December 29th, 2014, 01:19 AM | #1 |
ninjette.org newbie
Name: Igor
Location: Sydney Australia
Join Date: Apr 2012 Motorcycle(s): Ninja 250r 2012 Posts: 5
|
Oil filter o-ring different sizes??
Hi guys, got a bit confused about subject. I have 3yo ninja, all this time I`ve changed oil myself, and everytime I bought oil filter and o-rings from the shop I got my bike-original Kawasaki parts. Last time I decided to save some money and got I think Emgo filter and o-rings. When I started fitting I found out the big o-ring is much thicker then original . Original is about 2.5 mm, and Emgo was 4 mm. Original just slips in a channel, Emgo doesn`t want to go in.Is it normal to have o-ring this thick? I re-used old one, but not sure -for next oil change I would like to get K&N set from ebay- what o-rings they have?Thanks.
|
|
December 29th, 2014, 01:28 AM | #2 |
Down Under
Name: Linkin
Location: Sydney, Australia
Join Date: Jun 2014 Motorcycle(s): Kawasaki ZXR250C Ninja Posts: 296
|
I bought a box of goodies from Motorcycle Superstore including a K&N 401 which came with the correct o-ring. Just get the K&N part, can't go wrong really.
Which oil are you planning on using? For my next oil change I'll be using Delo 400 (for diesel engines mainly but suitable for bikes & wet clutches) |
|
December 29th, 2014, 01:37 AM | #3 |
ninjette.org newbie
Name: Igor
Location: Sydney Australia
Join Date: Apr 2012 Motorcycle(s): Ninja 250r 2012 Posts: 5
|
Linkin-thanks for replay) I`m using Delo 2 oil changes already- very happy with it. Gear changes so much smoother then with motul.
|
|
December 30th, 2014, 12:36 PM | #4 |
ninjette.org sage
Name: -
Location: somewhere cold
Join Date: Jun 2013 Motorcycle(s): 2010 Ninja 250 Posts: 596
Blog Entries: 1
|
The K&N 401 kit comes with the correct o-ring, but there have been a quite few kits circulating around that have o-rings that don't fit. Try the WIX filter.
|
|
December 31st, 2014, 06:18 AM | #5 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
All my filters came with the O-Ring, but I just get the Kawasaki filter.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil filter crosses over with Honda filter | smokinsingle | 2008 - 2012 Ninja 250R Tech Talk | 4 | April 19th, 2014 08:47 AM |
Mystery o-ring on oil screen? | chadh92 | 1986 - 2007 Ninja 250R Tech Talk | 12 | May 17th, 2013 04:16 PM |
Loss of oil and Air filter soaked in Oil | 08ninja250 | 2008 - 2012 Ninja 250R Tech Talk | 19 | August 9th, 2010 05:35 PM |
change oil filter, without draining oil? | peter330 | 2008 - 2012 Ninja 250R Tech Talk | 5 | May 30th, 2010 01:08 PM |
|
|