View Single Post
Old June 17th, 2013, 08:20 PM   #31
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
Quote:
Originally Posted by dwright0723 View Post
I pulled the seat and tank today to get to the carb, and in my fuel line, it looked looks like there is a ziptie in there. Is that in there to keep it from collapsing or is it not supposed to be there?
Pull that out to inspect how clean it is. That is your inline fuel filter and should be there or in the carb where you pulled the hose from. When you put it back together, put the filter back into the carb, then slip the line over like it came off.

Quote:
Originally Posted by dwright0723 View Post
Also there was a nipple on the edge of the unit that the fuel gauge is connect to on the bottom of the fuel tank that wasn't connected to anything. Is that supposed to be like that?
Yes, sir. Nothing connects there.
csmith12 is offline   Reply With Quote