May 27th, 2010, 09:55 AM | #1 |
ninjette.org member
Name: Paul
Location: Franklin, MA
Join Date: May 2010 Motorcycle(s): '09 Ninja 250R Black Posts: 12
|
Downshifting Problems
Okay so, I have been riding for about a year now but I have to admit I still don't think I have downshifting down at all.
I don't downshift until 5kish RPM and I've been told two things to do while downshifting 1. Do not blip the throttle, just pull in the clutch, downshift, and release. This method feels really rough and jerky most of the time (kind of pushes me forward) and I'm wondering if it's too hard on the engine. 2. Try and rev the throttle as you release the clutch after the down shift. Honestly with this I usually am downshifting because I need to slow down and I don't think I can find the right amount of throttle to give it because the shift is either too much or not very smooth at all (maybe releasing the clutch too slow? How fast would you say to release it using this method?) Up shifting is fine I think (Usually shift at 8-12k RPM) and is smooth. Any help would be awesome, I feel really comfortable on my bike and with most basic maneuvers on it. But this problem with downshifting is really frustrating |
|
May 27th, 2010, 10:02 AM | #2 | |
.
Name: rock
Location: greenville, south carolina
Join Date: Jun 2009 Motorcycle(s): black Posts: A lot.
|
Quote:
__________________________________________________
Always get a second opinion because most of these people are makin' this stuff up |
|
|
May 27th, 2010, 10:05 AM | #3 |
ninjette.org member
Name: Alex
Location: Santa Barbara
Join Date: May 2010 Motorcycle(s): Red 2010 Ninja 250R Posts: 15
|
neoki, i had the exact same problem with my new bike the first couple of days...it takes a while to get the feel for it, usually when i'm coming up to a stop sign or light i keep constant pressure on the front break and rear break until the rpms are like 3-4k then i start to downshift. it goes really quickly something like clutch in, ds, ci, ds, ci, di, ci, di until i get to 1st. Engine breaking is not necessarily a bad thing i have heard, but that "forward lurch" can be a little disconcerning at times...ive definitely been there...
|
|
May 27th, 2010, 10:10 AM | #4 |
ninjette.org member
Name: Scott
Location: KS
Join Date: Jan 2010 Motorcycle(s): '09 EX250J, '01 CBR600F4i Posts: 53
|
Are we talking downshifting for a turn or downshifting to come to a stop? Most of the time when coming to a stop I will pull the clutch and coast to the red light/stop sign etc. and gradually shift down until I am <10 mph, then put it into 1st. You don't want to jump down to first when you're moving too fast, it makes a clunk sound that I think means the transmission isn't too happy.
If you want to engine brake then you should be rev-matching with each gear you go down. At a given speed the engine rpm will be higher when in a lower gear, so to avoid that "lurch" you are talking about you should give the throttle a blip before you release the clutch. This is better on your clutch and drivetrain in general. Letting the clutch out without rev matching is a bad habit and is NOT recommended on a bigger bike without a slipper clutch. Doing it in the really high rpms can throw you from the bike or make your rear tire come out in a turn because the "lurch" is so severe. Lastly engine braking isn't really going to kill your engine, but you shouldn't use it to slow down so much. That's what brakes are for! Other veterans please correct me if I'm wrong above. |
|
May 27th, 2010, 10:17 AM | #5 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
I blip the throttle and in turn have smooth downshifts. This also keeps me in a RPM range where I am ready to accelerate again if needed. The blip and downshift is fast and is something that should come with seat time.
How much seat time (mileage) do you have for the year you have clocked?
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
May 27th, 2010, 10:25 AM | #6 |
ninjette.org certified postwhore
Name: Travis
Location: Warwick, RI
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250R Posts: A lot.
|
If you are not blipping the throttle take a long time to let out the clutch when slowing. This will help to smooth things out.
With the ninjette bliping is not necessary, but it does help to make things smoother if you do it right. Engine braking is not going to hurt your bike. It is the same thing as taking your foot off of the accelerator in your car and coasting to reduce speed.
__________________________________________________
Addicted to anything that has an engine and rolls. |
|
May 27th, 2010, 10:33 AM | #7 |
ninjette.org member
Name: Paul
Location: Franklin, MA
Join Date: May 2010 Motorcycle(s): '09 Ninja 250R Black Posts: 12
|
|
|
May 27th, 2010, 10:44 AM | #8 |
ninjette.org certified postwhore
Name: Travis
Location: Warwick, RI
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250R Posts: A lot.
|
It is a good habbit to be in. If you have a larger engine and do not blip the throttle to match the revs, you COULD cause a rear wheel skid. My old pick-up would do this. In four wheels it is no big deal, but in two it can be devistatingly dangerous.
(remember I said "could" not will).
__________________________________________________
Addicted to anything that has an engine and rolls. |
|
May 27th, 2010, 10:51 AM | #9 | |
ninjette.org newbie
Name: Orson
Location: Detroit
Join Date: Apr 2010 Motorcycle(s): 2006 ex250 Posts: 2
|
Quote:
Blipping the throttle while downshifting is not as hard as it sounds. Practice it. You don't need to be precise or hold the throttle open. You just learn to give the throttle a little kick while you pull the clutch in. To give you an idea, aim for approximately 25% throttle blip. The entire throttle blip should be 1/3 of a second - 0 to 25% back to 0 in 1/3 of a second. Even if done poorly, its better than not doing it at all. Realistically, I think that one learns to do this as a few quick simultaneous operations: 1) simultaneously pull clutch, push down on shifter, and open throttle 2) simultaneously release clutch, release shifter, and release throttle |
|
|
May 27th, 2010, 10:59 AM | #10 |
ninjette.org member
Name: Paul
Location: Franklin, MA
Join Date: May 2010 Motorcycle(s): '09 Ninja 250R Black Posts: 12
|
thanks, all of this is really helpful. cant wait to get out of work and practice
|
|
May 27th, 2010, 12:11 PM | #11 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
i learned throttle blipping in my car (since it has a ****** tranny and wont downshift+brake without it)... it might be easier to learn on a car since you dont have to worry about breaking loose on the rear...
i don't know why anyone would blip as you're engaging the clutch... i would think that would make the bike jump forward too much when you're trying to stop IMO and cause too much weight transfer back and forth. i blip just before i begin engaging the clutch so that right as it starts engaging, theres no throttle on and the RPMs are just starting to drop... just my take i guess. good luck
__________________________________________________
|
|
May 27th, 2010, 06:01 PM | #12 |
ninjette.org sage
Name: don
Location: Port Elgin NB Canada
Join Date: May 2009 Motorcycle(s): 2009 blue ninja 250R Posts: 742
|
I also learned blipping or double clutching in a car. You let out the clutch for an instant while the transmission is going through neutral as you shift gears. On those old high revving 4 cylinder engines it made shifting easier and kept the revs up into the good torque range.
It became a matter of getting the rhythm of it and the same rhythm works on the bike although you obviously don't double clutch. Last futzed with by lockie; May 27th, 2010 at 09:04 PM. |
|
May 27th, 2010, 06:44 PM | #13 |
Mr. 988
Name: Jeff
Location: Sandy, Utah
Join Date: Aug 2009 Motorcycle(s): One Posts: A lot.
Blog Entries: 1
|
When I blip and downshift I only use two fingers on the clutch and the rest are on the grip. This way your fingers act as a "stop" and will not let the clutch all the way in.
Motorcycle clutches are not like car clutches. They are made to be slipped. There is no need to completely de-clutch when shifting. Use that friction zone to your advantage. Watch Rich Alexander's clutch work and notice how lightly he uses the clutch: |
|
May 27th, 2010, 07:06 PM | #14 |
ninjette.org certified postwhore
Name: Lil One
Location: NB Canada
Join Date: Mar 2009 Motorcycle(s): '09 Ninja 250 Black Posts: A lot.
|
I noticed he's not using the clutch to upshift. How does he do that? Just lay off the throttle when he upshifts?
__________________________________________________
I'm not small, I'm fun sized |
|
May 27th, 2010, 07:09 PM | #15 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
as you're pushing the shift lever up (or down if its gp style), drop the throttle a bit until it engages. for going down, blip the throttle up until it engages while holding the shifter.
__________________________________________________
|
|
May 29th, 2010, 07:38 AM | #16 |
ninjette.org member
Name: Andrew
Location: Fairfax, VA
Join Date: Apr 2009 Motorcycle(s): '06 Yellow 250r Posts: 211
|
I'm also trying to learn downshifting, and I think the biggest help to me has just been listening to the engine and trying to keep the sound as consistent as possible.
Here's a little MS-paint graph I made that's probably incredibly over-exaggerated, entirely not-to-scale and very likely wrong, but it's how I see blipping, if you're looking at RPMs over time: (Forgive my ten-o'clock-in-the-morning-and-drawing-on-a-touchpad artistic skills.) Is that at least somewhat in the ballpark? |
|
May 29th, 2010, 11:05 AM | #17 |
ninjette.org certified postwhore
Name: Steve
Location: Kekaha, Kauai HI
Join Date: Jan 2009 Motorcycle(s): 05 GSX-R 600 2003 EX250: Woodcraft Bars, Levers, Mirrors, Shim'd Mixture, Synthetic, '08 Rear Shock Posts: A lot.
|
i'became a blipper through progression via rev-matching
i use the engine to slow the bike coming to a stop which i think personally this bike does well, and blipping for braking works fine for me practice and keep it smooth
__________________________________________________
Remember when sex was safe and motorcycles were dangerous? |
|
May 29th, 2010, 02:21 PM | #18 |
Livin' the Minimoto Life
Name: Mark
Location: Riding around in TX
Join Date: Mar 2009 Motorcycle(s): 2022 Honda Navi, 2018 Z-125 Pro Posts: A lot.
|
The first time I did clutchless upshifts was when I purchased my first bike. I was riding it home (complete newb) and had pressure on the shifter. I heard about the shifting method and knew how to do it, just never did it. Cut off the gas real quick, it clicked into gear, and then I became hooked.
Downshifting is something I never bothered learning until I really became interested in track days. I knew I'd need to know it to slow down and keep things smooth. I gave it a try, and within a week I had it down pat. The key for me was mastering the "blip" and the front brake work. It really is an art. Now I do it everywhere I go, no matter if I'm playing around or just cruising. I do it out of habit now. Needless to say I can stop the bike dang quick now and will have it in a proper gear if I need to punch it for some reason.
__________________________________________________
--- My IG Page --- My FB page! --- 2022 Honda Navi && 2018 Z-125 Pro |
|
May 29th, 2010, 02:26 PM | #19 |
Join Date: Nov 2008 Posts: Too much.
|
more input...
http://www.ninjette.org/forums/showthread.php?t=21988 |
|
May 29th, 2010, 08:47 PM | #20 |
I'm lovin' it.
Name: Mike
Location: Melb, Australia
Join Date: Feb 2009 Motorcycle(s): '09 Black 250R Posts: A lot.
|
Well I use 2 fingers on the front brake while rev-matching when downshifting. Keeps things nice and smooth.
__________________________________________________
Son: When I grow up I want to ride a motorbike. Father: You can't do both son. |
|
May 31st, 2010, 01:48 PM | #21 |
ninjette.org guru
Name: Jessica
Location: Calgary, Canada
Join Date: Jul 2009 Motorcycle(s): '09 Metallic Diablo Black Posts: 298
|
Do you have a picture/video or something that shows how this is done? I can't really picture how to operate the throttle AND the front brake simultaneously, unless I'm simply just letting go of the throttle altogether... A little bit of a turn and my fingers don't even reach the brake anymore.
|
|
June 1st, 2010, 10:39 AM | #22 |
Mr. 988
Name: Jeff
Location: Sandy, Utah
Join Date: Aug 2009 Motorcycle(s): One Posts: A lot.
Blog Entries: 1
|
Pictures
Sport Rider Article on blipping
And some photos swiped from the Internet - Google is your friend. Grip before braking Grip while braking Overhead shot |
|
June 1st, 2010, 12:01 PM | #23 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Downshifting Probs | indr | 2008 - 2012 Ninja 250R Tech Talk | 15 | June 30th, 2013 09:43 AM |
Downshifting for turns | dcx4610 | Riding Skills | 106 | October 24th, 2012 01:31 PM |
Downshifting | akshay11 | Riding Skills | 17 | March 18th, 2012 02:52 PM |
Downshifting for a right turn. | clintalmighty | Riding Skills | 21 | January 20th, 2011 11:27 AM |
proper downshifting? | heylookitsfranco | Riding Skills | 23 | October 31st, 2010 06:31 PM |
|
|