100VAC is awful high, even bigger bikes normally around 70AC. I'd think your stator output wires and mid connector would be toast.
Ok, I needed to hear from you where you're measuring stator output from...yes, thats the correct place, stator plug disconnected reading the 3 (A,B,C) values, bike held revved to around 4-5000RPM. The exact volt/RPM figures should be found in a service manual for your machine.
Are you using a digital or analog meter? (could needle have been bouncing around to falsely read the 100?)
Also, please read DC volts right at the battery + and - with plug connected, too, both idle and 4-5000.
Is that where you got your 12.3-12.5 from?
Typical keyboard help, gotta repeat stuff, I know its gonna be redundant, but want to be sure.
|