View Single Post
Old November 28th, 2013, 06:33 PM   #2
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
Basics brah!

Gas + air + spark

Easy checks first:
Carbs cleaned - done
Functional Petcock - check
Fuel filter - check
Strong charge on battery - check
Airbox clean - check
Air filter clean - check
Mist carb cleaner around carbs/intake boots/vac lines (vac leak check) - check

Harder:
Check spark - pull spark plug and leave connected inside boot, ground against engine case and turn it over to visually check spark (the bluer the better)
Drill plugs and turn mix screws all the way and then 2.5 turns out

Stock exhaust and jetting?
csmith12 is offline   Reply With Quote


1 out of 1 members found this post helpful.