July 30th, 2011, 05:17 PM | #1 |
ninjette.org sage
Name: L
Location: WI
Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709
|
lowsided my ninjette
i low sided while doing some canyon carving with my buddies. it was on a decreasing radius corner at the bottom of a downhill straight. i failed to look all the way thru the turn, took my eyes off the exit and looked at the edge of the road for a split second, i ran wide and tried to lean more and apply more throttle to pull it out. but it was too late, tires hit the dirt and the bike slipped out from under me. i wore all my gear and had a little slide in the dirt/grass on my butt and left shoulder. my helmet didn't even touch the ground so that's good. so i made out ok, confidence is a little shaken, but i'll slowly work my way back up. i will make the most of this mistake and learn from it.
as for the ninjette, it's going to need some work. both fairings and tank are scratched. the top of the front cowl and my 1 week old ZG double bubble got shattered. my rear right tail fairing cracked in pieces. and my 1 week old woodcraft clip on right hand bar got bent to a 45 degree from parallel. i was able to ride it home safely. right turns were a little hard. i'm planning on painting my bike from red to white. the previous owner had dropped it on both sides, chipped the tank in various places, and did a crappy job trying to hide it. so now it gives me more of a reason to go thru with the paint job. if any body knows where I can get the front cowl and rear tail for decent prices let me know. also how do i go about getting a new woodcraft clip on aluminum bar? i ordered mine from Richard on this board. does anybody know if he is able to sell replacement bars, or is that something you gotta go thru woodcraft for. ride safe guys ATGATT! |
|
July 30th, 2011, 05:39 PM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
glad your ok! sorry bout the bike... fix it, and get back out there.
Best of luck.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
July 30th, 2011, 06:05 PM | #3 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
Sorry to hear that? Can we see pictures of the damage? Maybe we can help?
__________________________________________________
|
|
July 30th, 2011, 06:20 PM | #4 |
ninjette.org certified postwhore
Name: Cuong
Location: San Diego
Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.
|
I got replacement bars from revzilla for $13 each.
http://www.revzilla.com/product/wood...ment-bars-each |
|
July 30th, 2011, 06:55 PM | #5 |
Name: ...
Location: ...
Join Date: May 2009 Motorcycle(s): ... Posts: 999
|
|
|
July 30th, 2011, 07:41 PM | #6 |
ninjette.org Monkey Spank
Name: Kevin
Location: Illinois
Join Date: Apr 2009 Motorcycle(s): 2008 250R Track-Bike Woodcraft clip-ons and rearsets FZ-6 track bike Posts: A lot.
|
I took my bar to a local hardware store and bought a 2 foot matching piece for $4 then cut it to fit.
__________________________________________________
Black 250R Full Area P QC Dyno Jet Kit 100 main 41T Rear Sprocket |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lowsided | Old Lemon | !%@*#$%!)@#&!%@ I crashed! | 6 | April 26th, 2013 01:03 PM |
Lowsided :( | KawiKid860 | !%@*#$%!)@#&!%@ I crashed! | 7 | May 7th, 2012 10:30 AM |
Lowsided... | TheTopher | !%@*#$%!)@#&!%@ I crashed! | 9 | May 4th, 2012 08:43 AM |
I lowsided | the big mike | !%@*#$%!)@#&!%@ I crashed! | 12 | September 25th, 2011 06:49 AM |
I lowsided | n4v1n | !%@*#$%!)@#&!%@ I crashed! | 63 | August 4th, 2009 09:12 AM |
|
|