June 17th, 2013, 08:34 AM | #81 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I like the VZ 21. Not only is the map perfect but it has all the repair parts available.
Are you water cooling the turbo? I only think of power in 6th gear. With 50 HP the 14000 will come very quick below fifth gear.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
June 17th, 2013, 09:04 AM | #82 |
ninjette.org member
Name: Brahmantio
Location: Jakarta
Join Date: Dec 2008 Motorcycle(s): N250R Posts: 101
|
no water cooling just oil cooled and lubrication
|
|
June 17th, 2013, 09:07 AM | #83 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
That's all you need. But there is a water pipe available.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
June 21st, 2013, 11:28 PM | #84 |
Guest
Posts: n/a
|
I just can't wait for this to be released! I love the 300, but I really just want a bit more power out of it, and this will be absolutely perfect for me.
I have just a few questions: 1. I believe this has been answered in other forums (possibly even this one, but forgive me if I missed that bit of info), but how much do you think this kit will cost? 2. Do you have any sort of time frame for release, even a wild guess? 3. Will you be able to put together a detailed video and/or a detailed set of instructions for putting all of this together for the non-mechanically inclined riders such as myself? I have a shop that I could take it to, but I much rather put it on myself if had a nice set of instructions I can pretty much guarantee that the second this is put up for sale, I will be picking one up EDIT: One more question. I have been wondering this since I saw the first video, but is the speedometer in KMH or MPH (probably a stupid question, but just want to be sure)? Also, what is the anticipated top speed of the bike in real world situations? Thanks! |
|
June 22nd, 2013, 02:06 AM | #85 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
A 250/300 ninja with an average size rider should hit 120 mph in a mile with 40 HP.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
June 22nd, 2013, 01:45 PM | #86 |
Simple kind of man
Name: Ryan
Location: Stuttgart, Germany
Join Date: Apr 2013 Motorcycle(s): 2013 Ninja 300 Posts: 133
|
Get the setup ready for production and sell it, I'm waiting to buy.
I just need a kit that will be capable of 50+ with custom tunes/boost.
__________________________________________________
|
|
June 23rd, 2013, 06:07 AM | #87 | |
ninjette.org member
Name: Brahmantio
Location: Jakarta
Join Date: Dec 2008 Motorcycle(s): N250R Posts: 101
|
Quote:
and our speedometer is in KMH |
|
1 out of 1 members found this post helpful. |
June 23rd, 2013, 06:10 AM | #88 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
Looking forward to your progress. 200 kph is 125 mph.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
June 23rd, 2013, 06:22 AM | #89 |
ninjette.org member
Name: Brahmantio
Location: Jakarta
Join Date: Dec 2008 Motorcycle(s): N250R Posts: 101
|
|
|
June 23rd, 2013, 08:13 AM | #90 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
NICE !
A water to air intercooler. The race bikes use them with ice water in the gas tank.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
June 24th, 2013, 10:27 AM | #91 |
Simple kind of man
Name: Ryan
Location: Stuttgart, Germany
Join Date: Apr 2013 Motorcycle(s): 2013 Ninja 300 Posts: 133
|
Going to offer a kit without the intercooler?
Any data logging to show the benefits of your intercooler?
__________________________________________________
|
|
June 24th, 2013, 06:10 PM | #92 |
ninjette.org sage
Name: L
Location: WI
Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709
|
water 2 air ic, sweet!
__________________________________________________
Mods: 636 front suspension conversion, wc clip ons, bohemian rear sets, FP jets, k&n filter, and AP full race exhaust |
|
July 16th, 2013, 10:08 AM | #93 |
ninjette.org newbie
Name: Bob
Location: Texas
Join Date: Oct 2012 Motorcycle(s): 300 Posts: 1
|
Very interested as well! Was looking into custom fabbing a Turbo setup for my 300. I'd love to pick one of these up!
|
|
July 16th, 2013, 11:49 PM | #94 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
i would like to see a dyno sheet of this...
|
|
July 17th, 2013, 07:13 AM | #95 |
ninjette.org member
Name: Brahmantio
Location: Jakarta
Join Date: Dec 2008 Motorcycle(s): N250R Posts: 101
|
|
|
July 18th, 2013, 06:12 AM | #96 |
ninjette.org member
Name: Brahmantio
Location: Jakarta
Join Date: Dec 2008 Motorcycle(s): N250R Posts: 101
|
street riding video- sorry bad traffic
|
|
July 18th, 2013, 06:42 AM | #97 |
Simple kind of man
Name: Ryan
Location: Stuttgart, Germany
Join Date: Apr 2013 Motorcycle(s): 2013 Ninja 300 Posts: 133
|
awesome clip.
__________________________________________________
|
|
September 18th, 2013, 01:26 PM | #98 |
ninjette.org newbie
Name: Jason
Location: Waco area
Join Date: Sep 2013 Motorcycle(s): Ninja ZX3R Posts: 1
|
A water to air intercooler would be insanely impractical, costly and overly complex with no real gains to be had whatsoever.
With such low boost levels a simple small AIR/AIR intercooler is that would ever be needed. |
|
September 19th, 2013, 03:01 PM | #99 |
ninjette.org member
Name: jet
Location: oz
Join Date: Sep 2012 Motorcycle(s): zzr250 gt650r zxr250 ninja 300 Posts: 114
|
i agree, air/air would be much more practical
|
|
September 20th, 2013, 09:40 AM | #100 | |
dirty boy
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot.
MOTM - Apr '14
|
Quote:
If that is the case at 7krpm the boost has not hit yet right? but the chart is still showing pretty significant torque and hp numbers. Tell me I am missing something. Has there been any rough estimates on pricing for this kit yet? $500? $1000? more? Does it include EFI kit, or just turbo components? As much as I am all about tweaking out small displacement bikes and getting them to haul *** I question the actual usefulness of this outside of drag/landspeed racing. Seems like a lot of work trying to polish a turd so to speak. I don't necessarily think the 250 is a turd but putting a turbo on a stock ninja 250 seems like the American approach to sports cars. "HEY!! lets put the biggest engine we can fit into it so it makes tons of unusable torque and completely neglect suspension, brakes and general handling so we can offer it at a low cost" could be i'm getting old and grumpy but at some point I feel like you have to draw a line and say... ya know what, I can just buy a different bike that has comparable or more HP than the turbo offers but in turn also get better suspension, brakes ect... at a similar cost and with no work on my part or chance of me totally efing everything up. ok ok so I see this coming (you are missing the point! I want the fastest most tricked out ninja 250 on the west coast, I don't care about other bikes) but I do get it and unfortunately it's just not worth it IMO. I see regret in your future. (I guess i'm Debbie downer today WTF? )
__________________________________________________
I love the smell of burning pre-mix in the morning I don't think I'm a lot dumber than you thought that I think that I thought I was once. |
|
|
September 20th, 2013, 11:56 AM | #101 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
^^ I see where you're coming from. They should make cartridge drop-ins, Ohlins shock, SS lines, Vesrah pads, Tapered head bearings, 420 chain conversion, and DRII's part of that kit as well. Race bike in a box, forget the turbo
|
1 out of 1 members found this post helpful. |
February 23rd, 2014, 10:12 PM | #102 |
ninjette.org member
Name: Arno
Location: New Zealand
Join Date: Feb 2014 Motorcycle(s): CharlesdiubsOB Posts: 12
|
so has there been any progress on this kit so far ?
|
|
May 13th, 2014, 12:40 PM | #103 |
ninjette.org newbie
Name: Dom
Location: Ottawa, On
Join Date: May 2014 Motorcycle(s): Ninja 300 2014 Posts: 9
|
Same Here, looking to custom fab a Turbo Kit, had experience on custom fab a Skidoo 4stroke 1200 and installed a twin on a 5.0 Mustang...
So anyone else thinking about doing this? |
|
May 13th, 2014, 01:30 PM | #104 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I am in the middle of one. It's on hold for a couple months as I develop my fuel injected nitrous bike.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
May 13th, 2014, 01:53 PM | #105 |
ninjette.org newbie
Name: Dom
Location: Ottawa, On
Join Date: May 2014 Motorcycle(s): Ninja 300 2014 Posts: 9
|
What are you using as a Turbo?
What are you plan on lowering down CR? I was thinking of a thicker head gasket (That what we did on the 1200 skidoo) Fuel Management? Bigger Injectors? Thanks |
|
May 13th, 2014, 04:45 PM | #106 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I am using the VZ 21 turbo. You can use thick gaskets to lower compression. But you need forged pistons. Wossner or JE will make anything you need. Either way you will need to deal with changing cam timing.
I addition to the turbo I am using Ecotrons fuel injection system. I am building a turbo with low boost. Under 7 psi and using high compression. This is an all out race engine not for the street.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
May 14th, 2014, 06:37 AM | #107 |
ninjette.org newbie
Name: Dom
Location: Ottawa, On
Join Date: May 2014 Motorcycle(s): Ninja 300 2014 Posts: 9
|
Well as far as timing, those guys sell adjustable cam sproket
http://ape-store.com/shopsite/page34.html 250 are the same as the 300 as per kawa EPC |
|
May 14th, 2014, 07:09 AM | #108 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I think the gears come from a 900 actually. But you can also slot the holes. It's knowing how much the change that is the key.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
May 14th, 2014, 05:49 PM | #109 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Listen to Eric
|
|
August 25th, 2014, 08:37 AM | #110 |
ninjette.org member
Name: Garrett
Location: Illinois - Midwest USA
Join Date: Jul 2013 Motorcycle(s): ZX-3R (ok, ex300) Posts: 160
|
any update on this turbo kit?
|
|
October 16th, 2014, 04:54 PM | #111 |
ninjette.org member
Name: Michael
Location: Tehachapi, CA
Join Date: Oct 2014 Motorcycle(s): 2014 Ninja 300 Posts: 160
|
Interested in an update aswell. I have to let you know however, the cam sprockets mentioned are discontinued and they are most definatly not from a 900. They ONLY fit Newgen 250s and 300s. The ones we made were specifically designed for the 250. Not enough interest to sell enough of them to keep them in production.
|
|
October 16th, 2014, 07:37 PM | #112 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
That is really a shame. I need two sets
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
October 17th, 2014, 02:12 PM | #113 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
All this talk of turbos
__________________________________________________
|
|
October 26th, 2014, 01:58 PM | #114 |
KAWASAKI GURU
Name: Shawn
Location: Florida
Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863
|
|
1 out of 1 members found this post helpful. |
October 26th, 2014, 02:42 PM | #115 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
You better check wheel clearance and oil drain back. I had that exact placement and it was to low
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
October 26th, 2014, 02:43 PM | #116 |
KAWASAKI GURU
Name: Shawn
Location: Florida
Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863
|
going to check the wheel tomorrow, as for drainage I will run a pump if needed.
|
|
October 26th, 2014, 02:53 PM | #117 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I think there is a way to run oil pressure from the engine and an evacuation pump to put the oil back into the sump. The oil is is the only thing I have left to do. I plan to run back to the clutch cover and pull oil from the pressure tap on the block.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
October 26th, 2014, 02:53 PM | #118 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
One more thing. What does your exhaust flange look like?
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
October 26th, 2014, 02:57 PM | #119 |
KAWASAKI GURU
Name: Shawn
Location: Florida
Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863
|
yeah exactly, you can pull oil from the galley plug on the right side of the motor or from the banjo bolt on the head. I have the adapter for both but will probably run it from the galley I think it was a 18mm plug or so but I have an adapter to give me a 4AN fitting.... from there I will actually try to return the oil back threw another banjo type fitting to one of the oil drain plugs and if I need it I will run a scavenge pump down low. The turbo won't be above the oil level line so it should work out. I'll know in about a week :-)
|
|
October 26th, 2014, 02:59 PM | #120 |
KAWASAKI GURU
Name: Shawn
Location: Florida
Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[motorcycle.com] - Suzuki Patents Recursion Concepts Turbocharger Design | Ninjette Newsbot | Motorcycling News | 0 | March 26th, 2015 01:30 PM |
SPORTISI X-Race Predator Rearset 2008 - 2012 Ninja 250R | bnj999 | Motorcycle-related | 4 | September 9th, 2014 09:44 AM |
turbo / turbocharger / turbocharging | Lowspeed Lowside | 2008 - 2012 Ninja 250R Tech Talk | 282 | September 14th, 2012 09:28 PM |
|
|