fishdip
December 16th, 2013, 10:06 PM
What is a good place to get new calipers for the pregen?
View Full Version : Brake calipers fishdip December 16th, 2013, 10:06 PM What is a good place to get new calipers for the pregen? JohnnyBravo December 17th, 2013, 07:29 AM What caliber brakes you want? Brembo :thumbup: fishdip December 17th, 2013, 09:32 AM What caliber brakes you want? Brembo :thumbup: Any brand works. JohnnyBravo December 17th, 2013, 09:46 AM You check the part ninja? agentbad December 17th, 2013, 10:03 AM What caliber brakes you want? Brembo :thumbup: Aren't brembo calipers like 500 bucks? Any brand works. Check the classifields for parted out bikes. For a new one it's around $229 on bike bandit. http://www.bikebandit.com/houseofmotorcycles/2005-kawasaki-ninja-250r-ex250f/o/m149183#sch434950 greg737 December 17th, 2013, 11:01 AM would this change be merely for appearances? properly maintained stock pre-gen calipers with braided stainless steel lines will give you all the braking force that the pre-gen sized tires can handle. tfkrocks December 17th, 2013, 02:38 PM You check the part ninja? He doesn't deal with pre-gens. Take a look at which forum you're in :p JohnnyBravo December 17th, 2013, 02:48 PM He doesn't deal with pre-gens. Take a look at which forum you're in :p Derp... Yea um yea um yea fishdip December 17th, 2013, 08:12 PM He doesn't deal with pre-gens. Take a look at which forum you're in :p ? fishdip December 17th, 2013, 08:28 PM would this change be merely for appearances? properly maintained stock pre-gen calipers with braided stainless steel lines will give you all the braking force that the pre-gen sized tires can handle. no the person that had laid it down and now they are starting to rust. fishdip December 17th, 2013, 08:31 PM You check the part ninja? ? tfkrocks December 17th, 2013, 08:37 PM ? Parts Ninja is a guy who parts out new-gen 250s and 300s. Obviously that suggestion wouldn't be useful to you since you have a pre-gen unless it's one of the interchangeable parts. JohnnyBravo December 18th, 2013, 05:59 AM ? Was in the wrong forum... My bad 7oxSin December 18th, 2013, 09:38 AM no the person that had laid it down and now they are starting to rust. sand them down and use caliper paint, aint no reason to break the bank for cosmetic damage. agentbad December 18th, 2013, 10:48 AM sand them down and use caliper paint, aint no reason to break the bank for cosmetic damage. Don't forget the cylinder rebuild kit. fishdip December 19th, 2013, 01:18 AM sand them down and use caliper paint, aint no reason to break the bank for cosmetic damage. I was thinking about doing that but they bleed a little :eek: 7oxSin December 20th, 2013, 11:42 AM I was thinking about doing that but they bleed a little :eek: yeah a rebuild kit will fix that problem |
|