June 4th, 2020, 06:29 PM | #1 |
ninjette.org member
Name: Frederic
Location: Quebec City
Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 56
|
My Race 250 Finally Ready
Some pic of my just finished race 09 250. I'm pretty happy with the end result.
DSC_3089.jpg DSC_3090.jpg DSC_3091.jpg DSC_3092.jpg DSC_3093.jpg DSC_3094.jpg DSC_3095.jpg |
|
June 4th, 2020, 06:39 PM | #2 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Very cool!
What mods did you do? |
|
June 4th, 2020, 06:54 PM | #3 |
ninjette.org member
Name: Frederic
Location: Quebec City
Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 56
|
Fork: 08 zx-10r internals, 2.5w oil, 0.9 kg/mm racetech springs.
https://www.ninjette.org/forums/showthread.php?t=344917 Shock: 06 gsx-r 600 raised rear 30mm with self made links Front brake : Tokico caliper, ktm duke 690 r Mater Cylinder, ss line, SV Racing caliper bracket. https://www.ninjette.org/forums/showthread.php?t=345146 Gauges: Chinese Koso replica, self made bracket. Steering damper: OEM Busa with 20w oil https://www.ninjette.org/forums/show...5&postcount=11 Handles: Driven Clip ons, Chinese levers Piston: 2007 OEM piston (180 psi cold compression) CDI: 2007 OEM CDI + self made harnes https://www.ninjette.org/forums/show...7&postcount=14 Intake: K&N filter, with #110 jets, -3 turns on idle screws, 4 washers to raise the needles (2.3mm) Exhaust: Stock manifold + shorten Yosh slip on. Tires: 110 70 17 + 140 70 17 Pirelli Supercorsa SC1 That's about it. The bike is surprisingly strong, I would like to dyno it to know how much it makes. My first test on track is on June 13th. I can't wait. Last futzed with by Fred659; June 29th, 2020 at 06:21 PM. Reason: added links |
|
June 4th, 2020, 09:16 PM | #4 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Yeah, would really be cool to see dyno. Make sure to get AFR curve plotted on same graph!
|
|
June 5th, 2020, 04:39 AM | #5 |
ninjette.org member
Name: Frederic
Location: Quebec City
Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 56
|
I don't know if I will have a chance to do it soon though.
My goal is to overtake some guys on 600 and 1000 on the brakes at my local track. I already have a beast of a zx-10r so I think it will be fun to push a small bike very fast. |
|
June 5th, 2020, 11:56 AM | #6 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
yeah, so much fun overtaking those guys!!!
|
|
June 6th, 2020, 10:54 AM | #7 |
ninjette.org member
Name: Eric
Location: Las Vegas
Join Date: May 2020 Motorcycle(s): 2012 Kawasaki Ninja 250 / 2004 Yamaha YZF-R6 / 2006 Yamaha R6 (track bike) / 2014 Ducati 1199s Posts: 45
|
Very nice build! It's the same with me, I have bigger bikes but I always enjoy pushing small bike fast!
|
|
June 7th, 2020, 09:59 AM | #8 |
ninjette.org member
Name: Keith
Location: Gardner KS
Join Date: Oct 2014 Motorcycle(s): 2014 Ninja 300 Posts: 52
|
Nice build. Really cool setup with your forks. Should be a super fun ride. You might start dragging pegs pretty quick with out risers though. Pegs touching isn’t a huge deal since they fold. Very soon after they touch your rear brake and shift lever touch as well. They don’t fold.
|
|
June 7th, 2020, 10:50 AM | #9 | |
ninjette.org member
Name: Frederic
Location: Quebec City
Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 56
|
Quote:
I will be carefull on my first couple of runs. if its a problem. I'll buy some rear sets. Thanks for the comments. |
|
|
June 29th, 2020, 03:45 PM | #10 |
ninjette.org member
Name: Frederic
Location: Quebec City
Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 56
|
I've done my first track day with the "Beast". the bike is super planted, telepathicaly flickable and the brakes are amazing. I ended by adding 4 washers under the needles (2.3mm total) and the mid is great.
Here's a video of me and my students this sunday. I'm 9 seconds off my zx-10r pace, but the strait is sooooooooo long (hahaha) Enjoy. https://www.youtube.com/watch?v=FJhnPRaVWOE Last futzed with by Fred659; June 29th, 2020 at 04:51 PM. |
1 out of 1 members found this post helpful. |
June 29th, 2020, 04:41 PM | #11 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
June 29th, 2020, 04:54 PM | #12 |
ninjette.org member
Name: Frederic
Location: Quebec City
Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 56
|
|
|
June 29th, 2020, 05:53 PM | #13 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
wow, effrayant
|
|
June 29th, 2020, 06:00 PM | #14 |
ninjette.org member
Name: Frederic
Location: Quebec City
Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 56
|
|
|
June 29th, 2020, 06:12 PM | #15 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
YES!!! And tyres... and haybales...
|
|
June 29th, 2020, 06:19 PM | #16 |
ninjette.org member
Name: Frederic
Location: Quebec City
Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 56
|
|
|
June 29th, 2020, 06:26 PM | #17 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
It's very nice and challenging track! I like it. I have organized many races and see the dangers.
In U.S., we have to worry about idiots injuring themselves and suing. Last year, Keigwins was bankrupted by rider with more money than skill. He crashed at Laguna Seca, was injured and sued. Horrible! What does it cost to entre trackday at Autodrome St Félicien? I may have to try it when I'm visting my aunt and grand-ma in Montréal and Quebec City.. Last futzed with by DannoXYZ; June 29th, 2020 at 08:03 PM. |
|
June 30th, 2020, 06:36 AM | #18 | |
ninjette.org member
Name: Frederic
Location: Quebec City
Join Date: Jan 2020 Motorcycle(s): 08 Race Prepped ZX-10r, 09 Race Prepped Ninja 250 (300 motor). 74 Norton Commando 850 (Project) Posts: 56
|
Quote:
after that, it's $345. St-Félicien is a single annual event always around Canada Day (July First). We have some other track days this year near Quebec City at RiverSide Speedway (Ste-Croix) : August 8th, September 5th and 6th. 10:00 am to 6:00 pm If you book and pay in advance (at least 10 days before the event) it's $230 CAD per day. After that, it's $260. here's a video of me (2014) at Ste-Croix. it's a fun but short and physically demanding track. it was the Superbike style start session at the end of the day. https://www.youtube.com/watch?v=Dnf8UZxxpBE
Link to original page on YouTube. |
|
|
June 30th, 2020, 07:54 AM | #19 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
I plan on visiting my grand-ma as soon as allowed after this COVID-19 thing goes away!
I really like tight challenging tracks. So much fun! |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gantt is finally getting the little ninja ready to ride | gantt | 2008 - 2012 Ninja 250R Tech Talk | 49 | August 27th, 2018 09:48 AM |
[motorcycledaily.com] - Is Benelli Finally Ready to Deliver New Large Displacement Mo | Ninjette Newsbot | Motorcycling News | 0 | April 28th, 2016 07:30 PM |
[topix.net] - Is the 2011 Zero DS finally ready for public consumption? | Ninjette Newsbot | Motorcycling News | 0 | June 25th, 2011 01:30 AM |
[hell for leather] - Is the 2011 Zero DS finally ready for public consumption? | Ninjette Newsbot | Motorcycling News | 0 | June 25th, 2011 01:30 AM |
Bike finally ready to rock and roll | krbreton | General Motorcycling Discussion | 3 | June 18th, 2009 10:00 AM |
|
|