I ordered a whole new ASSY yesterday. I should get it friday. I think this will fix my issue. I plan on doing the change this weekend. I will let you all know how it goes.
Quote:
Originally Posted by DaBlue1
Your shift lever looks like it belongs on a pre-gen (it may also just be the paint). It's also looks too straight. When it's too straight it hit's the shift rod. To miss hitting the shift rod you have to mount it lower than the shift rod. Normally it is mounted about 1/4 "" higher and parallel to the shift rod (shift rod looks messed up too). Adjust the tie rod link to where there is approx 3 " between the front tie rod lock nut to the rear lock nut.
After looking at your whole gear change assy, it believe it is one from a pregen Ninja 250. Compare yours to my pics.
This is what you need;
LEVER-ASSY-CHANGE,PEDAL
13242-0050
ROD-ASSY-TIE
39110-1075
LEVER-ASSY-CHANGE
13242-0071
You can buy new or off ebay.
|