December 2nd, 2012, 09:30 PM | #1 |
InfoWhore
Name: Melashi
Location: 75081
Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628
|
Allen Screw Size?
Anyone know the front fender Allen screw size? There's 5 of them i think. I just bought a Front fender that i've been needing for 25$ from eBay with a some scratches, but im painting it anyway so i didn't care lol. And also bought some links to higher my bike back to original size. So i need to know the screw size so i can get them before these items come in and pt them both on at the same day, since they should be coming in at the same time.
Posted a picture to show you what piece im talking about, 2 holes on each side and one in the back (im not sure if there's one on the back, guessing).
__________________________________________________
Everyone, go buy a dirtbike hurry |
|
December 3rd, 2012, 08:50 AM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Should be 5mm homie. If I remember right, my 5mm fit kinda loose on those. 5.5mm was to large and 4.5 was to small.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
December 3rd, 2012, 08:52 AM | #3 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
5
|
|
December 3rd, 2012, 09:04 AM | #4 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
This is the schematic of your fender (Ninja 2008):
http://www.ronayers.com/Fiche/TypeID...ont_Fender(s)_ Part number 92151-1654 According to this, they should be M6X14 mm (4 units or 6 units if you substitute the two special M6 bolts that hold the reflectors (Part number 92153-1789)). Note that you will need six collars (Part number 92152-0422) and the brace (Part number 35030-0004).
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
December 3rd, 2012, 01:50 PM | #5 |
InfoWhore
Name: Melashi
Location: 75081
Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628
|
I have the brace already on the bike. I see 2 holes on the back and 4 on the side. So 6 total screws. I will not have the reflectors on (ugly). But i dont know what the collars are in that picture, are they like washers? And is it 5 mm or M6X14 mm? sorry for the noob questions lol
__________________________________________________
Everyone, go buy a dirtbike hurry |
|
December 3rd, 2012, 01:56 PM | #6 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
|
|
|
December 3rd, 2012, 02:06 PM | #7 |
InfoWhore
Name: Melashi
Location: 75081
Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628
|
Ok makes more sense. So what about the two different sizes im getting from motofool and the other posters? Is it a 14mm if im getting the collar and a 5mm if im not getting the collar?
__________________________________________________
Everyone, go buy a dirtbike hurry |
|
December 3rd, 2012, 02:22 PM | #8 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
Edit: Oh, and if you want to carry one in with you to the hardware store with you: they are the exact same collars and bolts used on the main seat. |
|
|
December 3rd, 2012, 03:40 PM | #9 |
InfoWhore
Name: Melashi
Location: 75081
Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628
|
Thanks so much Czroe! Never fail me!
__________________________________________________
Everyone, go buy a dirtbike hurry |
|
December 4th, 2012, 12:00 AM | #10 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2008+ Ninja 250 Carburetor Screw size, allen screw size! | Runeknight95 | 2008 - 2012 Ninja 250R Tech Talk | 4 | March 2nd, 2015 11:49 AM |
Carb screw allen head replacements | M42 | 1986 - 2007 Ninja 250R Tech Talk | 2 | July 27th, 2014 04:54 PM |
Stripped Allen Screw/Front fork change | ManOfGod | 1986 - 2007 Ninja 250R Tech Talk | 7 | April 30th, 2013 10:43 AM |
size of this screw? | fenwaynomar45 | 2008 - 2012 Ninja 250R Tech Talk | 4 | April 24th, 2010 06:47 AM |
steering head screw size | randomwalk101 | 2008 - 2012 Ninja 250R Tech Talk | 2 | May 4th, 2009 09:51 AM |
|
|