ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Notices

Reply
 
Thread Tools
Old May 12th, 2018, 08:02 AM   #1
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Hot Bodies Race Fairings

new in box, still in primer (no tail)

race upper
race lower
race front wheel

I was going to mount the front and cut it for headlight, but found a decent condition replacement set and went with that just to get back to riding instead of constantly on jack stands. I used the rear tail...I'd be willing to part with it if you have a complete OEM black or red rear tail setup to swap me. the race tail is cut for OEM tail light and already trimmed for bolt on fitment. The other pieces were unboxed once and put back in...they will require minor cut/trim to fit each bike.

new MSRP was 699 plus the shipping.
looking to get 250 for the panels I have, or same with trade.

this is how the tail looks with a couple hours of fitment dialing in. takes some patience, but these are nice pieces
Attached Images
File Type: jpg IMG_0179.jpg (226.4 KB, 31 views)
95PGTTech is offline   Reply With Quote




Old May 12th, 2018, 08:03 AM   #2
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
I forgot to mention...in case the thread does not send me a notification, email me directly to contact me:

chris.reiser.rn@gmail.com

Thanks
95PGTTech is offline   Reply With Quote


Old May 21st, 2018, 10:13 AM   #3
GeicoGecko
ninjette.org newbie
 
Name: Adam
Location: Olathe, KS
Join Date: Apr 2017

Motorcycle(s): EX300B, TL1000R, R6, GSXR1000

Posts: 2
Interested, sent you an email.
GeicoGecko is offline   Reply With Quote


Old May 21st, 2018, 10:29 AM   #4
adouglas
Cat herder
 
adouglas's Avatar
 
Name: Gort
Location: A secret lair which, being secret, has an undisclosed location
Join Date: May 2009

Motorcycle(s): 2012 Triumph Street Triple R (street), 2006 Yamaha R6 (track)

Posts: A lot.
Blog Entries: 6
MOTM - Jul '18, Nov '16, Aug '14, May '13
Adam, if this falls through another member ( @Bigballsofpaint ) is also selling some newgen 250 race glass.
.
__________________________________________________
I am NOT an adrenaline junkie, I'm a skill junkie. - csmith12

Nam et ipsa scientia potestas est.
Heri historia. Cras mysterium. Hodie donum est. Carpe diem.
adouglas is offline   Reply With Quote


Old May 21st, 2018, 11:07 AM   #5
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
I forgot to mention that I also have the race front fairing stay that I will include with purchase. It’s an aluminum lightweight unit that is also brand new in box
95PGTTech is offline   Reply With Quote


Old May 21st, 2018, 05:06 PM   #6
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Still available he needs 13-18 Ninja 300

Some pics for you guys
95PGTTech is offline   Reply With Quote


Old May 30th, 2018, 03:03 PM   #7
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Bump
95PGTTech is offline   Reply With Quote


Old June 7th, 2018, 05:39 AM   #8
Ducati999
ninjette.org certified postwhore
 
Name: Ant
Location: Wooster
Join Date: Dec 2013

Motorcycle(s): Ducati 999 2012 Ninja 250r Ducati748 Yellow finally running 2003 SV650 S (SOLD)

Posts: A lot.
The "race fairing front stay" you have, that is to remove the headlight correct? Will it allow mounting of the gauges? My wife is converting her 250 into track only so this would be perfect.
Ducati999 is offline   Reply With Quote


Old June 7th, 2018, 06:07 AM   #9
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Yes the fairing stay (bracket) is the first picture in post 6. It bolts to the steering stem then the new nose/front race fairing. The race fairing has no cutout for a headlight as it is a race fairing. Most people just zip tie the stock cluster to this fairing stay until they can afford to purchase a Koso or other cluster
95PGTTech is offline   Reply With Quote


Old June 21st, 2018, 03:22 AM   #10
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Bump
95PGTTech is offline   Reply With Quote


Old June 22nd, 2018, 08:04 PM   #11
cbinker
Track Clown
 
cbinker's Avatar
 
Name: Chris
Location: Kingman, AZ
Join Date: May 2012

Motorcycle(s): '08 250R, '15 TTR-125, SV650 Racer

Posts: A lot.
MOTM - Sep '15
is that front fairing stay for the 250R? and is it still available?
__________________________________________________

TEAM ALFALFA
Unregistered swallows.
cbinker is offline   Reply With Quote


Old June 22nd, 2018, 09:48 PM   #12
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Yes and yea
95PGTTech is offline   Reply With Quote


Old June 26th, 2018, 01:15 PM   #13
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
bump
95PGTTech is offline   Reply With Quote


Old May 14th, 2019, 02:47 PM   #14
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Bump
95PGTTech is offline   Reply With Quote


Old June 17th, 2019, 09:22 PM   #15
Jackulous
ninjette.org newbie
 
Name: Nick
Location: Austin, Tx Area
Join Date: Jun 2019

Motorcycle(s): 2008 Kawi Ninja 250r, 2013 Ducati 848 evo

Posts: 7
did this sell?
Jackulous is offline   Reply With Quote


Old June 18th, 2019, 06:29 AM   #16
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Still have them, got bored and mounted them to bike so now holes are drilled nice fitment. Also reinforced all holes with aluminum backer. Drilled hole for single round street headlight, easily reversible I kept the cutout. Let me know if you want pics
95PGTTech is offline   Reply With Quote


Old June 18th, 2019, 06:47 AM   #17
Jackulous
ninjette.org newbie
 
Name: Nick
Location: Austin, Tx Area
Join Date: Jun 2019

Motorcycle(s): 2008 Kawi Ninja 250r, 2013 Ducati 848 evo

Posts: 7
Quote:
Originally Posted by 95PGTTech View Post
Still have them, got bored and mounted them to bike so now holes are drilled nice fitment. Also reinforced all holes with aluminum backer. Drilled hole for single round street headlight, easily reversible I kept the cutout. Let me know if you want pics

yeah man def interested.
Jackulous is offline   Reply With Quote


Old June 18th, 2019, 08:02 AM   #18
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
I have not mounted the belly pan yet but test fitted it, fits nice how I have the main fairing done. The headlight “bucket” is detachable. I kept the cutout so it could be re glassed closed quickly and made this plexiglass cover for it for street use. The headlight bucket and projector headlight would be included in sale

The rx2n knockoff cluster and the wiring (plug and play) could be included along with the mount to the headlight fairing bracket at additional cost
Attached Images
File Type: jpg EA7BC0BB-5D76-44C8-A378-3E7E24008522.jpg (91.1 KB, 3 views)
File Type: jpg 38760127-51BA-47D2-AE4F-7BE62C912D4D.jpg (81.9 KB, 3 views)
95PGTTech is offline   Reply With Quote


Old June 18th, 2019, 04:21 PM   #19
Jackulous
ninjette.org newbie
 
Name: Nick
Location: Austin, Tx Area
Join Date: Jun 2019

Motorcycle(s): 2008 Kawi Ninja 250r, 2013 Ducati 848 evo

Posts: 7
where are you located and what are you thinking shipping would be to 78620?



Quote:
Originally Posted by 95PGTTech View Post
I have not mounted the belly pan yet but test fitted it, fits nice how I have the main fairing done. The headlight “bucket” is detachable. I kept the cutout so it could be re glassed closed quickly and made this plexiglass cover for it for street use. The headlight bucket and projector headlight would be included in sale

The rx2n knockoff cluster and the wiring (plug and play) could be included along with the mount to the headlight fairing bracket at additional cost
Jackulous is offline   Reply With Quote


Old June 18th, 2019, 06:04 PM   #20
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Quote:
Originally Posted by Jackulous View Post
where are you located and what are you thinking shipping would be to 78620?
NJ

Most of the quotes I have gotten people are $150 to $250. You get hammered in dimensional weight

edit: Box is 22x23x40. Weight is about 10lbs, but dimensional weight really increases that. I could probably cut the box down a few inches in each direction since no tail, but not sure that's worth compromising the contents over. fiberglass in shipping needs a lot of packing material

Last futzed with by 95PGTTech; June 19th, 2019 at 12:22 PM.
95PGTTech is offline   Reply With Quote


Old June 18th, 2019, 08:04 PM   #21
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer, Ninja250R street bike, EX250F#1, EX250F#2, VF500F, CBR600RR

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Here's a great way to ship large packages: http://busfreighter.com
Only catch is it's not door-to-door; have to go pick up at bus station.
I recently shipped 4x BBS race-wheels and 6x tyres cross-country for $156.

DannoXYZ is offline   Reply With Quote


Old June 19th, 2019, 12:25 PM   #22
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Quote:
Originally Posted by DannoXYZ View Post
Here's a great way to ship large packages: http://busfreighter.com
Only catch is it's not door-to-door; have to go pick up at bus station.
I recently shipped 4x BBS race-wheels and 6x tyres cross-country for $156.

thanks, they were MUCH more competitive than USPS/Fedex/UPS. a bit cheaper than greyhound but not sure if I'm using their site right. uship.com is hit or miss because people bid on it, you can't really get a quote.

I'd imagine Hot Bodies has some sort of commercial account (it shipped fedex) where they get massive discounts for a high volume of shipments with them. I can't see them eating $150/set.
95PGTTech is offline   Reply With Quote


Old June 20th, 2019, 12:56 PM   #23
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 102
Sold
95PGTTech is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
08-12 Ninja 250 Hot bodies fairings Bigballsofpaint Motorcycle-related 8 July 9th, 2018 05:14 PM
for those with the hot bodies undertail greatwhiteninja 2008 - 2012 Ninja 250R Farkles 8 October 7th, 2011 02:21 PM
Hot bodies under tail install Highalltheway 2008 - 2012 Ninja 250R Tech Talk 8 August 16th, 2011 03:01 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 05:57 AM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2019 ninjette.org, All rights reserved.