April 7th, 2023, 09:15 PM | #1 |
ninjette.org newbie
Name: Elias
Location: Moreno Valley
Join Date: Mar 2023 Motorcycle(s): 2011 ninja 250 Posts: 7
|
Bike dies when I turn choke on
I had an issue awhile back that it wouldn't accelerate past 50 so someone told me I gotta pull the carbs and clean them and that worked and now it goes way past that but now the choke doesn't work, it just kills the bike whenever I turn it on and whenever I come to a stop with clutch in for the first like 5 or 10 minutes while I'm riding it the idle just drops and it dies, I tried turning the pilot jet screws out a bit it didn't do anything mahbe I should turn them in more? Right now I have it at 2 and a half turns out which should be the basic setting but the choke still kills the bike unless I have the idle adjustment screw all the way out?
|
|
April 8th, 2023, 05:55 AM | #2 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
after 5 or 10 minutes of riding (?) choke unneccesary, bike should be warm enough to idle on its own.....otherwise....choke circuits need full clearing, from its fuel pickups to air pickup. Can sometimes be quite bitchy to clear....requiring full blasts of compressed air, min 125 psi.
__________________________________________________
Custom Carb Service |
|
April 8th, 2023, 08:47 AM | #3 | |
ninjette.org newbie
Name: Elias
Location: Moreno Valley
Join Date: Mar 2023 Motorcycle(s): 2011 ninja 250 Posts: 7
|
Quote:
|
|
|
April 8th, 2023, 10:28 AM | #4 |
ninjette.org certified postwhore
Name: Gordon
Location: new york
Join Date: Sep 2009 Motorcycle(s): '95 DUCATI 900SS/SP '07 DUCATI SS800 '19 HONDA CBR650R Posts: A lot.
MOTM - Nov '18, Mar '17
|
During your cleaning did you FULLY disassemble/split carbs, choke units and ALL? Remove pilot screws? Replace with all new orings/gaskets?
__________________________________________________
Custom Carb Service |
|
April 8th, 2023, 11:13 AM | #5 | |
ninjette.org newbie
Name: Elias
Location: Moreno Valley
Join Date: Mar 2023 Motorcycle(s): 2011 ninja 250 Posts: 7
|
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Won't run without choke and dies when given throttle | Kryptykcloudz | 2008 - 2012 Ninja 250R Tech Talk | 32 | July 20th, 2021 10:33 AM |
09 250r dies on choke - with video. Cleaned carbs. Wtf | Bury_your_hands | 2008 - 2012 Ninja 250R Tech Talk | 8 | June 14th, 2015 07:23 PM |
Bike dies w/o choke | rasta | General Motorcycling Discussion | 11 | June 13th, 2014 03:43 AM |
Bike dies with choke after not storing properly... | seamuswh | 2008 - 2012 Ninja 250R Tech Talk | 2 | May 15th, 2012 10:47 PM |
Help!! Bike not running without choke | gaby | 2008 - 2012 Ninja 250R Tech Talk | 11 | October 12th, 2011 07:15 PM |
|
|