plus shipping. Good find I owe you one! |
|
June 12th, 2012, 11:05 AM | #8 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Happy to help man! GL!
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
June 13th, 2012, 05:47 AM | #9 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
That said, my pregen has newgen wheels which required a custom left-side spacer that @Jiggyfly created. The pregen speedo sender/meter gear does not have a removable spacer, while it looks like the newgen does. I wanted to see if it just happened to fit over the spacer Jiggyfly made but my front stand broke before I could. |
|
|
June 13th, 2012, 06:04 AM | #10 | |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Quote:
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
|
June 13th, 2012, 09:22 AM | #11 |
OMRRA 701
Name: .
Location: PDX
Join Date: Jan 2012 Motorcycle(s): 'jette, R6 Posts: 96
|
It's too bad that there are not more 250 parts for sale on this board. That is surprising to me given how many 250s are out there on the street. A friend of mine who buys/sells all kinds of bikes here in the NW said that he has sold 47 ninja 250s over the past two years. That's crazy! So where are all the parts coming off crashed bikes et cetra? Do those riders simply not use ninjette? Are they unaware of this board? I can find pretty much anything for an R6 within, say, a week just because the board community is so large. Parts are flying every single day. And yet you look for race parts for an EX250 and there's just nothing. I wonder if we will start to see the odd set of clip-ons or rearsets come up on the board now that EX250 racing is starting to take off. I know up here there are a lot of guys racing in bigger classes who are looking to build a 250 racer but are kind of holding off b/c all the race parts cost more than the bike itself due to the fact that those parts must be purchased new. It's not like one is going to find a used full leo just kicking around on the board.
Sorry for the ramble, just random thoughts. Anybody else have any thoughts on this? |
|
June 13th, 2012, 02:24 PM | #12 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
We love our bikes so much that when we drop them we end up CONSUMING the supply of parts instead of adding to them.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is My Axle Spacer on Right? | Hatter | 2008 - 2012 Ninja 250R Tech Talk | 4 | March 19th, 2015 12:07 PM |
Replaced a NewGen front wheel? I need your bearing spacer! | InvisiBill | Items Wanted | 10 | February 20th, 2014 01:04 PM |
08+ new gen front wheel, rotor, tire, axle, speedo | gt_turbo | Motorcycle-related | 8 | August 4th, 2012 07:35 PM |
|
|