ninjette.org

Go Back   ninjette.org > General > General Motorcycling Discussion

Notices

Reply
 
Thread Tools
Old May 9th, 2018, 05:28 AM   #41
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
This is just awesome stuff. I love it.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote




Old May 9th, 2018, 05:52 AM   #42
CynicalC
ninjette.org certified postwhore
 
CynicalC's Avatar
 
Name: Colin
Location: Bay Area
Join Date: Feb 2011

Motorcycle(s): '96 EX250

Posts: A lot.
Quote:
Originally Posted by steven moore View Post
Yes I do build all of my vehicles out of square tubing they hold up just fine for the purpose I built them. I'm confused about why you say that the bars holding the head are not finished by the seat? And despite what it looks like my rear bearings are not office chair quality, they are sealed bearings attached to a thick plate of steel, they're not going anywhere in a turn.
In the picture of the chain tensioner it looks unfinished. Good luck with your project.
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è.
CynicalC is offline   Reply With Quote


Old May 9th, 2018, 06:21 AM   #43
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
Thanks Racer x. CynicalC the chain tensioner is finished it's just a spring loaded bar with a longboard wheel on it I use them for a lot of projects they hold up pretty well as long as springs are sturdy. And I see what you mean about the bars underneath the seat I'm going to add a few more pieces of metal to strengthen the whole section up.
steven moore is offline   Reply With Quote


Old May 9th, 2018, 06:29 PM   #44
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
I added more bracing to the frame at the suggestion of observers on this awesome forum. that's okay needed to be done anyway and I took a picture of the inside of the tube to show how thick this tubing is it's not thin wall.
Attached Images
File Type: jpg 20180509_181347.jpg (141.3 KB, 7 views)
File Type: jpg 20180509_181612.jpg (80.2 KB, 6 views)
steven moore is offline   Reply With Quote


Old May 24th, 2018, 06:43 PM   #45
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
Ninja trike update

Been a while but finally got more parts and there for more work done. I mounted the original rear ninja caliper, master cylinder and overflow bottle for the radiator. Installed chain and started some wiring.
Attached Images
File Type: jpg 20180524_180513.jpg (143.9 KB, 7 views)
File Type: jpg 20180524_182435.jpg (124.1 KB, 6 views)
File Type: jpg 20180524_182804.jpg (164.3 KB, 6 views)
File Type: jpg 20180524_182744.jpg (116.4 KB, 5 views)
steven moore is offline   Reply With Quote


Old May 25th, 2018, 06:01 AM   #46
Burphel
ninjette.org member
 
Burphel's Avatar
 
Name: Brian
Location: NW USA
Join Date: Aug 2016

Motorcycle(s): Triumph Bonneville, Ninja 300

Posts: 204
I've never tried a trike, but I'd think you'd want a much beefier rear brake than the stock one. More rotating mass and weight distribution to the rear would make the rear brake much more effective, but also require more force. Between the light weight, low power, and budget-friendliness, our rear brake is damn near useless. If anything, I think I'd go on eBay and snag a stock front setup from a literbike to graft onto your rear. You'd need an extended hydraulic line, but you'd be wanting steel braided anyway.
__________________________________________________
Let he who has never re-used a crush washer cast the first stone...
Burphel is offline   Reply With Quote


Old May 25th, 2018, 06:05 AM   #47
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
That's probably the case I'll have to try it out and see what happens. funny thing is most of my custom motorcycles and stuff I don't even bother installing a rear brake because the front usually does the job but on the trike it's probably different
steven moore is offline   Reply With Quote


Old May 25th, 2018, 06:15 AM   #48
Burphel
ninjette.org member
 
Burphel's Avatar
 
Name: Brian
Location: NW USA
Join Date: Aug 2016

Motorcycle(s): Triumph Bonneville, Ninja 300

Posts: 204
Yeah, like I said, I've never ridden a trike. So I'm doing a whole lot of speculating here.

I'm sure the front will still get a lot of weight transferred to it during braking, which is what makes it effective. But I'm betting with a MC sized contact patch, even locking it up isn't going to bring all that weight to a stop in a reasonable distance.

If you had a differential, it might be cool to have independent rear brakes and have a skid-steering effect.
__________________________________________________
Let he who has never re-used a crush washer cast the first stone...
Burphel is offline   Reply With Quote


Old May 25th, 2018, 06:20 AM   #49
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
Yeah I've only ridden that regular motorcycle trike that was converted. Yeah I'm hoping the length of the trike will offset a couple of it's possible quirks. On the bright side if the rear brake doesn't lock up it'll never skid-steer LOL
steven moore is offline   Reply With Quote


Old May 25th, 2018, 06:23 AM   #50
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
Yeah I'm currently balls-deep in the middle of the wiring not the funnest job but since I kept the original harness all I have to do is extend most of it and I think we'll probably be okay I hope
steven moore is offline   Reply With Quote


Old May 25th, 2018, 06:32 AM   #51
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
Hey I got a wiring question out there for anybody who knows but if you have two wires that are identical in color even if they're multicolored can they be hooked together and ran to the same line or do they still need to be separate and why would they do that?
Attached Images
File Type: jpg 15272550801331860392540.jpg (98.2 KB, 5 views)
steven moore is offline   Reply With Quote


Old May 25th, 2018, 06:45 AM   #52
Triple Jim
Guy Who Enjoys Riding
 
Triple Jim's Avatar
 
Name: Jim
Location: North Carolina
Join Date: Jul 2016

Motorcycle(s): Ninja 250

Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
The wiring diagram for the motorcycle should answer that question.
Triple Jim is offline   Reply With Quote


Old May 25th, 2018, 07:53 AM   #53
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Pretty cool!
DannoXYZ is offline   Reply With Quote


Old May 25th, 2018, 01:28 PM   #54
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
What color ?
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old May 25th, 2018, 10:43 PM   #55
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
I was able to start it up an hour ago. Installed the clutch cable and hooked up the throttle, it runs just fine motor wise. Still got a lot of work to do before I can put it on the ground and drive it away. Will push tomorrow to finish wiring.
steven moore is offline   Reply With Quote


Old May 25th, 2018, 10:46 PM   #56
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
A word to the wise, don't hook up your starter solenoid backwards will cause you to chase down electrical Gremlins that don't exist... lol
steven moore is offline   Reply With Quote


Old May 26th, 2018, 09:18 AM   #57
Ducati999
ninjette.org certified postwhore
 
Name: Ant
Location: Wooster
Join Date: Dec 2013

Motorcycle(s): Ducati 999 2012 Ninja 250r Ducati748 Yellow finally running 2003 SV650 S (SOLD)

Posts: A lot.
@steven moore,
Really cool project! I just have a couple of questions for you. Will you be putting a smaller dia, higher ratio rear sprocket to compensate for the smaller rear tires? The 250 has a lowish top speed and cutting the tire size by more than 50% will cause the trike to top out at apprx 50mph. Second where are you planning on mounting the radiator? I only ask based on the location of your over flow catch, looks like it is planned to be behind the seat. Not criticizing just wondering if the seat will limit airflow and cooling. Finally, have you considered a basic limited slip rear to keep drive and braking forces to both tires while still allowing the rear tires to turn independently? PM me should you be interested in my design idea. You would not have to change much of what you have already built.


Keep up the great work

Ant
Ducati999 is offline   Reply With Quote


Old May 26th, 2018, 11:21 AM   #58
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
Sorry Ducati 999 I have figured out how to PM anybody yet. And yes I have changed the ratio for the rear sprocket I dropped it from a 45 to 30 hopefully that'll be enough. I'm not a hundred percent sure but no big deal to order a different size sprocket if it's not right on target. As far as the radiator location goes, I tried to get as much space in between the seat as possible and I am considering maybe building some ram air ducts to help out with air flow. I do a lot of freeway driving and Vegas has become very windy over the last few years for some reason that should help with some cross flow across the radiator. Lol, but we'll have to see how it performs.
steven moore is offline   Reply With Quote


Old May 26th, 2018, 11:26 AM   #59
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
I would not consider a differential unless I was installing a regular car motor on a trike. Unless you know somebody who makes a very small differential that could be used on a vehicle this size, the only option is a regular car differential and that is too much weight too heavy and would only consider it with the car motor
steven moore is offline   Reply With Quote


Old May 26th, 2018, 11:37 AM   #60
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
There are a lot of differentials and axle setups on ATV and side by side off road vehicles as well as racing go carts. But for practice purposes you are good with one wheel drive.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old May 26th, 2018, 11:53 AM   #61
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
Yeah I was poking around looking at differentials for ATVs and side-by-sides, most of them are shaft drive and it's difficult to find a chain drive. Northern Tool had a limited slip differential I believe it was fairly inexpensive but it was only good up to 10 horsepowerand but that's not going to work. The only downside to my trike having a split axle is, it's only one wheel drive. But it's not a thousand horsepower either. And there's quite a bit of weight on those wheels back there. Its not light and neither am i. It should work pretty well. I would love for it to have been a 2-wheel drive but a solid axle across the back won't turn for crap. The only reason that axles work on a regular off road 3 wheelers is because the wheels slide across the top of the ground and that works for off road, not so much for the street.
steven moore is offline   Reply With Quote


Old May 31st, 2018, 07:59 AM   #62
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
Does anybody know if the thermostat on the 250ninja has a ground? I marked all my wires and I know it has a temp sensor blade but I think there was a ground and I'm not sure.
Attached Images
File Type: jpg 20180531_075301.jpg (105.2 KB, 2 views)
steven moore is offline   Reply With Quote


Old May 31st, 2018, 08:01 AM   #63
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
I got most of the wiring done I couldn't figure out where to place the computer and CDI box so I decided to stuff inside of ammo box to clean it up a little bit and keep them safe.
Attached Images
File Type: jpg 15277788380151757326323.jpg (125.4 KB, 1 views)
steven moore is offline   Reply With Quote


Old May 31st, 2018, 08:12 AM   #64
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
I also figured out how to keep part of my Fairing and the windshield to keep the wind off me here's a rough cut pic of it
Attached Images
File Type: jpg 20180531_080926.jpg (104.8 KB, 4 views)
File Type: jpg 20180531_080934.jpg (102.2 KB, 3 views)
steven moore is offline   Reply With Quote


Old May 31st, 2018, 08:32 AM   #65
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
That's pretty cool! Should put tail section on too!
DannoXYZ is offline   Reply With Quote


Old May 31st, 2018, 08:35 AM   #66
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
It's funny you should say that, when I first started this project I was trying to figure out how to stick the original rear end on it but no matter how I tried it just looked terrible and I couldn't do it. LOL
steven moore is offline   Reply With Quote


Old June 1st, 2018, 08:59 AM   #67
Ducati999
ninjette.org certified postwhore
 
Name: Ant
Location: Wooster
Join Date: Dec 2013

Motorcycle(s): Ducati 999 2012 Ninja 250r Ducati748 Yellow finally running 2003 SV650 S (SOLD)

Posts: A lot.
Please watch Youtube : Around the corner (1937) How Differential steering works. I cant link to it from here at work but it explains how to build your own simple and durable differential. Based on what I have seen you build so far, you have more than enough skills to fabricate a working differential for any future trikes you may build. I agree with you that it is unnecessary for this project but it never hurts to learn.

The first few mins of the video are weird but stick with it and you will see why I think you could build one easily. Just 9 mins and a few seconds of your time.
Ducati999 is offline   Reply With Quote


1 out of 1 members found this post helpful.
Old June 1st, 2018, 09:01 AM   #68
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
Yeah I have to definitely check that out. I'm in the middle of trying to hook up the rear hydraulic break linkage system at the moment but I'll take a look at that when I get a spare chance. Thanks appreciate it.
steven moore is offline   Reply With Quote


Old June 2nd, 2018, 03:57 PM   #69
steven moore
ninjette.org member
 
Name: steven
Location: las vegas
Join Date: Feb 2018

Motorcycle(s): 07 250 ninja- honda forza 300

Posts: 55
IT LIVES!!

Well finally came off the saw horses and I was able to test it out, it runs. Had to rebuild the chain tensioner. I have to hot wire the fan to a switch. I need to finish wiring to all lights and finish putting the fairing on. And finish paint. Haven't taken it out of the trailer park just yet but I will surely do a test run down the road see what happens.
Attached Images
File Type: jpg 20180602_151217.jpg (140.3 KB, 6 views)
File Type: jpg 20180602_150856.jpg (168.7 KB, 10 views)
File Type: jpg 20180602_150956.jpg (175.2 KB, 7 views)
steven moore is offline   Reply With Quote


2 out of 2 members found this post helpful.
Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Ninja 250 trike project 4950cycle Pictures 40 November 18th, 2016 01:08 PM
Ecotrons Trike. bigbadbob Off-Topic 31 January 8th, 2016 02:00 PM
[motorcycle-usa.com] - Motor Trike Launches Triumph Rocket III Trike Ninjette Newsbot Motorcycling News 0 May 31st, 2014 10:10 AM
250cc Trike MrBrownTX General Motorcycling Discussion 9 May 17th, 2011 09:07 AM
Trike ninja zx12!!! Kitdog General Motorcycling Discussion 10 July 28th, 2010 01:13 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 04:58 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.