ninjette.org - View Single Post - How to shim the needles without removing the carburetors?

csmith12 · July 7th, 2012, 09:50 AM

Get one of these and your worries will be over

No touch of the diaphragms and if the magnet is strong enough, it will hold the washers in place during install of the needle. Otherwise a gentle touch and having a soft rag to lay them on will do you right.

July 7th, 2012, 09:50 AM	#2
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Get one of these and your worries will be over No touch of the diaphragms and if the magnet is strong enough, it will hold the washers in place during install of the needle. Otherwise a gentle touch and having a soft rag to lay them on will do you right. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School