Shinto USA order for September - Page 6

nattygirl · November 23rd, 2010, 04:27 PM

Questions: Did Paul confirm that both shipments were sent, or only the first one? If they were shipped at the same time, shouldn't you have received both by now?

Nemesis · November 23rd, 2010, 04:45 PM

Quote:

Originally Posted by nattygirl

Questions: Did Paul confirm that both shipments were sent, or only the first one? If they were shipped at the same time, shouldn't you have received both by now?

Not always. It can get stuck at customs and they usually take their sweet time inspecting stuff.

want1sobad · November 23rd, 2010, 06:29 PM

i'm hoping that two shipments were sent, but until i hear from paul, i cannot confirm.

randomwalk101 · November 24th, 2010, 02:55 AM

Quote:

Originally Posted by want1sobad

i'm hoping that two shipments were sent, but until i hear from paul, i cannot confirm.

Just heard from Paul again. His Internet was day for the last 2 weeks. Everything should be resolved & answered soon.

want1sobad · November 24th, 2010, 11:42 AM

individual orders have been shipped - customers will be contacted with tracking info. also, waiting to hear from Paul regarding 2nd shipement. more info to come as soon as possible.

thanks to all!

want1sobad · November 25th, 2010, 08:55 PM

been exchanging emails with paul all day - 2nd shipment should go out by next friday at the latest. this will include huggers, seat cowls, clip-ons, fork caps, etc.

more info to come as soon as i have it.

nattygirl · November 26th, 2010, 08:36 AM

Did Paul mention if he'll get my red angled risers in that shipment as well?

want1sobad · November 26th, 2010, 09:09 AM

waiting on confirmation

spooph · November 26th, 2010, 12:50 PM

Quote:

Originally Posted by want1sobad

been exchanging emails with paul all day - 2nd shipment should go out by next friday at the latest. this will include huggers, seat cowls, clip-ons, fork caps, etc.

more info to come as soon as i have it.

The rear-set adjuster plates?

want1sobad · November 26th, 2010, 12:54 PM

been advised they should be ready 2-3 weeks and ship towards the end of december.

randomwalk101 · November 26th, 2010, 12:59 PM

paul mentioned that my order is ready so does that means it'll be shipped next friday?

want1sobad · November 26th, 2010, 02:07 PM

sure hope so, that is the date i've given him to ship out everything that ready (obviosuly, sooner is better).

Shwig · November 27th, 2010, 10:10 AM

So i went to the post office and picked up my package. I only have question is the bracket on the shift linkage side supposed to be bent like this?
The break side is straight.

could someone post what they should look like if this isn't it.

randomwalk101 · November 27th, 2010, 10:17 AM

Yes thats so it won't get in the way of your leg.

randomwalk101 · November 27th, 2010, 10:19 AM

Quote:

Originally Posted by want1sobad

sure hope so, that is the date i've given him to ship out everything that ready (obviosuly, sooner is better).

Let's hope it's next fri cuz Paul said Your stuffs going out in 2 weeks

Shwig · November 27th, 2010, 10:29 AM

alright sweet i got worried. every thing seems to be in order then. the packing was fun to dig through

i got shredded news paper every where. ill post pics as soon as i get the stuff on

Nemesis · November 27th, 2010, 11:22 AM

Hell no that's not supposed to be like that. I haven't seen ANY REARSETS bent like that. That's wrong.

EDIT - I just looked at Paul's pics of the rearsets...Why are they bent? I don't know of any rearsets that bends them like them. It defeats the whole purpose of using them to hook your foot while hanging off.

Also, I got confirmation of my shipment but I'm showing it got delivered to another address?

Who lives in AUGUSTA, ME 04330? Cuz you have my rearsets!

want1sobad · November 27th, 2010, 12:21 PM

chill john, if i had mailed your rearsets i would have let you know. they should be with the next pack. i have advised paul that they are a priority.

thanks

Shwig · November 27th, 2010, 12:31 PM

Quote:

Originally Posted by Nemesis

Hell no that's not supposed to be like that. I haven't seen ANY REARSETS bent like that. That's wrong.

EDIT - I just looked at Paul's pics of the rearsets...Why are they bent? I don't know of any rearsets that bends them like them. It defeats the whole purpose of using them to hook your foot while hanging off.

well either it is or it isnt... could someone who purchased rear sets post a pic of theirs?

IF it inst supposed to be that way then what the hell. i shouldn't have to wait 4 months to receive something that's bent.

Could someone please elaborate?

Nemesis · November 27th, 2010, 12:31 PM

Quote:

Originally Posted by want1sobad

chill john, if i had mailed your rearsets i would have let you know. they should be with the next pack. i have advised paul that they are a priority.

thanks

Chill? You send me a tracking number that's not even mine and tell me to chill?

What's wrong with this picture?

Nemesis · November 27th, 2010, 12:33 PM

Quote:

Originally Posted by Shwig

well either it is or it isnt... could someone who purchased rear sets post a pic of theirs?

IF it inst supposed to be that way then what the hell. i shouldn't have to wait 4 months to receive something that's bent.

Could someone please elaborate?

The guard is not supposed to be bent but I think Paul intentionally had these bent so they are not a complete copy of the Sato's as to avoid infringement rights.

I don't think it'll make a huge difference.

Shwig · November 27th, 2010, 12:45 PM

Quote:

Originally Posted by Nemesis

The guard is not supposed to be bent but I think Paul intentionally had these bent so they are not a complete copy of the Sato's as to avoid infringement rights.

I don't think it'll make a huge difference.

why wouldn't he make them uniform then... why send me one that's perfectly straight and one that's at a 45° angle

scotty · November 27th, 2010, 12:46 PM

Quote:

Originally Posted by Shwig

well either it is or it isnt... could someone who purchased rear sets post a pic of theirs?

IF it inst supposed to be that way then what the hell. i shouldn't have to wait 4 months to receive something that's bent.

Could someone please elaborate?

Thats the way they are made. You are okay.

Look for the product picture on here
http://www.ninjette.org/forums/showp...07&postcount=3

Nemesis · November 27th, 2010, 12:49 PM

Quote:

Originally Posted by Shwig

why wouldn't he make them uniform then... why send me one that's perfectly straight and one that's at a 45° angle

Sorry, let me rephrase what I said: Cuz if he made them straight maybe it would be a direct copy of the Sato's giving Sato the ability to shut him down for copyright infringement.

A wild guess but possibly not too far fetched.

But yeah guards are not supposed to be bent at all but in Paul's design he bent them for reasons unknown other than what I stated above.

want1sobad · November 27th, 2010, 01:21 PM

the bend on the heel guard for the shifter side of the rearsets is not a defect. both pairs i received in this shipment were like that. i will ask paul as to the reason for this.

nattygirl · November 28th, 2010, 10:04 AM

Quote:

Originally Posted by want1sobad

been advised they should be ready 2-3 weeks and ship towards the end of december.

Was this addressed towards me or towards spooph?

KURT · November 28th, 2010, 10:13 AM

Quote:

Originally Posted by nattygirl

Was this addressed towards me or towards spooph?

Our rearset extenders, I assume. That's the timeline he gave me anyway.

want1sobad · November 28th, 2010, 11:26 AM

yes natalie, that was in response to spooph's question of the OEM rearset adjusters. i have made it clear to paul that all outstanding orders be shipped by friday at the latest.

BuckyNaked · November 28th, 2010, 11:37 AM

I've noticed that the individual orders have already been shipped and some have already even got theirs. I haven't received any shipment information yet for my order. Any update? best way to contact me is to e-mail wujumpa@yahoo.com because I usually don't get to check the forums daily.

want1sobad · November 28th, 2010, 11:53 AM

brandon,

you've got mail

currentsea · November 29th, 2010, 10:12 AM

Got my Rearsets and integrated tail lights.

Still waiting on the next shipment for my hugger.

Thanks Vince/Paul!

want1sobad · November 29th, 2010, 10:25 AM

thanks for your business jr. 2nd shipment should be out by friday, or sometime early next week - still waiting to hear from paul.

want1sobad · December 2nd, 2010, 08:21 AM

been in constant communication with paul all week, everything should ship by monday next week.

randomwalk101 · December 6th, 2010, 07:54 AM

Today is Monday. Any update?

want1sobad · December 6th, 2010, 08:53 AM

waiting to hear from paul, will update as soon as i have something.

randomwalk101 · December 8th, 2010, 04:33 AM

Quote:

Originally Posted by want1sobad

waiting to hear from paul, will update as soon as i have something.

Just got an email reply from Paul today. Apparently still haven't shipped...yet!! He said he's waiting on you Vince...for whatever reason.

Quote:

Original Email message today (Wed 12-08-2010):

hi John,

You order is Ready, Just waiting on Vince.
Will let you know as soon as its out.

Cheers
Paul

want1sobad · December 8th, 2010, 09:07 AM

good to know he's replying to your emails, i haven't heard from him since saturday. he and i need to get a few things clarified - pack should ship soon.

thanks

randomwalk101 · December 8th, 2010, 10:12 AM

Doesn't sound too good so far...I hope things will get resolved soon.

dyeforever · December 10th, 2010, 06:55 PM

Any update?

randomwalk101 · December 11th, 2010, 03:51 AM

Well first we waited for Paul. Paul is now ready (supposingly) but vince Paypal have issue and can't transfer funds to Paul so Paul won't ship. That needs to be taken care off so we wait some more. That's what I was told at least.

November 23rd, 2010, 04:27 PM	#201
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	Questions: Did Paul confirm that both shipments were sent, or only the first one? If they were shipped at the same time, shouldn't you have received both by now? __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents

November 26th, 2010, 08:36 AM	#207
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	Did Paul mention if he'll get my red angled risers in that shipment as well? __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents

November 27th, 2010, 10:10 AM	#213
Shwig K.D.I.T of ninjette.org Name: Matt Location: Philadelphia, PA Join Date: May 2010 Motorcycle(s): 08' ninja 250r Posts: 44	bent?!?!? So i went to the post office and picked up my package. I only have question is the bracket on the shift linkage side supposed to be bent like this? The break side is straight. could someone post what they should look like if this isn't it. __________________________________________________ "Cover it up while your on the bike, and it'll look the same when you get off of it."

November 27th, 2010, 10:29 AM	#216
Shwig K.D.I.T of ninjette.org Name: Matt Location: Philadelphia, PA Join Date: May 2010 Motorcycle(s): 08' ninja 250r Posts: 44	alright sweet i got worried. every thing seems to be in order then. the packing was fun to dig through i got shredded news paper every where. ill post pics as soon as i get the stuff on __________________________________________________ "Cover it up while your on the bike, and it'll look the same when you get off of it."

December 2nd, 2010, 08:21 AM	#233
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	update been in constant communication with paul all week, everything should ship by monday next week.

November 23rd, 2010, 06:29 PM	#203
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	i'm hoping that two shipments were sent, but until i hear from paul, i cannot confirm.

November 24th, 2010, 11:42 AM	#205
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	individual orders have been shipped - customers will be contacted with tracking info. also, waiting to hear from Paul regarding 2nd shipement. more info to come as soon as possible. thanks to all!

November 25th, 2010, 08:55 PM	#206
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	been exchanging emails with paul all day - 2nd shipment should go out by next friday at the latest. this will include huggers, seat cowls, clip-ons, fork caps, etc. more info to come as soon as i have it.

November 26th, 2010, 09:09 AM	#208
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	waiting on confirmation

November 26th, 2010, 12:54 PM	#210
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	been advised they should be ready 2-3 weeks and ship towards the end of december.

November 26th, 2010, 12:59 PM	#211
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	paul mentioned that my order is ready so does that means it'll be shipped next friday?

November 26th, 2010, 02:07 PM	#212
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	sure hope so, that is the date i've given him to ship out everything that ready (obviosuly, sooner is better).

November 27th, 2010, 10:17 AM	#214
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	Yes thats so it won't get in the way of your leg.

November 27th, 2010, 11:22 AM	#217
Nemesis CVMA #74 WSMC #750 Name: Nemesis Location: On the track Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.	Hell no that's not supposed to be like that. I haven't seen ANY REARSETS bent like that. That's wrong. EDIT - I just looked at Paul's pics of the rearsets...Why are they bent? I don't know of any rearsets that bends them like them. It defeats the whole purpose of using them to hook your foot while hanging off. Also, I got confirmation of my shipment but I'm showing it got delivered to another address? Who lives in AUGUSTA, ME 04330? Cuz you have my rearsets!

November 27th, 2010, 12:21 PM	#218
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	chill john, if i had mailed your rearsets i would have let you know. they should be with the next pack. i have advised paul that they are a priority. thanks

November 27th, 2010, 01:21 PM	#225
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	the bend on the heel guard for the shifter side of the rearsets is not a defect. both pairs i received in this shipment were like that. i will ask paul as to the reason for this.

November 28th, 2010, 11:26 AM	#228
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	yes natalie, that was in response to spooph's question of the OEM rearset adjusters. i have made it clear to paul that all outstanding orders be shipped by friday at the latest.

November 28th, 2010, 11:37 AM	#229
BuckyNaked ninjette.org member Name: Brandon Location: Wichita, KS Join Date: Aug 2010 Motorcycle(s): 08' Ninja 250 - 06' CBR600RR Posts: 76	I've noticed that the individual orders have already been shipped and some have already even got theirs. I haven't received any shipment information yet for my order. Any update? best way to contact me is to e-mail wujumpa@yahoo.com because I usually don't get to check the forums daily.

November 28th, 2010, 11:53 AM	#230
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	brandon, you've got mail

November 29th, 2010, 10:12 AM	#231
currentsea ninjette.org member Name: J.R. Location: Santa Barbara Join Date: Aug 2009 Motorcycle(s): 2008 Ninja 250R Posts: 118	Got my Rearsets and integrated tail lights. Still waiting on the next shipment for my hugger. Thanks Vince/Paul!

November 29th, 2010, 10:25 AM	#232
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	thanks for your business jr. 2nd shipment should be out by friday, or sometime early next week - still waiting to hear from paul.

December 6th, 2010, 07:54 AM	#234
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	Today is Monday. Any update?

December 6th, 2010, 08:53 AM	#235
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	waiting to hear from paul, will update as soon as i have something.

December 8th, 2010, 09:07 AM	#237
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	good to know he's replying to your emails, i haven't heard from him since saturday. he and i need to get a few things clarified - pack should ship soon. thanks

December 8th, 2010, 10:12 AM	#238
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	Doesn't sound too good so far...I hope things will get resolved soon.

December 10th, 2010, 06:55 PM	#239
dyeforever ninjette.org member Name: Jesse Location: Kona, Hawaii Join Date: Sep 2010 Motorcycle(s): 04 250r(sold), 09 250r(sold), 07 CRF450x, 07 sv650(sold) Posts: 110	Any update?

December 11th, 2010, 03:51 AM	#240
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	Well first we waited for Paul. Paul is now ready (supposingly) but vince Paypal have issue and can't transfer funds to Paul so Paul won't ship. That needs to be taken care off so we wait some more. That's what I was told at least.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New way to place Shinto USA orders	want1sobad	Motorcycle-related	2	December 17th, 2010 07:49 AM
Shinto USA Pricelist	want1sobad	Motorcycle-related	4	August 27th, 2010 12:01 PM
first shinto bulk order 7/30/10	want1sobad	Motorcycle-related	15	August 6th, 2010 10:09 AM
Shinto Racing USA	want1sobad	Motorcycle-related	31	July 9th, 2010 03:48 AM
SHINTO - Sprocket Cover - Pre-Order	ThaiNinjaRR	Motorcycle-related	7	May 19th, 2010 10:21 AM