August 29th, 2010, 01:51 PM | #1 |
ninjette.org member
Name: Mike
Location: Asheville NC
Join Date: Jan 2010 Motorcycle(s): 1974 CB360 2008 Black 250 Ninja Posts: 65
|
Matte finish muffler question
Any thoughts on taking a Scotchbrite pad to the chrome muffler can? Is it possible to achieve a nice satin finish, or will it just look scratched up? I seem to remember reading this on a different forum where people were getting good results.
|
|
August 29th, 2010, 02:04 PM | #2 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
mike,
yes you can dull the chrome to achieve a matte finish. i did this with sandpaper before i decided to paint my can black. |
|
August 29th, 2010, 02:41 PM | #3 |
ninjette.org member
Name: Mike
Location: Asheville NC
Join Date: Jan 2010 Motorcycle(s): 1974 CB360 2008 Black 250 Ninja Posts: 65
|
Thanks Vince, how did it look?
|
|
August 29th, 2010, 03:10 PM | #4 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
definitely better than the shiny monstrosity that is the stock can, but i prefer the painted look better, especially on a black bike. give it a shot - if nothing else, its the first step in prepping the can to be painted if decide to go with that option.
|
|
August 29th, 2010, 03:31 PM | #5 |
Resident Old Guy
Name: Kurt
Location: Goodyear, Az
Join Date: Jul 2010 Motorcycle(s): sold Posts: 264
|
What kind of paint did you use?
|
|
August 29th, 2010, 03:54 PM | #6 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
rustoleum hi-temp flat black
|
|
August 29th, 2010, 03:56 PM | #7 |
Wartown, USA
Name: Bryan
Location: Warner Robins, GA
Join Date: Nov 2009 Motorcycle(s): 2009 Ninja 250R SE, 2007 Ninja 650R, and assorted other bikes Posts: A lot.
|
Ill bet it would look nice bead-blasted too. If you have that capability.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
250r matte black | pomartin | Pictures | 18 | July 19th, 2012 02:41 AM |
Cleaning matte black | broken neck | Motorcycle Gear | 9 | June 29th, 2012 09:26 PM |
Question on single muffler 87ninja250r | Greatjobdani | 1986 - 2007 Ninja 250R Tech Talk | 2 | September 26th, 2011 01:40 PM |
matte black 250r | azimmer11 | General Motorcycling Discussion | 17 | August 12th, 2011 12:04 PM |
Aftermarket muffler question | bob706 | 2008 - 2012 Ninja 250R Tech Talk | 13 | April 12th, 2011 01:40 PM |
|
|