March 8th, 2022, 08:40 PM | #1 |
ninjette.org member
Name: Rich
Location: NE
Join Date: Nov 2021 Motorcycle(s): 1994 EX500, 2006EX250 Posts: 12
|
Help?
Old biker here, new owner of basket case '06 EX250. I truly didn't know what I was getting in to when I bought this bike last fall. '06, low miles, what could be wrong? Too much, WAY too much! I'm finally getting it back together, but I'm lost about how the wiring on the right side of frame should run/look. I've looked but haven't found what I'm looking for. Can someone post a close-up pic of the right side with the side cover off? Something doesn't look right to me the way I've got it. Thanks!
|
|
March 9th, 2022, 08:38 AM | #2 |
ninjette.org guru
Name: Drew
Location: SoCal
Join Date: Jul 2013 Motorcycle(s): 2007 SV650S 2005 EX250F Posts: 487
|
This is the best I have in my folder here, I could get a better one later today if you need something specific. What are you having trouble with?
__________________________________________________
Don't think, look! |
|
March 9th, 2022, 09:39 AM | #3 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Everything pretty much hugs upper frame-tubing. What's not threading through properly on yours? Post photo and we can compare.
|
|
March 9th, 2022, 08:56 PM | #4 |
ninjette.org member
Name: Rich
Location: NE
Join Date: Nov 2021 Motorcycle(s): 1994 EX500, 2006EX250 Posts: 12
|
Thanks for responding! In order to get the tail & brake light wires back there, and connect to the rectifier, I've got a big knob of harness sticking out, the rectifier to harness being the biggest mess. I'll try to get a pic in the AM: too late now. Thanks again!
|
|
March 10th, 2022, 08:28 AM | #5 |
ninjette.org member
Name: Rich
Location: NE
Join Date: Nov 2021 Motorcycle(s): 1994 EX500, 2006EX250 Posts: 12
|
Pic
No matter what I do, the image comes in upside down. I even took the original image and rotated it 180° and it's still upside down.
|
|
March 10th, 2022, 03:38 PM | #6 |
ninjette.org guru
Name: Drew
Location: SoCal
Join Date: Jul 2013 Motorcycle(s): 2007 SV650S 2005 EX250F Posts: 487
|
That plug does stick out a bit if memory serves... it just gets hidden under the fairing. Mine is different now that I swapped out my old regulator for a new one, but I think you have it right. Can you fit the fairing on?
__________________________________________________
Don't think, look! |
|
March 10th, 2022, 08:43 PM | #7 |
ninjette.org member
Name: Rich
Location: NE
Join Date: Nov 2021 Motorcycle(s): 1994 EX500, 2006EX250 Posts: 12
|
Thanks! It does fit, but it just doesn't look right. Guess I'll leave well enough alone!
|
|
March 15th, 2022, 03:49 AM | #8 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/moved to pre-gen tech
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
March 15th, 2022, 06:19 AM | #9 |
ninjette.org member
Name: Brett
Location: Perth, Australia
Join Date: Feb 2022 Motorcycle(s): GPX250R 2006 Posts: 23
|
Some photos, let me know if you need more.
|
|