ninjette.org - View Single Post

Yakaru · February 21st, 2020, 01:37 PM

I'm getting ready to get my bike race ready, and I need to safety wire -- since I use anodized titanium bolts I need to get them pre-drilled. Is there any resource that has all the bolts with full measurements since the parts fiche seems to only give partial ones (e.g. BOLT,FLANGED,16X22 while I need something that has all 3 -- M10 x (1.25mm) x 20mm )

February 21st, 2020, 01:37 PM	#1
Yakaru The Violet Vixen Name: Yakaru Location: Issaquah, WA & Las Vegas, NV Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot. MOTM - Jun '16	Bolt reference I'm getting ready to get my bike race ready, and I need to safety wire -- since I use anodized titanium bolts I need to get them pre-drilled. Is there any resource that has all the bolts with full measurements since the parts fiche seems to only give partial ones (e.g. BOLT,FLANGED,16X22 while I need something that has all 3 -- M10 x (1.25mm) x 20mm ) __________________________________________________ "most folks racing this bike get it in a competitive state of being with much less invested than you've already put in Saturn." - Alex