August 14th, 2020, 08:04 PM | #1 |
ninjette.org newbie
Name: Tony
Location: 8610 E 30th Ter
Join Date: Aug 2020 Motorcycle(s): 2007 ninja ex250f Posts: 4
|
Camshaft change issue - won't start
Ok first allow me to say that I'm grateful to be here and I have a big problem I was changing my camshaft and doing a timing when I took out my cluch and it's the housing and I put them back together and I tried to turn it over and now my engine just spins without turn over I really need help can somebody please let me know what's going on
|
|
August 14th, 2020, 08:18 PM | #2 |
ninjette.org newbie
Name: Tony
Location: 8610 E 30th Ter
Join Date: Aug 2020 Motorcycle(s): 2007 ninja ex250f Posts: 4
|
Camshaft change issue - won't start
Ok first allow me to say that I'm grateful to be here and I have a big problem I was changing my camshaft and doing a timing when I took out my cluch and it's the housing and I put them back together and I tried to turn it over and now my engine just spins without turn over I really need help can somebody please let me know what's going on
|
|
August 14th, 2020, 08:24 PM | #3 |
ninjette.org newbie
Name: Tony
Location: 8610 E 30th Ter
Join Date: Aug 2020 Motorcycle(s): 2007 ninja ex250f Posts: 4
|
07 ninja ex250f
Ok first allow me to say that I'm grateful to be here and I have a big problem I was changing my camshaft and doing a timing when I took out my cluch and it's the housing and I put them back together and I tried to turn it over and now my engine just spins without turn over I really need help can somebody please let me know what's going on
|
|
August 14th, 2020, 11:56 PM | #4 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Hi Tony and welcome to Ninjette!
Why were you changing cam? Why did you remove clutch? Do you have factory workshop manual? I recommend getting one before doing any more work on your engine. There’s exact procedures that must be followed to do job properly. And with issues from not being done properly, things gets much, much more complicated. Chances of destroying engine has just increased tremendously! |
|
August 15th, 2020, 04:45 AM | #5 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/moved to separate thread
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bike won't start and backfires when trying to start | TrickyTriggs | General Motorcycling Discussion | 30 | April 16th, 2018 08:35 PM |
Camshaft issue | acook3323 | 1986 - 2007 Ninja 250R Tech Talk | 13 | November 20th, 2016 09:02 PM |
2009 Ninja 250 Won't Start, oil change smelled like gasoline | sreisig1 | 2008 - 2012 Ninja 250R Tech Talk | 12 | May 26th, 2015 09:20 AM |
Camshaft Issue | jpatt87 | 2008 - 2012 Ninja 250R Tech Talk | 42 | March 25th, 2014 02:49 PM |
Oil change issue? | Minnesotah | 2008 - 2012 Ninja 250R Tech Talk | 13 | August 29th, 2010 04:47 PM |
|
|