February 12th, 2010, 02:45 PM | #1 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
eBay DIY Fender Eliminator with LED
I just recently bought this kit for about 40$ shipped.
Ninja 250 R Fender eliminator complete kit 250R UNIV The LEDs in this kit are crap. Putting out about 600 mW of very narrow light, instead of the stamped 1W on the cover. 3-4x less visible that the stock signals, they only take up about 51 mA per signal. That's less that 4 mA per LED (there are 14 in all) resulting in uber poor output. There things are not waterproof/and barely water resistant. I poped the cover off with my nail to find out the negative pole wire was about to break. My cellphone give off more light that this. Either buy a proper kit or use the DIYs provided here. this kit definitely isn't worth its price. |
|
February 12th, 2010, 03:29 PM | #2 |
ninjette.org member
Name: Steven
Location: los angeles
Join Date: Dec 2009 Motorcycle(s): 2009 250r green(sold) 2009 zx6r green Posts: 96
|
too bad, sorry, and thank you for the heads up
|
|
February 12th, 2010, 03:31 PM | #3 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
Yeah, it's just a waste of time. But they offered me a complete refund. And their shipping service is pretty fast. I received it in about 5 days, and I'm up-north.
|
|
February 12th, 2010, 03:47 PM | #4 |
ninjette.org member
Name: Steven
Location: los angeles
Join Date: Dec 2009 Motorcycle(s): 2009 250r green(sold) 2009 zx6r green Posts: 96
|
wow, by complete , do you meant they even paid you the shipping cost to ship back to them?
|
|
February 12th, 2010, 04:01 PM | #5 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
no, except shipping. but it cost them $2.71 to ship it to me, and this was across the bordes, so I can imagine that it shouldn't cost that much more to send it back.
and even if its $5 s&h, most sellers don't even offer a refund unless defective. at least I'm not stuck with it. |
|
February 12th, 2010, 04:34 PM | #6 |
You are sleeping
Name: Casey
Location: LMFAO!!!
Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.
|
Dang dude, MAJOR thanks for the warning. That's the eliminator I was thinking about doing.
__________________________________________________
<Yeah, it's a 250. LMFAO! Weaksauce |
|
February 12th, 2010, 04:51 PM | #7 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
And about the main bracket, it is very light, but requires you to chop off the tail anyways. This kit included nothing to bolt the bracket on and come with NOTHING but the bracket. Not even Instructions, but then again, I probably would of have figured it out myself.
What they have to say: "The installation is so simple that it does not require/include any instructions." Anyways, I'm keeping an eye out on fatbikez.com If you do buy something use this coupon code: ship4free You can take a guess what you get with that. |
|
February 12th, 2010, 04:55 PM | #8 |
ninjette.org member
Name: Steven
Location: los angeles
Join Date: Dec 2009 Motorcycle(s): 2009 250r green(sold) 2009 zx6r green Posts: 96
|
thank you for the coupon code...just what i need
|
|
February 12th, 2010, 04:56 PM | #9 |
Pedal Power
Name: Rob
Location: Winterpeg (Winnipeg)
Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401
|
I was looking at that one originally. Might be up for selling mine. Going with the Ducati Tail with the integrated turn signals. I want to wait till I get it before I decide to sell, might still need a license bracket (but I might be able to make one)
__________________________________________________
Using Pedal Power |
|
February 12th, 2010, 05:18 PM | #10 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
You can buy license plate brackets for 3-4$ at your local automotive store, if that's all you need check it out, or for 5$ ill buy and ship one to you. I hate to see people getting ripped.
|
|
February 13th, 2010, 09:08 AM | #11 |
Ride it like you stole it
Name: Jeremy
Location: Bama
Join Date: Jan 2010 Motorcycle(s): '09 Ninja 250R, '04 R6(sold) Posts: 362
|
Those blinkers look neat, but sorry to hear it did not work out.
I bought the Targa kit last year but did not like the fit & finish. I took my time and did a very professional looking custom job. |
|
February 13th, 2010, 11:12 AM | #12 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
Yeah, I definitely love the blinkers style, but you can get them for 6-12$ on eBay if you look. I'm looking at the Targa kit now. Probably the one I'm going for. I absolutely want a no-cut Fender Eliminator (FE)
|
|
February 13th, 2010, 11:16 AM | #13 |
Ride it like you stole it
Name: Jeremy
Location: Bama
Join Date: Jan 2010 Motorcycle(s): '09 Ninja 250R, '04 R6(sold) Posts: 362
|
Research it well before you buy the Targa kit. I was really disappointed in it myself, but i'm VERY picky.
|
|
February 13th, 2010, 11:48 AM | #14 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
Well I've looked at a few of them, so far I don't like the Competition Werks I believe is a CUT, so that's out of the question.
This standard kit, is very decent to my likings: http://www.bikelitez.com/PhotoGaller...=K0809250RSTDF But for 150$, I'm going to keep searching. I'm also considering the Hotbodies complete undertail this one is 125$, its transparent black and covers the taillight. Maybe Ill make my own out of fiberglass? That could always be an option |
|
February 13th, 2010, 12:19 PM | #15 |
Ride it like you stole it
Name: Jeremy
Location: Bama
Join Date: Jan 2010 Motorcycle(s): '09 Ninja 250R, '04 R6(sold) Posts: 362
|
The Bikelitez kit looks ok except for those blinkers and $150 is way too much $$ for what ya get.
I like that hotbodies undertail kit. It looks really clean. I just pulled up the installation instructions from their website. Looks like alot of cutting for this one, but wow it looks nice. |
|
February 16th, 2010, 02:29 PM | #16 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
Even though I wasn't satisfied with the quality of the kit, this seller is definitely getting positive feedback. He refunded me before I even shipped his package back to him. A+++
|
|
February 16th, 2010, 02:36 PM | #17 |
ninjette.org member
Name: David
Location: Waxahachie
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250r SE green with Monster energy decals!!! Posts: 223
|
I bought that fender eliminator from ebay and it didn't even fit my bike!!!!
|
|
February 18th, 2010, 06:24 AM | #18 |
ninjette.org member
Name: Alexandre
Location: Montreal
Join Date: Jul 2009 Motorcycle(s): Ninja 250r 09 SE Posts: 172
|
i bought 2 targa kit, and so far, i found them nice.
|
|
February 18th, 2010, 01:10 PM | #19 | |
ninjette.org sage
Name: aj
Location: New York / PA
Join Date: Jul 2009 Motorcycle(s): Red 09 Ninja 250r aka Sheila (RIP), Red '10 Ninja 250r aka Sasha (Sold), White '13 Ninja 300 (To be Purchased) Posts: 855
|
I was considering Targa as well, but havent settled yet.
Quote:
I dont like the compwerkes bc it requires cutting. not a fan of doing things that can't be undone. The bikelitez looks pretty decent tho but idk about the price
__________________________________________________
|
|
|
February 18th, 2010, 05:17 PM | #20 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
I found the perfect Eliminator Kit to my likings, about 100$ shipped, pretty simple but definitely love the finish. Comes with interchangeable license plate brackets.
+1 But best of all, it is made in 1 piece: www.projektd.com |
|
February 19th, 2010, 01:42 PM | #21 | |
ninjette.org sage
Name: aj
Location: New York / PA
Join Date: Jul 2009 Motorcycle(s): Red 09 Ninja 250r aka Sheila (RIP), Red '10 Ninja 250r aka Sasha (Sold), White '13 Ninja 300 (To be Purchased) Posts: 855
|
Quote:
__________________________________________________
|
|
|
February 23rd, 2010, 09:53 PM | #22 |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
|
|
February 24th, 2010, 03:32 AM | #23 |
no joy
Name: Six
Location: Cali
Join Date: Nov 2009 Motorcycle(s): Ninja 2006 636 Posts: 408
|
Hey Jon great choice... I got the rumble concept fender elim they included a LED LIC light wich is ok... seems yours has fins to close up any gaps at the top( or is it the cowl??) i was considering getting this but i think projekt was in some far away land -lol-... also the intergration of the lic plate light seems like a blessing...
You can take a drill to the hook and light mouting rivits on the stock fender and reuse your loading hooks and stock lighting... wich i think is a lil safer and you wont have to fumble with LEDS harness ect... But great choice... |
|
March 26th, 2010, 03:52 PM | #24 | |
ninjette.org member
Name: Dave
Location: DFW, US
Join Date: Mar 2010 Motorcycle(s): 2008 Ninja TwoFiddy Posts: 160
|
Have you looked at the BikeLitez KAWASAKI 250 R SS FENDER ELIMINATOR?
http://www.youtube.com/watch?v=IfTPU7mFHmA EDIT Some issues... http://www.kawiforums.com/ninja-250r...nator-kit.html Quote:
http://www.kawiforums.com/1885339-post40.html |
|
|
March 28th, 2010, 08:28 AM | #25 |
ninjette.org certified postwhore
Name: Lil One
Location: NB Canada
Join Date: Mar 2009 Motorcycle(s): '09 Ninja 250 Black Posts: A lot.
|
I really like the projekt D fender eliminator but when i went to their website i couldn't find much information on the company. I couldn't find where they were situated or what country they in and how much it was for international shipping assuming they're outside Canada.
__________________________________________________
I'm not small, I'm fun sized |
|
March 28th, 2010, 11:24 AM | #26 |
ninjette.org sage
Name: Dan
Location: Perryopolis, PA
Join Date: Mar 2010 Motorcycle(s): 09' Blue Ninja 250R and 07' Honda 919 Posts: 605
|
Does that PROJEKTD one need cutting?
|
|
March 28th, 2010, 11:45 AM | #27 |
ninjette.org certified postwhore
Name: Lil One
Location: NB Canada
Join Date: Mar 2009 Motorcycle(s): '09 Ninja 250 Black Posts: A lot.
|
I don't believe so by looking at the pieces. I have my tail off right now and they seem to fill the hole i have now. Here's the link if you want to go look.
http://projektd.com/product_info.php?products_id=148
__________________________________________________
I'm not small, I'm fun sized |
|
March 29th, 2010, 01:32 PM | #28 | |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
Quote:
http://cgi.ebay.com/ebaymotors/Kawas...item1e5ae06322 |
|
|
March 29th, 2010, 01:34 PM | #29 | |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
Quote:
|
|
|
April 10th, 2010, 10:07 AM | #30 |
Ride it like you stole it
Name: Jeremy
Location: Bama
Join Date: Jan 2010 Motorcycle(s): '09 Ninja 250R, '04 R6(sold) Posts: 362
|
At this point, I have looked at every eliminotor kit out there. I'm not sold on any of them, expecially for what they cost. I did a custom job on mine that cost me $14.75 only because I bought LED tag bolts. It looks far better than any aftermarket kit I have seen. I will be chop'n my friend's fender this week. I will have to get some pics posted.
|
|
April 10th, 2010, 11:47 AM | #31 | |
ninjette.org sage
Name: Jon
Location: Usa
Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649
|
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chinese Ebay Fender Eliminator | Vad18 | 2008 - 2012 Ninja 250R Farkles | 4 | May 6th, 2014 12:08 PM |
Fender Eliminator w/LED (eBay) | mfresh | 2008 - 2012 Ninja 250R Farkles | 12 | February 18th, 2013 10:42 AM |
The $0 DIY fender eliminator! | jezebel | 2008 - 2012 Ninja 250R Farkles | 11 | March 14th, 2012 04:53 AM |
DSpinler's DIY - eBay LED strip install | DSpinler | 2008 - 2012 Ninja 250R Tech Talk | 12 | February 19th, 2012 04:16 PM |
Looking for DIY fender eliminator? | OfftheWaffle | 2008 - 2012 Ninja 250R Tech Talk | 1 | June 8th, 2011 01:51 AM |
Thread Tools | |
|
|