My Green Ninja 250 From Bali, Indonesia

patzcool · July 6th, 2009, 04:40 AM

Hai Bro & Sis... this is my first post in ninjette forum.. please don't laugh ok? hehehe....

I'm sorry for the ugly background.. that's my little house and my old car...

noche_caliente · July 6th, 2009, 08:21 AM

Hi Patrick! It's great to have you here with us. We have at least one other member here from Bali, and probably more that I don't know about.

paterick4o8 · July 6th, 2009, 12:03 PM

Hi again Patrick
Nice mods so far

What kind of exhaust is that? is it full system or just a slip on???
Oh btw, what size rear tire do you have? I'm thinking of maybe getting a rear hugger too, but not sure if my 150 tire will rub against the rear hugger/chain guard

komohana · July 6th, 2009, 12:22 PM

aloha patrick

bike looks good!

jola · July 6th, 2009, 01:58 PM

That tinted light looks fantastic.

Snake · July 6th, 2009, 02:12 PM

Nice looking bike. I like the exhaust. What type of exhaust is that?

delvey91 · July 6th, 2009, 02:17 PM

Whats that cover over the tank??? It looks well good

Very nice bike

AnarchoMoltov · July 6th, 2009, 02:20 PM

HA-Y-N NINJA · July 6th, 2009, 03:36 PM

Roll on!!

Custom Seat Creations · July 6th, 2009, 03:44 PM

Welcome to the board!

patzcool · July 6th, 2009, 06:12 PM

Quote:

Originally Posted by noche_caliente

Hi Patrick! It's great to have you here with us. We have at least one other member here from Bali, and probably more that I don't know about.

Thank you bro noche_caliente....

Quote:

Originally Posted by paterick4o8

Hi again Patrick
Nice mods so far

What kind of exhaust is that? is it full system or just a slip on???
Oh btw, what size rear tire do you have? I'm thinking of maybe getting a rear hugger too, but not sure if my 150 tire will rub against the rear hugger/chain guard

Hello my twin brother.. hehehe..

It is a CLD Carbon Full System Exhaust.. the cheapest carbon exhaust in my country..

I use 120/70-17 for the front and 160/60-17 for the rear..

Quote:

Originally Posted by komohana

aloha patrick

bike looks good!

aloha bro komohana... thank you very much..

Quote:

Originally Posted by jola

That tinted light looks fantastic.

thank you bro jola..

Quote:

Originally Posted by Snake

Nice looking bike. I like the exhaust. What type of exhaust is that?

thank you bro Snake... the same answer with bro noche_caliente..

CLD Carbon Full System exhaust...

patzcool · July 6th, 2009, 06:16 PM

Quote:

Originally Posted by delvey91

Whats that cover over the tank??? It looks well good

Very nice bike

Thank you bro delvey91...

It is a fiberglass cover tank.. make your tank look bigger than before..

Quote:

Originally Posted by AnarchoMoltov

Thank you bro AnarchoMoltov...

Quote:

Originally Posted by HA-Y-N NINJA

Roll on!!

Thank you bro HA-Y-N NINJA...

Quote:

Originally Posted by Custom Seat Creations

Welcome to the board!

Thank you bro Custom Seat Creations..

paterick4o8 · July 6th, 2009, 06:22 PM

Quote:

Originally Posted by patzcool

Hello my twin brother.. hehehe..

It is a CLD Carbon Full System Exhaust.. the cheapest carbon exhaust in my country..

I use 120/70-17 for the front and 160/60-17 for the rear..

cool! now let's hear some sound clips of that nice cheapest CF exhaust in your country!

I likey it

patzcool · July 6th, 2009, 06:36 PM

Quote:

Originally Posted by paterick4o8

cool! now let's hear some sound clips of that nice cheapest CF exhaust in your country!

I likey it

OMG... hehehe.. ok bro, I'll record it specially for you, my twin brother... hehehe..

miks · July 6th, 2009, 09:41 PM

Welcome mate, great looking bike you have there.

patzcool · July 6th, 2009, 10:07 PM

Quote:

Originally Posted by miks

Welcome mate, great looking bike you have there.

thank you bro miks...

Nemy · July 6th, 2009, 11:05 PM

Welcome to the site patzcool! I'm liking that fender eliminator. Is that homemade?

patzcool · July 7th, 2009, 12:22 AM

Quote:

Originally Posted by Nemy

Welcome to the site patzcool! I'm liking that fender eliminator. Is that homemade?

Hallo bro Nemy... yes, the fender eliminator is homemade... made by fiberglass... it's call "UNDERTAIL" in my country...

patzcool · July 7th, 2009, 01:57 AM

Quote:

Originally Posted by paterick4o8

cool! now let's hear some sound clips of that nice cheapest CF exhaust in your country!

I likey it

yow yow... this is some record of CLD Carbon FS specially for mr. paterick4o8...

Nickds7 · July 7th, 2009, 02:21 AM

Quote:

Originally Posted by patzcool

yow yow... this is some record of CLD Carbon FS specially for mr. paterick4o8...

Very nice, cost?

Would be nice to be able to import some of these in the us.

patzcool · July 7th, 2009, 02:46 AM

Quote:

Originally Posted by Nickds7

Very nice, cost?

Would be nice to be able to import some of these in the us.

Do you like it?

it cost about US$300...

anyone want to import it?? hehehe....

miks · July 7th, 2009, 04:05 AM

Exhaust sounds pretty tough. With the front license plate, is that a law that you have to put it there?

patzcool · July 7th, 2009, 08:03 AM

Quote:

Originally Posted by miks

Exhaust sounds pretty tough. With the front license plate, is that a law that you have to put it there?

hai miks... the sounds of CLD exhaust not as loud as two brothers or yoshimura exhaust..

I don't understand about the sentence "With the front license plate, is that a law that you have to put it there?"..... I'm so sorry, my english language not good enough bro....

noche_caliente · July 7th, 2009, 08:52 AM

Quote:

Originally Posted by patzcool

hai miks... the sounds of CLD exhaust not as loud as two brothers or yoshimura exhaust..

I don't understand about the sentence "With the front license plate, is that a law that you have to put it there?"..... I'm so sorry, my english language not good enough bro....

Miks, the front plate is a requirement there - I saw that posted on another thread around here somewhere...

patzcool · July 7th, 2009, 09:03 AM

Quote:

Originally Posted by noche_caliente

Miks, the front plate is a requirement there - I saw that posted on another thread around here somewhere...

oooowwww... maybe now I'm understand what miks talking about.. the front plate that I put behind the windshield, am I right??

I thought the conversation still in the CLD exhaust...

paterick4o8 · July 7th, 2009, 12:55 PM

Quote:

Originally Posted by patzcool

yow yow... this is some record of CLD Carbon FS specially for mr. paterick4o8...

Thanks brotha. sounds pretty nice, actually, sounds like my slip-on I have except I paid the same ~$300. it's a FMF CF slip-on made in southern California. (http://img.photobucket.com/albums/v2...R/CIMG1603.jpg)

But wow for a full system, that's a good price. Nice one!

ztrack157 · July 7th, 2009, 01:40 PM

Patrick do you work for one of the tuners in Bali or are you one of them. CDL has been on my list to inquire about.

patzcool · July 7th, 2009, 08:50 PM

Quote:

Originally Posted by paterick4o8

Thanks brotha. sounds pretty nice, actually, sounds like my slip-on I have except I paid the same ~$300. it's a FMF CF slip-on made in southern California. (http://img.photobucket.com/albums/v2...R/CIMG1603.jpg)

But wow for a full system, that's a good price. Nice one!

That's why I choose CLD exhaust bro.. besides I don't have much money to buy yoshi or another expensive exhaust...

FMF exhaust has a very good looking like two brothers.. extravagant!!

Quote:

Originally Posted by ztrack157

Patrick do you work for one of the tuners in Bali or are you one of them. CDL has been on my list to inquire about.

Well I'm one of the tuners in Bali my bro..

wayanlam · July 9th, 2009, 05:46 PM

woot, someone else from bali!~ Patrick, ill have to come see you some time soon, id love to see your bike, and compare it with my totally stock bike he he he...

do you have your own workshop (bengkel) or do you bring it to a modding place? i don't quite understand what you mean by "Well I'm one of the tuners in Bali my bro.." :P

there are several mods that i plan to do with locally available things, but im still quite convinced to save up and buy a full exhaust system from Area P!

id love to hear your experience with setting up your Jet kit. the mechanics at the Kawasaki dealer told me they did some Main jet adjustments, and it was very hard to get the correct settings!

peace out~
W.

PS. the pictures you posted in the other thread looks great, that's in GWK right? i'm guessing your part of the Kawasaki ninja club here in bali, he he... how often do you go around touring, and where to mostly?? jalanya di sini semua rusak banget!

patzcool · July 9th, 2009, 09:30 PM

Hallo Bli Wayan.... Cek your PM....

patzcool · July 20th, 2009, 06:21 AM

Just for fun....

wayanlam · July 20th, 2009, 06:40 PM

went over to visit Patric at his shop last week

his bike has a lot of mods so far, and its looking sweet!

i already reserved some parts (tank pad, and a radiator protector for now lol) so i can have them fitted next time i have some time to go visit him.

im waiting to see if he will get some nice flush mount blinkers, he he

patzcool · July 21st, 2009, 02:33 AM

hello again bro wayan... thanx a lot bro, my bike only have a simple mods.. not a lot like others bike in here..

Very nice to know you, bro wayan.. very friendly.. i like you..

flush mount blinkers?? actually I don't like it bro.. hehehe... but I can get some if you really want it..

wayanlam · July 21st, 2009, 03:31 AM

i saw some flush mounts in the indo forums that are available in Jkt, and so far i havent seen any that i like... do you by chance have any pictures?

bobaab · July 21st, 2009, 05:07 AM

Nice bike! Must be nice to ride around Bali with it! One of my best friends is Indonesian, and I lived with him and another Indo last year at my university! I'm a Japanese-American, but I've hung out with Indo's for a couple years now...I have a bunch of Indo friends so I should know more Indonesian...lol

Nama saya Bob! The rest of the stuff I remember are all bad words

wayanlam · July 21st, 2009, 05:45 PM

well it depends what you calcify as nice i guess... from the youtube movies ive seen, the roads in the states are so nice to go riding on, so many winding roads that are EMPTY!

here the only reason a road would be empty is if its so broken people don't tend to ride on them... then there are the nice roads (by nice i mainly mean well maintained asphalt, no potholes) and they are full of traffic...

anyhow, there are a handful of roads around that im sure must be great to ride here, even with some traffic, just have to find them!

cheers~

patzcool · July 21st, 2009, 08:17 PM

Quote:

Originally Posted by wayanlam

i saw some flush mounts in the indo forums that are available in Jkt, and so far i havent seen any that i like... do you by chance have any pictures?

I have some but I download them from the indo forum too bro...

Is it accord with your purpose?

Quote:

Originally Posted by bobaab

Nice bike! Must be nice to ride around Bali with it! One of my best friends is Indonesian, and I lived with him and another Indo last year at my university! I'm a Japanese-American, but I've hung out with Indo's for a couple years now...I have a bunch of Indo friends so I should know more Indonesian...lol

Nama saya Bob! The rest of the stuff I remember are all bad words

hahaha... nama saya Patrick... Patrick and Spongebob are friend..

Nice to know you bob.. would you give your Indonesian friend greetings from me??

Oh my God... my english language so awful... I'm sorry if you guys didn't understand what I'm talking about...

wayanlam · July 21st, 2009, 09:15 PM

Quote:

Originally Posted by patzcool

Oh my God... my english language so awful... I'm sorry if you guys didn't understand what I'm talking about...

i can be your translator

and regarding the flush mounts, what i have seen so far, and looks good are these:

pernah lihat?

ninjablk08 · July 21st, 2009, 10:46 PM

wow 160-60-17 rear, how does it ride? no rubbing?

wayanlam · July 21st, 2009, 10:54 PM

yo Patrick, i was reading the newspaper today and saw an advertising for a showroom in Bali for these bikes, Megelli 250r... after doing some searching around i found some pictures, and specs.

the bike looks quite nice, but.... the engine/power is terrible, i think its only 17Hp? ha ha... like a Honda Tiger, even a Satria 150 could probably beat it

i would like to see the bike, just to see the quality though... its only like 1/2 the price of the Kawe Ninja 250r

July 6th, 2009, 04:40 AM	#1
patzcool ninjette.org member Name: Patrick Location: Bali Join Date: Jun 2009 Motorcycle(s): Kawasaki Ninja 250R Posts: 38	My Green Ninja 250 From Bali, Indonesia Hai Bro & Sis... this is my first post in ninjette forum.. please don't laugh ok? hehehe.... I'm sorry for the ugly background.. that's my little house and my old car... __________________________________________________ CLD Python,Factory Pro Jet Kit,K&N 0990,BT92 Tire,Undertail,Rear Huger Cover Arm GSX,Undercowl,Cover Lamp,Cover Radiator,Cover Tank,Koso RX2,Vortex Gear,BRT TIS,Big Rotor,LED Brake Light,etc..

July 6th, 2009, 08:21 AM	#2
noche_caliente ninjette.org certified postwhore Name: Kim Location: mundo de ensueño Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.	Hi Patrick! It's great to have you here with us. We have at least one other member here from Bali, and probably more that I don't know about. __________________________________________________ Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders

July 6th, 2009, 12:03 PM	#3
paterick4o8 ninjette.org certified postwhore Name: patricK Location: San Jose, CA--BAY AREA! Join Date: Mar 2009 Motorcycle(s): '08 250R named BabyBlue ^__^ Posts: 782	Hi again Patrick Nice mods so far What kind of exhaust is that? is it full system or just a slip on??? Oh btw, what size rear tire do you have? I'm thinking of maybe getting a rear hugger too, but not sure if my 150 tire will rub against the rear hugger/chain guard __________________________________________________ FMF Slip-on/Targa heat shield/Shimmed needles/No snorkel/HIDs/Lamin-X film/DIY fender cut w/ LEDs/Shogun sliders/Cheap a$$ rearsets/Hotbodies GP windscreen/Galfer SS brakeline/WC Clipons/Water Wetter

July 6th, 2009, 12:22 PM	#4
komohana ninjette.org certified postwhore Name: Steve Location: Kekaha, Kauai HI Join Date: Jan 2009 Motorcycle(s): 2003 EX250: Woodcraft Clip-On's, Carbon Fibr Levers, Sport Mirrors, Shim'd Mixture, Synthetic, '08 Rear Shock Posts: A lot.	aloha patrick bike looks good! __________________________________________________ Remember when sex was safe and motorcycles were dangerous?

July 6th, 2009, 02:17 PM	#7
delvey91 Fuel Injection FTW Name: Jack Location: Exeter, Devon, UK Join Date: Feb 2009 Motorcycle(s): Old:2008 Kawasaki Ninja 250R New:99 ZX6R 'G2' Posts: 32	Whats that cover over the tank??? It looks well good Very nice bike __________________________________________________ 1999 Kawasaki ZX6R 'G2' Got: Powerbronze Irdium Screen, Powerbronze Rear Hugger, A.R.T Racing Slip on can

July 6th, 2009, 01:58 PM	#5
jola ninjette.org member Name: Joe Location: North Dakota Join Date: Jun 2009 Motorcycle(s): 2000 Ninja 250R Posts: 68	That tinted light looks fantastic.

July 6th, 2009, 02:12 PM	#6
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: A lot.	Nice looking bike. I like the exhaust. What type of exhaust is that?

July 6th, 2009, 02:20 PM	#8
AnarchoMoltov ninjette.org guru Name: Dan Location: Chicago, il.... Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378

July 6th, 2009, 03:36 PM	#9
HA-Y-N NINJA ninjette.org member Name: Cholby Location: Tualatin,Oregon Join Date: May 2009 Motorcycle(s): 2008 Plasma Blue 250 ninja Posts: 74	Roll on!!

July 6th, 2009, 03:44 PM	#10
Custom Seat Creations Sportbike Seat Covers Name: Becky Location: Colorado Springs Join Date: Dec 2008 Motorcycle(s): 10' Special Edition Tribal 250 Red/Black ; 08' Ninja 250 (RIP by a cager); 05' Honda CBR 600 Posts: 209	Welcome to the board! __________________________________________________ Custom Seat Creations Home Site Bonanzle Store

July 6th, 2009, 09:41 PM	#15
miks I'm lovin' it. Name: Mike Location: Melb, Australia Join Date: Feb 2009 Motorcycle(s): '09 Black 250R Posts: A lot.	Welcome mate, great looking bike you have there. __________________________________________________ Son: When I grow up I want to ride a motorbike. Father: You can't do both son.

July 6th, 2009, 11:05 PM	#17
Nemy ninjette.org certified postwhore Name: Tim Location: Toronto, Canada Join Date: Dec 2008 Motorcycle(s): 2009 SE Ninja 250R Posts: 763	Welcome to the site patzcool! I'm liking that fender eliminator. Is that homemade?

July 7th, 2009, 04:05 AM	#22
miks I'm lovin' it. Name: Mike Location: Melb, Australia Join Date: Feb 2009 Motorcycle(s): '09 Black 250R Posts: A lot.	Exhaust sounds pretty tough. With the front license plate, is that a law that you have to put it there? __________________________________________________ Son: When I grow up I want to ride a motorbike. Father: You can't do both son.

July 7th, 2009, 01:40 PM	#27
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Patrick do you work for one of the tuners in Bali or are you one of them. CDL has been on my list to inquire about. __________________________________________________ Sportisimoto USA is born.

July 9th, 2009, 05:46 PM	#29
wayanlam ninjette.org guru Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2008 Ninja 250R Posts: 286	woot, someone else from bali!~ Patrick, ill have to come see you some time soon, id love to see your bike, and compare it with my totally stock bike he he he... do you have your own workshop (bengkel) or do you bring it to a modding place? i don't quite understand what you mean by "Well I'm one of the tuners in Bali my bro.." :P there are several mods that i plan to do with locally available things, but im still quite convinced to save up and buy a full exhaust system from Area P! id love to hear your experience with setting up your Jet kit. the mechanics at the Kawasaki dealer told me they did some Main jet adjustments, and it was very hard to get the correct settings! peace out~ W. PS. the pictures you posted in the other thread looks great, that's in GWK right? i'm guessing your part of the Kawasaki ninja club here in bali, he he... how often do you go around touring, and where to mostly?? jalanya di sini semua rusak banget!

July 9th, 2009, 09:30 PM	#30
patzcool ninjette.org member Name: Patrick Location: Bali Join Date: Jun 2009 Motorcycle(s): Kawasaki Ninja 250R Posts: 38	Hallo Bli Wayan.... Cek your PM.... __________________________________________________ CLD Python,Factory Pro Jet Kit,K&N 0990,BT92 Tire,Undertail,Rear Huger Cover Arm GSX,Undercowl,Cover Lamp,Cover Radiator,Cover Tank,Koso RX2,Vortex Gear,BRT TIS,Big Rotor,LED Brake Light,etc..

July 20th, 2009, 06:21 AM	#31
patzcool ninjette.org member Name: Patrick Location: Bali Join Date: Jun 2009 Motorcycle(s): Kawasaki Ninja 250R Posts: 38	Just for fun.... __________________________________________________ CLD Python,Factory Pro Jet Kit,K&N 0990,BT92 Tire,Undertail,Rear Huger Cover Arm GSX,Undercowl,Cover Lamp,Cover Radiator,Cover Tank,Koso RX2,Vortex Gear,BRT TIS,Big Rotor,LED Brake Light,etc..

July 20th, 2009, 06:40 PM	#32
wayanlam ninjette.org guru Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2008 Ninja 250R Posts: 286	went over to visit Patric at his shop last week his bike has a lot of mods so far, and its looking sweet! i already reserved some parts (tank pad, and a radiator protector for now lol) so i can have them fitted next time i have some time to go visit him. im waiting to see if he will get some nice flush mount blinkers, he he

July 21st, 2009, 02:33 AM	#33
patzcool ninjette.org member Name: Patrick Location: Bali Join Date: Jun 2009 Motorcycle(s): Kawasaki Ninja 250R Posts: 38	hello again bro wayan... thanx a lot bro, my bike only have a simple mods.. not a lot like others bike in here.. Very nice to know you, bro wayan.. very friendly.. i like you.. flush mount blinkers?? actually I don't like it bro.. hehehe... but I can get some if you really want it.. __________________________________________________ CLD Python,Factory Pro Jet Kit,K&N 0990,BT92 Tire,Undertail,Rear Huger Cover Arm GSX,Undercowl,Cover Lamp,Cover Radiator,Cover Tank,Koso RX2,Vortex Gear,BRT TIS,Big Rotor,LED Brake Light,etc..

July 21st, 2009, 03:31 AM	#34
wayanlam ninjette.org guru Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2008 Ninja 250R Posts: 286	i saw some flush mounts in the indo forums that are available in Jkt, and so far i havent seen any that i like... do you by chance have any pictures?

July 21st, 2009, 05:07 AM	#35
bobaab ninjette.org member Name: Bob Location: Park Ridge, IL Join Date: Jul 2009 Motorcycle(s): 2001 Kawasaki Ninja 250 Posts: 74	Nice bike! Must be nice to ride around Bali with it! One of my best friends is Indonesian, and I lived with him and another Indo last year at my university! I'm a Japanese-American, but I've hung out with Indo's for a couple years now...I have a bunch of Indo friends so I should know more Indonesian...lol Nama saya Bob! The rest of the stuff I remember are all bad words

July 21st, 2009, 05:45 PM	#36
wayanlam ninjette.org guru Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2008 Ninja 250R Posts: 286	well it depends what you calcify as nice i guess... from the youtube movies ive seen, the roads in the states are so nice to go riding on, so many winding roads that are EMPTY! here the only reason a road would be empty is if its so broken people don't tend to ride on them... then there are the nice roads (by nice i mainly mean well maintained asphalt, no potholes) and they are full of traffic... anyhow, there are a handful of roads around that im sure must be great to ride here, even with some traffic, just have to find them! cheers~

July 21st, 2009, 10:46 PM	#39
ninjablk08 ninjette.org guru Name: oscar Location: antioch, ca (bay area) Join Date: Feb 2009 Motorcycle(s): blk ninja 250 2008 Posts: 391	wow 160-60-17 rear, how does it ride? no rubbing? __________________________________________________ 2 bro CFSO, factory pro 3, hotbody DS , krayzie graphics rim tape, brake flasher, DIY fender chop, DIY flushmounts & LED rear, K&N filter, 15/43 Driven, DID race chain, air stuff removed, clipons

July 21st, 2009, 10:54 PM	#40
wayanlam ninjette.org guru Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2008 Ninja 250R Posts: 286	yo Patrick, i was reading the newspaper today and saw an advertising for a showroom in Bali for these bikes, Megelli 250r... after doing some searching around i found some pictures, and specs. the bike looks quite nice, but.... the engine/power is terrible, i think its only 17Hp? ha ha... like a Honda Tiger, even a Satria 150 could probably beat it i would like to see the bike, just to see the quality though... its only like 1/2 the price of the Kawe Ninja 250r

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
member Ninja 250r community from Indonesia	Hope250	Pictures	7	March 4th, 2010 02:46 PM
FS: 1999 Green Ninja 250 LI, NY	Grn99Kawi	Motorcycle-related	5	November 15th, 2009 06:24 PM
2008 Lime Green Ninja 250 FS in NJ	killerkay3	Motorcycle-related	2	November 2nd, 2009 03:41 PM
Hellow from Bali, Indonesia	patzcool	New Members	29	June 17th, 2009 04:31 AM
Green Ninja (Turtles)	CC Cowboy	New Members	14	January 22nd, 2009 08:48 AM