![]() |
![]() |
#1 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
![]()
Hey guys.
![]() Here are the threads that already talked about it. http://www.ninjette.org/forums/showthread.php?t=15089 http://www.ninjette.org/forums/showthread.php?t=22326 http://www.ninjette.org/forums/showthread.php?t=22758 So my questions are these: 1. Does anybody have access to any sort of vinyl or sticker maker that could help us with the manufacturing of these decals? 2. What kinds of decals do we want? Do we want multiple sizes and designs or one size and one design? Depending on your answer to the last questions, what size(s) and design(s) would you want, text on solid background, ninjette picture, etc.? 3. How many people would be interested in getting a sticker like this? If we make and buy in bulk, it should be cheaper, so the more we get on board (pardon the pun ![]() We already have a few design possibilities for this sticker and I'm sure we could come up with more, but we need to figure out if we can actually make them and how we're paying for them before we get to that part. So who's interested? ![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#2 |
ninjette.org certified postwhore
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.
|
Beast has the ability to print them - someone should talk to him
__________________________________________________
Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders |
![]() |
![]() |
![]() |
#3 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
You wouldn't happen to have a way to get to Beast's profile would you? I'll send the PM, but I have to have a way to get there.
![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#4 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Nevermind. I found Beast's page and sent a PM. Waiting on a reply from that end. Anybody else able to make this kind of sticker?
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#5 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
![]() Anybody have any ideas on what to make, how to make them, and who can? I saw some interest in other threads, but it seems like it died. Nobody else likes the idea or what? ![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#6 |
Join Date: Nov 2008 Posts: Too much.
|
what did beast say?
![]() |
![]() |
![]() |
![]() |
#7 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Beast still hasn't answered back, but I don't want him to think he's our only option. I'm sure with our thousand members, someone's got to have the ability to make a sticker!!
![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#8 |
Join Date: Nov 2008 Posts: Too much.
|
|
![]() |
![]() |
![]() |
#9 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Wow Kelly, you're getting ahead of me! I already talked to Alex about this possibility, and he said we need to work out the logistics first. Hence my search for people who can make the stickers.
![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#10 |
ninjette.org guru
Name: Nick
Location: Sacramento, California.
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379
|
Well from what I know about this sort of the thing, the cheapest option is to pay for a company to make them. They already have the high end $2-5k printer and buy their materials in bulk.
Highest end pricing would probably be ~50cents a vinyl, and as cheap at ~8cents a vinyl. I was looking at this company a while back: http://www.stickerobot.com/pricing/ In case you don't want to read, 1-4 colors max. No price difference between 1 or 4 colors. Min. order 1k stickers... so these will be easy to keep in stock ![]() |
![]() |
![]() |
![]() |
#11 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Nice link dude! I'm not sure we'd order 1k stickers, but it's a good start. I didn't read all of it yet, so my complete impression of it comes tomorrow. Sleep time!
![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#12 | |
ninjette.org guru
Name: Nick
Location: Sacramento, California.
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379
|
Quote:
From what I've seen its like $1-$3 each to print small orders ![]() |
|
![]() |
![]() |
![]() |
#13 | |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
Was gonna have you check with Gail over on FSB, but I just did and:
Quote:
![]() If you guys come up with something ya want, we can ask tina at turn one performance/graphics also. Or you can ask them(John/Tina) here: http://www.pensacolariders.com/forum...splay.php?f=10 |
|
![]() |
![]() |
![]() |
#14 |
ninjette.org sage
Name: Howard
Location: Cypress, So. Cal.
Join Date: Feb 2009 Motorcycle(s): '09 Candy Thunder Blue Ninja 250R Posts: 618
|
yea, im sorry for not pulling through with the decal, I was embarrassed to say that it was too hard for me to accomplish. making a decal from scratch is harder than I thought! (oh and thanks michael for bumping up this idear once again)
|
![]() |
![]() |
![]() |
#15 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
I work in a sign shop that can produce custom vinyl decals. Let me know decal size, quantity, ect and I'll throw some prices back.
|
![]() |
![]() |
![]() |
#16 |
ninjette.org guru
Name: Purspeed
Location: Los Angeles, CA
Join Date: Nov 2008 Motorcycle(s): 2007 Ninja 250 Posts: 469
|
...still awaiting a reply for my 250r decal
![]()
__________________________________________________
![]() "This is my Ninja. There are many like it, but this one is mine..." ~ Purspeed (ca. Nov, 2008) |
![]() |
![]() |
![]() |
#17 |
ninjette.org member
Name: Bill
Location: Easley, SC
Join Date: Jan 2009 Motorcycle(s): '08 Ninja 250 R.I.P. Posts: 84
|
I have a guy that I used to work with that got laid off that does vinyl. He could use the business. He just found out his wife is pregnant right before he was laid off. He's been doing some bikes locally. Get me some ideas and I'll hit him up.
|
![]() |
![]() |
![]() |
#18 |
ninjette.org member
Name: Ken
Location: NY
Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R Candy Plasma Blue Posts: 129
|
What are you looking for? I own a vinyl cutter, I can cut single color decals. I can not make multi color printed graphics, but I could layer different colors for one decal.
Ken |
![]() |
![]() |
![]() |
#19 | ||||
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Quote:
Quote:
![]() Quote:
Quote:
![]() Oh, and Beast still hasn't answered me back, just to let you guys know. ![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
||||
![]() |
![]() |
![]() |
#20 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
![]() ![]() ![]() ![]() ![]() C'mon guys! What size would you want?
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#21 |
ninjette.org guru
Name: Nick
Location: Sacramento, California.
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379
|
Well we should look at some of the places it could be located on a bike and then base its size off that. Too big for most places would be annoying.
|
![]() |
![]() |
![]() |
#22 |
ninjette.org sage
Name: Tim
Location: Portland, OR
Join Date: Dec 2008 Motorcycle(s): 2009 SE Ninja 250R Posts: 796
|
Main spots are usually the swingarm and the windscreen. Bigger ones could go on the bottom of the front fairings. But we'd need another logo (one less complicated) or it would have to be just font. Also check out muffinman's dark logo
http://www.cafepress.com/ninjette_org |
![]() |
![]() |
![]() |
#23 |
ninjette.org sage
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914
|
Im down for a small and simple Ninjette.org vinyl for my windscreen. I do not currently have a ruler at school haha. It should be fairly small but proportional so it doesnt look stretched or clumped up...so it should be whatever those dimensions are.
![]() |
![]() |
![]() |
![]() |
#24 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Ok, so then about 4X2 (inches)? Is that about right or would you want it a bit smaller?
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#25 |
ninjette.org sage
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914
|
Sounds good to me. I think we should get the contest going, settle on a design, and start asking around to see how much it would cost at different sources for the design. Simple would be the cheapest and is at time the best way to go. We want to represent Ninjette but we dont wanna look tacky doin it
![]() |
![]() |
![]() |
![]() |
#26 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
We should wait a bit to start the contest.
![]() ![]() On the note of who is planning to make it, Sean (Bob706) and Bill (Bsmith) both said they had possibilities on manufacturing. Can you guys find out how much it would cost for a few different possibilities? I'm thinking probably 4"X2", all color, with a max of 4 different colors (so it doesn't get to pricey, but still leaves us open for some originality). I'd also like to make sure we use colors that won't fade from sunlight or weather, like a sticker I got from Fulmer helmets recently that went from red to pink in a matter of weeks. ![]() ![]() Anything I missed guys? Alex, if we're missing anything, help us out! It is your site, after all. You should have a say in it's advertising. ![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#27 |
ninjette.org guru
Name: Nick
Location: Sacramento, California.
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379
|
4x2 sounds about right. I haven't been around my bike today so haven't had a chance to measure anything out.
Well for the $ part.. does Alex want to handle the purchasing? As the profits should go to him (site is his) and any promotion would go to his forums (ours, but still his ![]() I think something like $2/shipped for 2 based off the average prices I'm seeing is a fair estimate. The actual price would obviously have to wait until a printer is selected. Templates can be downloaded here: http://www.stickerobot.com/templates/ 4x2 looks like what it should be but I would make it at something like 8x4 so that in the end you will have the option for both 8x4 and 4x2 (although no official contest yet, but if you want to play around ideas :P ) |
![]() |
![]() |
![]() |
#28 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Michael, you're doing great. Sounds like things are moving down the right track. I don't want to start a sticker contest, have us vote on a winner, then get to the end and realize that particular design can't be made at the right price for a reason that we hadn't thought of ahead of time, or we have to order more than we'd want, and a few other logistics issues that may seem minor now but can seem larger when you have to actually deal with them.
Once we can agree on the major "how's", then we can get down to the "what's" and have a proper contest... Winner will not only be immortalized under their username in their profile (like ARc!), but will take home a pile of the stickers as well as some credit in the ninjette.org store as well.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
![]() |
![]() |
![]() |
#29 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
I do not want to get involved in the purchasing (and subsequent individual shipping) for the vinyl, and I'm not overly concerned about another ninjette.org member making a small profit on the stickers if they are taking the time to deal with the purchasing/orders/shipping hassle already.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
![]() |
![]() |
![]() |
#30 |
Join Date: Nov 2008 Posts: Too much.
|
I think the first order of business should be to gauge interest. A thread with a poll in it should give you an idea if this is going to fly or not with the rest of the forum members.
not a commitment to purchase, but just to see how many like the idea and would possibly buy some if they were available. ![]() |
![]() |
![]() |
![]() |
#31 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Poll thread started. Go vote people!!!
![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#32 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Quick question... How long should we give members to answer on the poll? A week or so? More?
![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#33 |
Join Date: Nov 2008 Posts: Too much.
|
I would say till you see a trend forming and can gauge the percentage from the responses. It's not accurate, but at least gives you some idea to move ahead on this or not.
|
![]() |
![]() |
![]() |
#34 |
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Gotcha!
![]()
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
![]() |
![]() |
![]() |
#35 |
ninjette.org guru
Name: Nick
Location: Sacramento, California.
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379
|
So here is one idea... simple, blends with the ninja style and existing logos. I prefer something non-invasive to the style of the ninja. (this is not to scale, or centered, I took the font from the finished template and sized it down for the forums)
![]() Although a clear vinyl with black or white font would also be cool, but might cost more$ |
![]() |
![]() |
![]() |
#36 |
Ramen Rider
Name: Gary
Location: Honolulu, Hawaii
Join Date: Jan 2009 Motorcycle(s): 2015 BMW R1200R, 08 Honda VFR800A (sold), 09 Ninja 250R (sold) Posts: A lot.
|
this is the guy who made my "kawasaki" logo for my zg db
http://www.kawiforums.com/sale-after...-graphics.html |
![]() |
![]() |
![]() |
#37 | |
3 for street, 2 for dirt
Name: Katlyn
Location: San Francisco Bay Area (California)
Join Date: Mar 2009 Motorcycle(s): 2008 Can Am Spyder PE #1344 / 2009 Kawi KLX140L Monster Energy / 2009 Kawi Ninja 250R (RIP 8.23.09) Posts: 586
|
Quote:
__________________________________________________
Feel free to look me up on facebook. |
|
![]() |
![]() |
![]() |
#38 |
ninjette.org sage
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914
|
^ I like that idea as well...but what about just the Ninjette.org, without a background?
|
![]() |
![]() |
![]() |
#39 |
3 for street, 2 for dirt
Name: Katlyn
Location: San Francisco Bay Area (California)
Join Date: Mar 2009 Motorcycle(s): 2008 Can Am Spyder PE #1344 / 2009 Kawi KLX140L Monster Energy / 2009 Kawi Ninja 250R (RIP 8.23.09) Posts: 586
|
I think that's the idea.
__________________________________________________
Feel free to look me up on facebook. |
![]() |
![]() |
![]() |
#40 | ||
ninjette.org certified postwhore
Name: Michael
Location: Southern NM
Join Date: Feb 2009 Motorcycle(s): '91 Honda CBR600 F2 Posts: A lot.
|
Quote:
![]() ![]() ![]() Quote:
![]() Anybody else have possibilities?
__________________________________________________
1991 Honda CBR600 F2, White/Gray, D&D slip-on exhaust, tail integrator, gel grips, Custom undertail. |
||
![]() |
![]() |
![]() |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ninjette.org decal / patch ??? What do you think | Klondike1020 | Forum Information | 15 | September 9th, 2012 03:19 PM |
Ninjette.org Decal Contest! (Official Entry Thread) | Alex | Forum Information | 25 | October 6th, 2010 07:18 PM |
Ninjette decal design contest reminder: | Verus Cidere | General Motorcycling Discussion | 0 | July 24th, 2009 11:16 AM |
Ninjette.org decal anyone? (Increase your aerodynamics!) | 00v_Lucky | Forum Information | 32 | March 25th, 2009 09:07 AM |
Ninjette.org Logo Discussion Thread | Alex | Forum Information | 89 | February 16th, 2009 04:06 PM |
|
|