April 15th, 2017, 09:22 AM | #1 |
One ugly son of a gun.
Name: Andrew
Location: Raleigh, NC
Join Date: Sep 2016 Motorcycle(s): 2012 250 Posts: 167
|
Stock Exhaust mount question
So I replaced my stock exhaust with an area P and am trying to put the stock back on for a while (the area P is just toooo loud). There is a 10mm bolt about halfway down from the headers to the tip of the exhaust and I cant figure out where it mounts to. Can someone please help?? Basically there are 3 mount points... the headers, the large bolt on the muffler, then this one I cant figure out. Please help me out, I'm an idiot and don't see where it goes.
|
|
April 15th, 2017, 11:32 AM | #2 |
One ugly son of a gun.
Name: Andrew
Location: Raleigh, NC
Join Date: Sep 2016 Motorcycle(s): 2012 250 Posts: 167
|
I can't see anywhere under the bike for it to mount to, I'm afraid there is a piece I took off that I am missing and need to find. I want to put the stock exhaust back on today, but don't want to run it without all points mounted correctly...
|
|
April 15th, 2017, 11:42 AM | #3 |
One ugly son of a gun.
Name: Andrew
Location: Raleigh, NC
Join Date: Sep 2016 Motorcycle(s): 2012 250 Posts: 167
|
Nevermind, I found it. There was a washer I was missing. It mounts to a point on the frame with a rubber o-ring to keep the vibration down. I didn't see how the bolt would fit without slipping out but it needs a washer on the other side and I found it. Case closed.
|
|
April 15th, 2017, 11:51 AM | #4 |
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
Cool. I was going to try to help, but noticed you were talking about a newgen. Glad you figured it out.
|
|
April 15th, 2017, 03:52 PM | #5 |
ninjette.org certified postwhore
Name: Kerry
Location: Ventura, CA
Join Date: Jan 2016 Motorcycle(s): Ninja650 Posts: A lot.
MOTM - Apr '18, Apr '17, Apr '16
|
Glad you figured it out!
|
|
April 15th, 2017, 09:34 PM | #6 |
One ugly son of a gun.
Name: Andrew
Location: Raleigh, NC
Join Date: Sep 2016 Motorcycle(s): 2012 250 Posts: 167
|
Thanks guys (and gal)! Yeah now that I can hear my motor again I have what sounds like a wicked vacuum leak. I'm gonna have to track that down tomorrow when I rejet the carbs again. Wish me luck!
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question about stock exhaust | sickopsycho | 1986 - 2007 Ninja 250R Tech Talk | 24 | November 22nd, 2016 03:45 PM |
FS: Area-P solo exhaust bracket for Ninja 300 w/stock exhaust | c-dog | Motorcycle-related | 2 | September 12th, 2014 10:48 AM |
Question about removing stock exhaust baffle | KenOnABike | 2008 - 2012 Ninja 250R Tech Talk | 8 | June 6th, 2012 02:13 PM |
go pro sticky mount question | massacremasses | General Motorcycling Discussion | 16 | February 13th, 2012 07:32 AM |
WTB: Stock rear links and stock exhaust for 2008 | bluninja08 | Items Wanted | 1 | July 14th, 2011 10:21 AM |
|
|