ninjette.org

Go Back   ninjette.org > Blogs

Notices

Old

SV650 Clip-on Swap

Posted May 3rd, 2012 at 12:36 AM by Gorilla25

Follow me through a SV650 clip-on swap:

http://www.ninjette.org/forums/showthread.php?t=102742
Gorilla25's Avatar
Dakine...
Posted in Uncategorized
Views 4369 Comments 0 Gorilla25 is offline

Old
Rating: 2 votes, 5.00 average.

DIY: CBR 250 Hugger install on 08+ Ninja 250r

Posted April 25th, 2012 at 09:08 PM by Gorilla25

Could not find any real clear DIY for this mod so here is my attempt at it.

Supplies:
CBR Hugger
10mm Socket
Allen wrench from bike tool kit
Something to cut the plastic (Dremel, Saw, Util. Knife)
Zip-ties
Rear Stand (not necessary, but good to have)


Difficulty level (1-5, 5 being hard): 2

Process:
1. Put bike on rear stand
2. Remove Passenger pegs, exhaust, stock chain guard.
3. Make necessary modifications (Cut and drill), shown in pictures below
4. Install Hugger
5. Put bike back together.

NOTE:
The last cuts (on the inside where my rear shock is) is not needed if you have the stock rear shock. Instead, you will need to simply notch a clearance for the chain guard guide/holder.


Here is some pics before modification and installation:
...
Gorilla25's Avatar
Dakine...
Posted in Uncategorized
Views 21645 Comments 15 Gorilla25 is offline
Old

My Mods

Posted April 9th, 2012 at 11:52 PM by Gorilla25
Updated July 31st, 2012 at 08:09 PM by Gorilla25

INTAKE:
  • Pipercross Air filter
  • Snorkel Delete
  • Kleen System Delete
  • Shimmed needles

EXHAUST:
  • Dan Moto Slip-on exhaust (Carbon GP)

LIGHTING & SAFETY:
  • Brake light modulator
  • DIY shortened turn signals
  • Aftermarket short-stalk rear turn signals
  • Phillips Motovision Hi/Low beam
  • BMW front fork reflectors
  • Reflective rim stripe

SUSPENSION:
  • Custom R1 rear shock
  • Custom adjustable dog bones
  • DIY front preload adjusters

RIDE POSITIONING & FEEL:
  • A&L rear set adjusters
  • SV650 Clip-ons
  • ZX6r pegs
  • GP Shifting
THROTTLE & CONTROLS:
  • Zip-Tie mod

OTHER:
  • Sho Gun frame sliders
  • Rear Spools
  • DIY Fender chop
  • CBR Rear tire hugger
  • 650r Mirrors
  • Tank Pad
  • Smoked double bubble windscreen
Gorilla25's Avatar
Dakine...
Posted in Uncategorized
Views 2665 Comments 0 Gorilla25 is offline
Old

Follow me though a rear shock swap

Posted February 11th, 2012 at 11:27 PM by Gorilla25

Originally wanted to do a CBR shock swap because some have remote reservoirs. I could not find a decently priced one, so i settled for swapping in an R1 shock. click for more details.

http://www.ninjette.org/forums/showthread.php?t=95716
Gorilla25's Avatar
Dakine...
Posted in Uncategorized
Views 2168 Comments 0 Gorilla25 is offline
Old

Follow me through my fork seal change and stiffer front end

Posted February 11th, 2012 at 11:24 PM by Gorilla25
Updated July 21st, 2012 at 01:32 AM by Gorilla25

My fork seals were leaking, so it needed changing. I also will stiffen up the front end. Im a heavier rider so i need it a little more stiff compared to stock. click for more details.


EDIT: My thread has now been merged with the replace fork seal DIY. go to post #43 on the second page to see where i started.

http://www.ninjette.org/forums/showt...ght=fork+seals
Gorilla25's Avatar
Dakine...
Posted in Uncategorized
Views 5166 Comments 4 Gorilla25 is offline

Motorcycle Safety Foundation

All times are GMT -7. The time now is 02:40 PM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2016 ninjette.org, All rights reserved.