Thread: Idle mixture screws are at different heights? (Idling/Starting Problem)
View Single Post
Old March 4th, 2016, 10:15 PM   #5
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
Quote:
Originally Posted by redsnapper View Post
why the mixture screws are not the same
They are not the same because the stock needles on a newgen are not the same. As you know, one side is richer than the other. The 2.5 turns is just a base starting point that should get your bike running. Further tuning is encouraged as needed.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School
csmith12 is offline   Reply With Quote