January 14th, 2010, 07:48 AM | #1 |
***
Name: Ingersoll
Location: South Carolina
Join Date: Jan 2010 Motorcycle(s): ... Posts: 5
|
Help with adjusting the values
I was wanting to know if you guys could give me a heads up for adjusting the values, by letting me know what tools are need. I got some basic skills but not a lot of tools. Thanks
|
|
January 14th, 2010, 08:05 AM | #2 |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
http://www.ninjette.org/forums/showthread.php?t=9924
Based on the pics and just knowing the bike, I'd say a set of metric hex wrenches, standard screwdrivers, a set of metric sockets, a micrometer and a good bit of patience.
__________________________________________________
Proud member of the Blue Army |
|
January 14th, 2010, 08:08 AM | #3 |
ninjette.org certified postwhore
Name: Travis
Location: Warwick, RI
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250R Posts: A lot.
|
The bear minimum tools. Torque wrench, Socket set, Feeler guages, Micrometer, Medium size flat head screwdriver, A very small flat head screw driver and a coin to take off the cap to spin the drive train. (allen wrenches and a phillips screwdriver to take off plastics).
I used a 1/4 harbor freight torque wrench I dont remember the inch pound ranges off the top of my head, they are in the service manual. I also strongly recommend having a Flashlight, Needle-nose pliers and a Breaker bar. Also a magnetic wand can come in handy when removing the shims if your lash is out of spec. Check out the DIYs that Vex Did: http://www.ninjette.org/forums/showthread.php?t=9787 http://www.ninjette.org/forums/showt...justing+valves
__________________________________________________
Addicted to anything that has an engine and rolls. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Torque values for areap 12' ? | Jason5885 | 2008 - 2012 Ninja 250R Tech Talk | 10 | January 7th, 2015 11:06 AM |
[motorcyclistonline] - Club Racing, Family Values | MEGAPHONE | Ninjette Newsbot | Motorcycling News | 0 | December 8th, 2014 02:20 PM |
Blue Book Values | Kokosun | General Motorcycling Discussion | 4 | November 4th, 2013 12:20 AM |
Need rearset torque values | Kitdog | 2008 - 2012 Ninja 250R Tech Talk | 5 | August 2nd, 2010 10:26 AM |
Used Bike Values from MCN | g21-30 | General Motorcycling Discussion | 25 | October 29th, 2009 07:50 AM |
|
|