ninjette.org - View Single Post

ducatiman · December 26th, 2022, 08:54 AM

"However, I wonder if it's worth to spend $400 every 5k miles on a bike that is worth $2000."

thus the DIY suggestion was made

agree newgen (shims) frequency is 7500, not sure, but i beleive the OP's (@Thouse) pregen (screw and locknut) is 6000.

I'll contend doing a screw and locknut valve adjust is really not bad at all. Just take your time. And don't blow it off!

https://faq.ninja250.org/wiki/Do_I_r..._6000_miles%3F

a quote taken from the above link: That is why probably fewer than half of the Ninja 250s sold ever get their valves adjusted.

December 26th, 2022, 08:54 AM	#8
ducatiman ninjette.org certified postwhore Name: Gordon Location: new york Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot. MOTM - Nov '18, Mar '17	"However, I wonder if it's worth to spend $400 every 5k miles on a bike that is worth $2000." thus the DIY suggestion was made agree newgen (shims) frequency is 7500, not sure, but i beleive the OP's (@Thouse) pregen (screw and locknut) is 6000. I'll contend doing a screw and locknut valve adjust is really not bad at all. Just take your time. And don't blow it off! https://faq.ninja250.org/wiki/Do_I_r..._6000_miles%3F a quote taken from the above link: That is why probably fewer than half of the Ninja 250s sold ever get their valves adjusted. __________________________________________________ gordon@customcarbservices.com Custom Carb Service www.customcarbservices.com Last futzed with by ducatiman; December 27th, 2022 at 04:04 PM.