ninjette.org - View Single Post

csmith12 · October 29th, 2014, 07:06 AM

I buy my rolls of safety wire from HF (http://www.harborfreight.com/0041-in...coil-8895.html). It's cheap and easy to work with.

When drilling for safety wire, I drill the smallest hole that the wire will go through. And buy good bits to make the job easier. Also, your gunna break a couple so buy a few before you start the job.

October 29th, 2014, 07:06 AM	#5
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	I buy my rolls of safety wire from HF (http://www.harborfreight.com/0041-in...coil-8895.html). It's cheap and easy to work with. When drilling for safety wire, I drill the smallest hole that the wire will go through. And buy good bits to make the job easier. Also, your gunna break a couple so buy a few before you start the job. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School
	1 out of 1 members found this post helpful.