ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Notices

Reply
 
Thread Tools
Old May 12th, 2018, 08:02 AM   #1
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
Hot Bodies Race Fairings

new in box, still in primer (no tail)

race upper
race lower
race front wheel

I was going to mount the front and cut it for headlight, but found a decent condition replacement set and went with that just to get back to riding instead of constantly on jack stands. I used the rear tail...I'd be willing to part with it if you have a complete OEM black or red rear tail setup to swap me. the race tail is cut for OEM tail light and already trimmed for bolt on fitment. The other pieces were unboxed once and put back in...they will require minor cut/trim to fit each bike.

new MSRP was 699 plus the shipping.
looking to get 250 for the panels I have, or same with trade.

this is how the tail looks with a couple hours of fitment dialing in. takes some patience, but these are nice pieces
Attached Images
File Type: jpg IMG_0179.jpg (226.4 KB, 20 views)
95PGTTech is online now   Reply With Quote




Old May 12th, 2018, 08:03 AM   #2
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
I forgot to mention...in case the thread does not send me a notification, email me directly to contact me:

chris.reiser.rn@gmail.com

Thanks
95PGTTech is online now   Reply With Quote


Old May 21st, 2018, 10:13 AM   #3
GeicoGecko
ninjette.org newbie
 
Name: Adam
Location: Olathe, KS
Join Date: Apr 2017

Motorcycle(s): EX300B, TL1000R, R6, GSXR1000

Posts: 2
Interested, sent you an email.
GeicoGecko is offline   Reply With Quote


Old May 21st, 2018, 10:29 AM   #4
adouglas
Cat herder
 
adouglas's Avatar
 
Name: Gort
Location: A secret lair which, being secret, has an undisclosed location
Join Date: May 2009

Motorcycle(s): 2012 Triumph Street Triple R (street), 2006 Yamaha R6 (track)

Posts: A lot.
Blog Entries: 6
MOTM - Jul '18, Nov '16, Aug '14, May '13
Adam, if this falls through another member ( @Bigballsofpaint ) is also selling some newgen 250 race glass.
.
__________________________________________________
I am NOT an adrenaline junkie, I'm a skill junkie. - csmith12

Nam et ipsa scientia potestas est.
Heri historia. Cras mysterium. Hodie donum est. Carpe diem.
adouglas is offline   Reply With Quote


Old May 21st, 2018, 11:07 AM   #5
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
I forgot to mention that I also have the race front fairing stay that I will include with purchase. It’s an aluminum lightweight unit that is also brand new in box
95PGTTech is online now   Reply With Quote


Old May 21st, 2018, 05:06 PM   #6
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
Still available he needs 13-18 Ninja 300

Some pics for you guys
95PGTTech is online now   Reply With Quote


Old May 30th, 2018, 03:03 PM   #7
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
Bump
95PGTTech is online now   Reply With Quote


Old June 7th, 2018, 05:39 AM   #8
Ducati999
ninjette.org sage
 
Name: Ant
Location: Wooster
Join Date: Dec 2013

Motorcycle(s): Ducati 999 2012 Ninja 250r Ducati748 Yellow finally running 2003 SV650 S (SOLD)

Posts: 977
The "race fairing front stay" you have, that is to remove the headlight correct? Will it allow mounting of the gauges? My wife is converting her 250 into track only so this would be perfect.
Ducati999 is offline   Reply With Quote


Old June 7th, 2018, 06:07 AM   #9
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
Yes the fairing stay (bracket) is the first picture in post 6. It bolts to the steering stem then the new nose/front race fairing. The race fairing has no cutout for a headlight as it is a race fairing. Most people just zip tie the stock cluster to this fairing stay until they can afford to purchase a Koso or other cluster
95PGTTech is online now   Reply With Quote


Old June 21st, 2018, 03:22 AM   #10
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
Bump
95PGTTech is online now   Reply With Quote


Old June 22nd, 2018, 08:04 PM   #11
cbinker
Track Clown
 
cbinker's Avatar
 
Name: Chris
Location: Kingman, AZ
Join Date: May 2012

Motorcycle(s): '08 250R, '15 TTR-125, SV650 Racer

Posts: A lot.
MOTM - Sep '15
is that front fairing stay for the 250R? and is it still available?
__________________________________________________

TEAM ALFALFA
Unregistered swallows.
cbinker is offline   Reply With Quote


Old June 22nd, 2018, 09:48 PM   #12
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
Yes and yea
95PGTTech is online now   Reply With Quote


Old June 26th, 2018, 01:15 PM   #13
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
bump
95PGTTech is online now   Reply With Quote


Old May 14th, 2019, 02:47 PM   #14
95PGTTech
ninjette.org member
 
Name: Chris
Location: Bordentown, NJ
Join Date: Jun 2015

Motorcycle(s): 2008 Ninja 250R

Posts: 85
Bump
95PGTTech is online now   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
08-12 Ninja 250 Hot bodies fairings Bigballsofpaint Motorcycle-related 8 July 9th, 2018 05:14 PM
for those with the hot bodies undertail greatwhiteninja 2008 - 2012 Ninja 250R Farkles 8 October 7th, 2011 02:21 PM
Hot bodies under tail install Highalltheway 2008 - 2012 Ninja 250R Tech Talk 8 August 16th, 2011 03:01 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 05:58 PM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2016 ninjette.org, All rights reserved.