![]() |
![]() |
#1 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
Coolant drip from the valve cover gasket?
My coolant froze solid a few weeks back (no antifreeze in the coolant - thanks Red Line
![]() Thanks. |
![]() |
![]() |
![]() |
#2 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
depending on where you see the leak, you could be ok. If it is in the rear, it is more than likely from the 90 degree hose coming out of the head.
|
![]() |
![]() |
![]() |
#3 |
Participant
Name: Dave
Location: South of Seattle
Join Date: Oct 2012 Motorcycle(s): '94 K75 std Posts: Too much.
MOTM - Aug '15
|
If you're lucky,
![]() Try replacing that o-ring (less than a buck for a suitable generic one from the local auto parts store) and snugging up that hose clamp. Also say a prayer to the engine gods. Worst case, the block or head is cracked, in which case you are in trouble. No need at this point for an antifreeze tutorial... |
![]() |
![]() |
![]() |
#4 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
It's from the front left corner, looks to be from the gasket.
|
![]() |
![]() |
![]() |
#5 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Does the oil look milky?
__________________________________________________
Motofool ![]() .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
![]() |
![]() |
![]() |
#6 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
still COULD be ok, since leaking coolant from the rear may follow the gasket around and gravity would pull it to the front....but just like when I try pilates....I'm stretching here.
pull the cover and take a look. best thing to do at this time. |
![]() |
![]() |
![]() |
#7 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
Tough to tell, while it doesn't appear to be I suppose I should drain the oil into clean container to be able to tell accurately.
I've never worked on motorcycle engines, what would I be looking for besides damaged gasket? Though my gut feeling tell me that's as bad as it could get in this situation? |
![]() |
![]() |
![]() |
#8 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
You'd be able to tell if the oil is milky without putting it in another container. It's really obvious when it happens.
When you take the cover off, you should look for anything unusual, like a crack, or other evidence of where the coolant is coming from. |
![]() |
![]() 1 out of 1 members found this post helpful. |
![]() |
#9 |
Participant
Name: Dave
Location: South of Seattle
Join Date: Oct 2012 Motorcycle(s): '94 K75 std Posts: Too much.
MOTM - Aug '15
|
How does the oil look in the sight glass?
|
![]() |
![]() |
![]() |
#10 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
|
![]() |
![]() |
![]() |
#11 |
Participant
Name: Dave
Location: South of Seattle
Join Date: Oct 2012 Motorcycle(s): '94 K75 std Posts: Too much.
MOTM - Aug '15
|
Good if the oil appears normal. Coolant infused oil looks similar to a chocolate milkshake.
|
![]() |
![]() 1 out of 1 members found this post helpful. |
![]() |
#12 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
Seems like we have some good news here. I pulled the cover last night and there is absolutely no sign of coolant in the oil. There was coolant on the back of the cover (towards the battery), but I am 99% sure that it was coming from the coolant pipe that is in the back of the cover and it was making its way forward due to block being tilted. When I wiggle the pipe, I could clearly see a wet spot there. Too bad Partzilla takes forever to ship! Oh well, I may as well do a valve adjustment while I am there, sitting at 13xxx miles now, I am not sure if it ever was done.
Thanks to all who chimed in - I greatly appreciate it! |
![]() |
![]() 1 out of 1 members found this post helpful. |
![]() |
#13 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
oh gosh, partszillla you might be waiting tell next year there normally slower at shipping than motomummy (which clearly does have a mummy working in the shipping department).
|
![]() |
![]() |
![]() |
#14 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
Partzilla lists a lot of stuff they don't stock, so when you order it, they have to place an order with their wholesaler, see if it's available, then maybe ship it if it is. Sometimes you get lucky with them though. It may be best to verify stock with their customer service department before actually placing an order.
|
![]() |
![]() |
![]() |
#15 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
Good: tackled the O ring (was totally flat), did the valve adjustment while there (gaps were too tight), replacing valve cover gasket & spark plugs. Decided to change oil and filter while there and this is where BAD starts: oil looked funny, few milky/mayo spots
![]() Thanks. |
![]() |
![]() |
![]() |
#16 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
Changing the oil and running it for a while would tell if coolant is still getting in. I'm not familiar enough with the particular leak you had to know if it could have released coolant into the oil. If so, and you fixed that leak, you could be OK now.
|
![]() |
![]() |
![]() |
#17 |
ninjette.org member
Name: Brad
Location: Cincy
Join Date: Feb 2017 Motorcycle(s): Zrx1100,ZRX1200, C14, CRF100's,KLX400 Posts: 50
|
don't worry about that green fluid ..... it's just Kawasaki blood
|
![]() |
![]() |
![]() |
#18 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
^ I kind of wish it was green.
Things aren't looking good. Oil level window filled up with milky stuff after a few laps around the block. Head gasket time? Any good DIYs out there? Thanks. |
![]() |
![]() |
![]() |
#19 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
Did you get the engine good and hot? If there is some residual moisture in the oil, it won't be gone until you get the engine fully hot for a while.
I'm not trying to get you to run the engine excessively if you really think coolant is still getting in the oil! |
![]() |
![]() |
![]() |
#20 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
Actually I did not. It is impossible to get it hot now: it went over the first mark from cold while sitting, but dropped back closer to C once I got rolling - just too cold to ride for prolonged periods. It runs fine though, so I am still hopeful I guess?
|
![]() |
![]() |
![]() |
#21 |
Participant
Name: Dave
Location: South of Seattle
Join Date: Oct 2012 Motorcycle(s): '94 K75 std Posts: Too much.
MOTM - Aug '15
|
Change the oil.
Say a prayer. Start it up, take it for a ride, get it nice and warmed up. Check the oil for chocolate milk. If the oil is clean, you're ok. If chocolate milk, best outcome is a bad head gasket. Otherwise, it's a cracked head or cracked block. |
![]() |
![]() |
![]() |
#22 | |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
![]() Quote:
The damage due to expansion, in form of a crack, could be anywhere in the cooling system where metal is in contact with coolant/ice. Soft parts like hoses, gaskets and seals can support that expansion with less damage. Hence, the leak is not necessarily in the gasket between cylinders and head. Detecting the possible area of leak in order to decide what to do is going to be difficult. There are ways to pressurize the system without risking damaging the main bearings due to oil contamination. Have you noticed any leak coming from the body of the coolant pump?
__________________________________________________
Motofool ![]() .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
![]() |
![]() |
![]() |
#23 | |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
Thanks.
No, I don't recall seeing any leaks other than that run from the O ring of the pipe where it enters the head in the back. Quote:
|
|
![]() |
![]() |
![]() |
#24 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
Update: took the bike out for a good 1/2 ride, let the bike sit and idle for ~5 minutes after I came back, temp started to rise, but didn't get past 12 o'clock. Shut it off, and drained oil + took filter out into a clean pan: no signs of coolant
![]() |
![]() |
![]() 1 out of 1 members found this post helpful. |
![]() |
#25 | |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
![]() Quote:
![]() ![]() ![]()
__________________________________________________
Motofool ![]() .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
![]() |
![]() |
![]() |
#26 |
Participant
Name: Dave
Location: South of Seattle
Join Date: Oct 2012 Motorcycle(s): '94 K75 std Posts: Too much.
MOTM - Aug '15
|
Sounds like your lucky day!
|
![]() |
![]() |
![]() |
#27 |
ninjette.org member
Name: Igor
Location: Salem, MA
Join Date: Feb 2016 Motorcycle(s): '04 Ninja 250 Posts: 51
|
Keeping my fingers crossed! Big thanks for the support of this community
![]() |
![]() |
![]() |
![]() |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Head Gasket or Coolant Pipe Leak | VaFish | 1986 - 2007 Ninja 250R Tech Talk | 14 | June 22nd, 2017 03:04 AM |
Gasket Thickness Valve Clearance | HoneyBadgerRy | 1986 - 2007 Ninja 250R Tech Talk | 4 | October 19th, 2015 06:16 PM |
valve cover gasket | drewsley | 1986 - 2007 Ninja 250R Tech Talk | 8 | August 21st, 2014 04:59 PM |
Changed coolant - drip from left exhaust | gp55445 | 1986 - 2007 Ninja 250R Tech Talk | 7 | September 15th, 2013 05:03 PM |
New sprocket installed - alignment? Coolant drip? | tsdexter | 2008 - 2012 Ninja 250R Tech Talk | 3 | July 20th, 2013 02:08 PM |
|
|