August 26th, 2013, 05:10 PM | #1 |
ninjette.org certified postwhore
Name: Justin
Location: Florida
Join Date: Aug 2012 Motorcycle(s): Ninja 250 2001 Posts: A lot.
|
Rear Axle Size
Anyone know the size of the rear axle? I just need the diameter thank you!
__________________________________________________
Mods: Offset clutch pressure plate |
|
August 26th, 2013, 05:40 PM | #2 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
For the old gen:
Both bearings (6203 and 6303) have interior diameter of 17 mm. The thread is M16.
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
1 out of 1 members found this post helpful. |
August 26th, 2020, 06:07 PM | #3 | |
ninjette.org member
Name: Arthur
Location: Sammamish , WA
Join Date: Jun 2020 Motorcycle(s): 2008 Ninja EX250J; 2005 CBR1000RR Posts: 108
|
Quote:
I measured it using a pair of calipers and it looks like it's 17mm but I cannot find any documentation that can confirm this.
__________________________________________________
2 Wheelers: 2008 Ninja 250R; 2005 CBR1000RR 4 Wheelers: 2018 M3; 2015 M235xi |
|
|
August 26th, 2020, 06:35 PM | #4 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
If you measured it and it was 17mm, then why not trust that? It makes sense that the shank is 17mm to fit the bearing IDs, and the thread M16. What does the caliper read if you measure the outside diameter of the threads?
|
|
August 26th, 2020, 09:08 PM | #5 |
ninjette.org member
Name: Arthur
Location: Sammamish , WA
Join Date: Jun 2020 Motorcycle(s): 2008 Ninja EX250J; 2005 CBR1000RR Posts: 108
|
Outside is like 17.01 - 17.03mm
__________________________________________________
2 Wheelers: 2008 Ninja 250R; 2005 CBR1000RR 4 Wheelers: 2018 M3; 2015 M235xi |
1 out of 1 members found this post helpful. |
August 27th, 2020, 01:12 AM | #6 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
That’s correct. I just measure mine last month to have titanium one made.
|
1 out of 1 members found this post helpful. |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear Axle Assembly. | N-m | 1986 - 2007 Ninja 250R Tech Talk | 2 | June 25th, 2014 04:08 PM |
rear axle torque | sparkplug896 | 1986 - 2007 Ninja 250R Tech Talk | 10 | December 20th, 2013 03:41 AM |
Anyone got a hitch pin clip size for the front axle? | BlackNinja | 2008 - 2012 Ninja 250R Farkles | 1 | July 27th, 2011 11:45 PM |
Rear axle question | Jordan91 | 2008 - 2012 Ninja 250R Tech Talk | 2 | December 29th, 2010 02:34 PM |
rear axle lube? | Buffalony | 2008 - 2012 Ninja 250R Tech Talk | 8 | June 3rd, 2010 09:04 AM |
|
|