08-12 Parts I dont need! CHEAP

skilletmo · April 2nd, 2013, 02:15 PM

I have some random parts for my 08 ninja 250 that will fit 08-12. Those are all parts that i replaced and dont need anymore.

Parts:
1. Perfect condition STOCK Grips. 10$
2.~~Used condition/scratched but fully functional weighted STOCK Bar Ends. 5$~~
3.~~Perfect condition AFTERMARKET Shogun Bar Ends. 10$~~
~~4. Used condition STOCK black levers, scrapes on the ends.10$~~
5. Used condition Right Tail Fairing STOCK. It has a crack. Can be fixed easily for 0$ if you can plastic weld. its gloss metallic purple now. Paint and will look good. 5$
6. Used condition Black Left Side Cover STOCK, it is cracked on the very edge.Some tabs are missing, but attaches and is very solid on the bike. I went over 85+ with them on,. It was painted flat black because it has some duct tape residue. 10$
7. Perfect condition AFTERMARKET universal speedometer that i tried to use on the 250 and worked perfectly but i couldn't figure out the tachometer and how it works, i have notes and a guide for it i will give, its a steal if you know how to work it and are familiar with the electrics, ill give it to you for $20. Also here is the link for it: http://www.ebay.com/itm/Motorcycle-d...fc61f2&vxp=mtr
I have a thread about my whole experience too!

In the pictures you will see the levers, grips, and shogun bar ends. In the other picture with bar ends are the stock ones. In the picture of the tail fairing, you will see the crack that is on the bottom and not noticeable since it will be under the bike.The picture of the speedometer is it on my bike and obviously works (tach is a pain though to figure out, but hey only 20$). The side fairing shows the crack at the tip. If you want all the parts together i will give it for $70.

Pm me or reply on thread! The price will be what i shown plus shipping, Or local pick up. Shipping wont be more then 5$ on any of those except maybe the fairings and speedo. Please send all payments as gift via paypal when PM'd!

Things that are sold are marked in red and crossed out!If you are not satisfied i will accept returns! Thanks for looking

skilletmo · April 2nd, 2013, 02:16 PM

Here is the Right Tail Fairing, not the best of pics but whatever!

bfpower · April 2nd, 2013, 02:18 PM

I'll take the levers and the speedo. PMing for details.

csmith12 · April 2nd, 2013, 02:20 PM

Dealz! I want that gauge but I can't spend no more paper.

Jiggles · April 2nd, 2013, 02:54 PM

Quote:

Originally Posted by csmith12

Dealz! I want that gauge but I can't spend no more paper.

Try plastic

csmith12 · April 2nd, 2013, 03:00 PM

Lol, I thought of that but I have made it until nearly 40yrs old without plastic. I think I can manage a bit longer.

skilletmo · April 2nd, 2013, 03:11 PM

Quote:

Originally Posted by bfpower

I'll take the levers and the speedo. PMing for details.

Replied @bfpower.

skilletmo · April 2nd, 2013, 03:12 PM

Quote:

Originally Posted by csmith12

Dealz! I want that gauge but I can't spend no more paper.

Ya i already got my money back for that gauge but it came back to me because it didnt make it to the office or something and i dont need it so i would give it for free, but i need to cover the cost it took me to return this sucker to china. Which was 20$.

bfpower · April 2nd, 2013, 06:13 PM

Sorry for the delay, stuck at work. Money's sent for speedo, levers, and shipping.

skilletmo · April 2nd, 2013, 08:09 PM

Quote:

Originally Posted by bfpower

Sorry for the delay, stuck at work. Money's sent for speedo, levers, and shipping.

Ok, got it. Levers and speedo SOLD!

skilletmo · April 14th, 2013, 07:31 PM

bumpers

k_tran626 · April 16th, 2013, 08:41 AM

I am interested in the bar ends please!
The aftermarket one, shipping to 92868 cost

CZroe · April 16th, 2013, 10:32 AM

Damn. I would've taken the speedo.

skilletmo · April 16th, 2013, 10:47 AM

Quote:

Originally Posted by k_tran626

I am interested in the bar ends please!
The aftermarket one, shipping to 92868 cost

Ill tell you later today when im off school!

skilletmo · April 16th, 2013, 10:54 AM

Quote:

Originally Posted by CZroe

Damn. I would've taken the speedo.

Maybe of bfpower doesnt figure the tach out he can let it go to you

If I knew you would have wanted it i would have defenitley sold it to you asap, if bfpower didnt ask ofcourse either! Especially since you helped me with it too!

CZroe · April 16th, 2013, 12:25 PM

I only blame myself for being too busy to visit the forums for the last month.

skilletmo · April 16th, 2013, 12:40 PM

Quote:

Originally Posted by k_tran626

I am interested in the bar ends please!
The aftermarket one, shipping to 92868 cost

It will be 6$ shipping. So 16$ shipped!

Pm me and i will send you my paypal address if this is good for you!

Thanks

k_tran626 · April 16th, 2013, 08:11 PM

Quote:

Originally Posted by skilletmo

It will be 6$ shipping. So 16$ shipped!

Pm me and i will send you my paypal address if this is good for you!

Thanks

Pm'ed!

skilletmo · April 24th, 2013, 09:19 PM

3 parts left need em gone!

skilletmo · May 5th, 2013, 10:05 PM

bumperitadolemanoescalobumperanotuwiay

le bump

skilletmo · July 17th, 2013, 02:41 PM

bumpppp

April 2nd, 2013, 02:20 PM	#4
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Dealz! I want that gauge but I can't spend no more paper. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

April 2nd, 2013, 03:00 PM	#6
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Lol, I thought of that but I have made it until nearly 40yrs old without plastic. I think I can manage a bit longer. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

April 14th, 2013, 07:31 PM	#11
skilletmo InfoWhore Name: Melashi Location: 75081 Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628	bumpers __________________________________________________ Everyone, go buy a dirtbike hurry

April 16th, 2013, 08:41 AM	#12
k_tran626 ninjette.org member Name: Kevin Location: Orange Join Date: Jan 2010 Motorcycle(s): Ninja 250R Posts: 40	I am interested in the bar ends please! The aftermarket one, shipping to 92868 cost __________________________________________________ 250 FTW

April 24th, 2013, 09:19 PM	#19
skilletmo InfoWhore Name: Melashi Location: 75081 Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628	3 parts left need em gone! __________________________________________________ Everyone, go buy a dirtbike hurry

April 2nd, 2013, 02:18 PM	#3
bfpower ninjette.org mafioso Name: Ben Location: Dillon, MT Join Date: Jul 2012 Motorcycle(s): 2009 Ninja 250R Posts: 337	I'll take the levers and the speedo. PMing for details.

April 2nd, 2013, 06:13 PM	#9
bfpower ninjette.org mafioso Name: Ben Location: Dillon, MT Join Date: Jul 2012 Motorcycle(s): 2009 Ninja 250R Posts: 337	Sorry for the delay, stuck at work. Money's sent for speedo, levers, and shipping.

April 16th, 2013, 10:32 AM	#13
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Damn. I would've taken the speedo.

April 16th, 2013, 12:25 PM	#16
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	I only blame myself for being too busy to visit the forums for the last month.

May 5th, 2013, 10:05 PM	#20
skilletmo InfoWhore Name: Melashi Location: 75081 Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628	bumperitadolemanoescalobumperanotuwiay le bump __________________________________________________ Everyone, go buy a dirtbike hurry

July 17th, 2013, 02:41 PM	#21
skilletmo InfoWhore Name: Melashi Location: 75081 Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628	bumpppp __________________________________________________ Everyone, go buy a dirtbike hurry

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[RoadRUNNER] - Online Retailers Cheap Cycle Parts and Competition Accessories Join Fo	Ninjette Newsbot	Motorcycling News	0	February 1st, 2015 03:00 AM
[motorcycle.com] - Cheap Cycle Parts And Competition Accessories Merge	Ninjette Newsbot	Motorcycling News	0	November 17th, 2014 01:10 PM
Random pregen/classic ninja 250 parts for dirt cheap/ free.	Monkeytofu	Motorcycle-related	0	August 18th, 2012 10:52 PM
Cheap cycle parts	AMMOCAN	Motorcycle-related	16	May 7th, 2011 10:36 AM
New 08-09 Ninja 250R Parts - CHEAP!!!	RaceBikeRentals	Motorcycle-related	24	March 5th, 2010 04:43 PM