July 6th, 2010, 11:27 AM | #1 |
ninjette.org member
Name: Neville
Location: MALTA (EU)
Join Date: May 2010 Motorcycle(s): ninja 250, vespa gts 300 Posts: 19
|
PLM exhaust system
Just bought a full PLM from Ebay motors and I'm as happy as a pig in s**t with it. The downpipes fit with absolutely no hassle and the clearance is excellent - it's not close to the fairing at all so there are no risks of melting it and the clearance between the swinging arm and the can is just right.
It's a bit loud though so I may buy a dB killer or have one made. My Power Commander was set-up for the LeoVince slip-on I had before and I haven't taken the bike for a new tune up yet but even with the current setting the gain in power is pretty noticeable especially mid-range and top end. I haven't seen a better top speed but I'm getting there faster - for the first time since I've had the 250 I've hit 165 on a particular road I frequent where before I could get just over 150. Don't care if the speedo is accurate - point is that the bike is hitting a higher speed from point A to B so the system is certainly doing its job. Highly recommended. |
|
July 9th, 2010, 12:41 PM | #2 |
ninjette.org member
Name: kenny
Location: nyc
Join Date: May 2010 Motorcycle(s): 250r Posts: 77
|
Yes very loud. Got one on my bike
|
|
July 9th, 2010, 03:33 PM | #3 |
ninjette.org certified postwhore
Name: Sam
Location: Northern Virginia
Join Date: Nov 2008 Motorcycle(s): Ninja 250R 2009 and ZX-12R 2000 Posts: A lot.
|
Neville,
Welcome to the forum. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to remove stock exhaust and install aftermarket Slip-On Exhaust System Ninja 300 | SON1C | 2013 - 2017 Ninja 300 Tech Talk | 4 | August 14th, 2014 05:45 PM |
Full exhaust system, I NEED | Ausoi | Items Wanted | 2 | June 25th, 2013 08:07 AM |
New exhaust system | Drdoonta | 2008 - 2012 Ninja 250R Tech Talk | 14 | July 21st, 2012 12:32 PM |
Not another PLM exhaust install | icbm | 2008 - 2012 Ninja 250R Tech Talk | 16 | December 7th, 2011 07:18 AM |
PLM full exhaust opinion | pjed | 2008 - 2012 Ninja 250R Tech Talk | 16 | December 5th, 2011 11:16 AM |
|
|